Cisco CCIE Routing and Switching Written - 400-101 Free Exam Questions

A. The network address is 10.88.100.0

B. The network address is 10.88.0.0

C. The broadcast address is 10.88.255.255

D. The broadcast address is 10.95.255.255

E. The network address is 10.64.0.0

F. The broadcast address is 10.64.255.255

A. Flow record

B. Master controller

C. SLA

D. Class

E. Border router

F. Policy

A. EIGRP preinstalls the feasible successor in the RIB in all cases, which causes traffic to switch more quickly.

B. EIGRP sends queries only if there is a feasible successor, which decreases the number of routers that are involved in convergence.

C. EIGRP sends queries only if there is not a feasible successor, which causes less control traffic to compete with data.

D. EIGRP immediately installs the loop-free alternative path in the RIB.

A. 802.1w spanning tree is being used.

B. This switch is the root bridge for VLAN1.

C. Setting the priority of this switch to 0 for VLAN 1would cause it to become the new root.

D. Spanning-tree PortFast should not be enabled on GigabitEthernet2/1.

E. Spanning tree PortFast is enabled on GigabitEthernet1/1.

A. Candidate

B. Running

C. Notification

D. Capabilities

E. Startup

F. State

A. AF41

B. AF11

C. AF13

D. AF43

A. MST supports up to four MST instances, including instance 0

B. switches in each path

C. Only one version of STP can be active on a device at one time

D. MST configurations are propagated throughout the VTP domain

E. To support load-balancing across redundant paths, the VAN-to-instance mapping must match on all

F. Rapid PVST+ and MST can be active on a device simultaneously

A. UDP Jitter for VoIP

B. UDP Jitter

C. ICMP Echo

D. ICMP Path Echo