Huawei HCIE-Enterprise Communication (Written) V1.0 - H11-879 Free Exam Questions

A. Automatic cascading does not require configuration of cascading sites

B. MCU cascade is divided into manual cascade and automatic cascade

C. Manual cascading requires scheduling of two conference templates

D. Manual cascading must configure GK routing

A. Same service area first

B. MCUs with the same prefix are preferred

C. The MCU with the most remaining resources in the same service area is preferred

D. Among all MCUs, the MCU with the most remaining resources is preferred

A. Under normal circumstances, the IP phone of the local node is registered at the central node

B. The POTS phone of the local node is registered on the local node

C. The central node and the local node are interconnected through SIP relay

D. The heartbeat mechanism between the central node and the local node monitors the operating status of the peer device

A. Correct

B. Wrong

A. The quantization level of the coding block jumps, resulting in sudden brightness changes at the boundary

B. The macro block is in the intense motion area, the difference is big, resulting in obvious edges

C. Deblocking filter (Deblocking) is not strong enough, resulting in not smooth edges

D. Unreasonable division of macroblock coding modes, resulting in false edges

A. When IP phones A and B have successfully registered to the same U1900 system, if IP phones A and B are able to dial each other, the U1900 system must include an MTU board

B. If IP phone A and analog phone C (directly connected to the ASI board of U1900) are successfully registered to U1900, when A calls C, U1900 may not contain MTU board

C. If you want to successfully register IP phones A and B to the U1900 system, the U1900 system must include the MTU board

D. When IP phone A and B have successfully registered to the same U1900 system, if IP phone A calls When calling IP phone B, IP phone B is busy, then if you need IP phone A to hear busy Line tone, the U1900 must contain MTU board

A. callroute->trunk-group->prefix

B. callroute->prefix->trunk-group

C. prefix->trunk-group->callroute

D. prefix->callroute->trunk-group

A. Office route selection code -> office route -> trunk -> prefix

B. Office route selection code -> Trunk -> Office route -> Prefix

C. Office route selection code -> Trunk -> Prefix -> Office route

D. Office route selection code -> prefix -> office route -> trunk