Aruba Certified Mobility Professional 6.4 - ACMP-6.4 Free Exam Questions

A. A user can belong to only one role at a time.

B. Roles are assigned to users.

C. Roles are applied to interfaces.

D. Policies are built from roles.

E. Roles are a set of authentication rules

A. Authentication requests are sent in round-robin continuously to both RADIUS servers.

B. Authentication requests are sent to the second RADIUS server when the first RADIUS server denies (auth fail) the authentication request.

C. Only the first RADIUS server is used to process the authentication requests and the second RADIUS server is always a backup server.

D. The first five requests are sent to the first RADIUS server and the next five requests are sent to the second RADIUS server.

A. any any svc-icmp permit

B. user any svc-icmp permit

C. mswitch any svc-icmp permit

D. localip any svc-icmp permit

E. user user svc-icmp permit

A. A default Role can be directly assigned to an untrusted port

B. Roles are assigned to devices connected to a trusted port

C. The Role assigned to the untrusted port

D. Adding a wired AAA profile to a VLAN on the untrusted port

E. An initial Role can be assigned directly to the VLAN

A. SNR of an AP.

B. Number of clients connected to an AP.

C. Discovering APs

D. SSID of an AP

E. Operating mode of an AP

A. HA

B. ARM

C. VRRP

D. Backup LMS-IP

E. Backup AP group

A. There are not enough AP licenses to support the additional quantity of APs.

B. The problem APs are not getting an IP address.

C. There is a firewall between the problem APs and the controller blocking PAPI.

D. The controller does not support that many APs in a single AP-Group.

E. The problem APs have the wrong lms-ip address setting.

A. DNS of the controller

B. AP group

C. Static route

D. no changes needed

E. enable multicast

A. VRRP IP address

B. Loopback IP address of backup Aruba controller

C. management IP of the backup Aruba controller

D. management IP of an Aruba controller

E. HSRP IP address

A. Remote Node can only be configured using the CLI

B. A RN-Master can be either a Master or a Local controller

C. Remote Node is only used for Remote AP termination

D. Remote Node builds an Ipsec tunnel to Remote Node Master?

E. Only L3 configurations are pushed from a RN-Master to a Remote Node

A. The client is not a valid client

B. Only 2 APs can hear the client

C. No client was selected

D. No floor plan exists

A. optimal channels and power settings for APs

B. configured radio bands

C. radio type of the AP

D. lower power when unauthorized APs are detected

A. 12

B. 8

C. 3

D. 4

E. 9