Avaya Ethernet Routing Switch Implementation and Maintenance - 3605 Free Exam Questions

A. The addition of a Redundant Power Supply 15 will be required to provide sufficient power to ensure the VoIP phones and WAP function property.

B. The addition of a
second
AC power supply will be required to provide sufficient power to the ERS - 4550T-PWR to Support all of-the PoE devices.

C. The 4550T-PWR will have sufficient power to support the 20 VoIP telephones and 5 WAP devices,

D. the power requirement of the WAP exceeds the individual port maximum power rating of the ERS 4550T-PWR and will therefore require an external power source.

A. message frequency

B. system status

C. syslog table location

D. severity level

A. An edge switch port

B. A VLAN

C. An OSPF protocol

D. A core switch port

A. The physical VLAN IP address is used as the DHCP relay agent.

B. The IP address of the DHCP relay agent is used.

C. The IP address of the core server VLAN is used

D. The virtual VLAN IP address is used as the DHCP relay agent.

A. the IP address of the IST VL AN on the peer switch . the IP address of the IST on the peer switch

B. the IP address of the ISTVLAN on the local switch

C. the management IP address of the peer switch

A. It captures packets copied to the CPU at a verbose level.

B. It shows CPU utilization.

C. It captures RCC IP events at verbose level.

D. It captures BGP events at a terse level.

A. Replace the two existing switch fabric modules with 8692SF and Supermezz.

B. Replace the six 8683XLR modules with 8612XLRS.

C. Replace the two existing switch fabric modules with 8394SF systems.

D. Replace the two existing 8616SXE modules with 8612XLRS modules.

A. an OSPF protocol

B. a core switch port

C. a VLAN

D. an MLT

A. 24

B. 28

C. 16

D. 26

A. Check for port alarms

B. Use enterprise Device Manager and select the Edit, Port, General tab from the navigation pane to display any XFP compatibility issues.

C. Show DWDM-XFP {default}.

D. Use
the
monitor
sys
tech info command to monitor
for
any changes
in compatibility.

A. Configure QoS on the default VLAN to support voice traffic.

B. Remove spanning tree from the default VLAN.

C. Remove all port members from default VLAN 1.

D. Assign an IP address to the default VLAN for switch management.

A. 50

B. 24

C. 16

D. 48

A. Simple Loop Prevention Protocol (SLPP)

B. Discard untagged frames

C. Virtual Link Aggregation Protocol (VLACP)

D. Extended control packet limit (ext-CP)

A. The path that IP traffic takes over an MLT or SMLT

B. The rate of IP traffic flow

C. Which port filter is best to use on MLT networks

D. Rate limiting for ICMP traffic

A. Customer MACs

B. Backbone MGIDs

C. VLAN MAC IDs

D. Backbone nodal MAC addresses