HP Delta-Aruba Certified Switching Professional - HPE6-A46 Free Exam Questions [2026]

QUESTION NO: 1
A network administrator sets up MAC-Auth and captive portal to Aruba ClearPass on AOS-Switches. The solution seems to work for most guests. However, some guests open their browsers and are not redirected to the captive portal.
How should the administrator address the likely cause of the issue?

A. Replace MAC-Auth on switch ports with Web-Auth because this authentication method offers more reliability with captive portal.

B. Reconfigure the captive portal URL hash key on some of the switches, which likely have the wrong password.

C. Set the RADIUS server time window to 0 because some guest computers likely have the incorrect system time.

D. Replace expired certificates on the switches and set their usage to captive portal since some guests have an HTTPS homepage.

Discussion 0

Correct Answer: D Vote an answer

QUESTION NO: 2
Refer to the exhibits.
Exhibit 1

Exhibit 2
Switch-1(config)# spanning-tree
Switch-1(config)# spanning-tree config-name "exam"
Switch-1(config)# spanning-tree instance 1 vlan 10-19
Switch-1(config)# spanning-tree instance 2 vlan 20-29
Switch-2(config)# spanning-tree
Switch-2(config)# spanning-tree config-name "exam"
Switch-2(config)# spanning-tree instance 1 vlan 10-19
Switch-2(config)# spanning-tree instance 2 vlan 20-29
Switch-2(config)# spanning-tree priority 0
Switch-2(config)# spanning-tree instance 1 priority 0
Switch-2(config)# spanning-tree instance 2 priority 1
Switch-3(config)# spanning-tree
Switch-3(config)# spanning-tree config-name "exam"
Switch-3(config)# spanning-tree instance 1 vlan 10-19
Switch-3(config)# spanning-tree instance 2 vlan 20-29
Switch-3(config)# spanning-tree priority 1
Switch-3(config)# spanning-tree instance 1 priority 1
Switch-3(config)# spanning-tree instance 2 priority 0
Switch-4(config)# spanning-tree
Switch-4(config)# spanning-tree config-name "exam"
Switch-4(config)# spanning-tree instance 1 vlan 10-19
Switch-4(config)# spanning-tree instance 2 vlan 20-29
The network administrator enters the commands shown in Exhibit 2. What is the spanning tree status on A1 and A2?

A. A1 forwards traffic, and A2 blocks traffic.

B. Both A1 and A2 block traffic.

C. Both A1 and A2 forward traffic.

D. A1 blocks traffic, and A2 forwards traffic.

Discussion 0

Correct Answer: A Vote an answer

QUESTION NO: 3
Refer to the exhibit.

Switch-1 and Switch-2 are configured to provide VRRP in VLAN 2. Based on the output, what will happen when a client in VLAN 2 sends an ARP request for its default gateway IP address?

A. Only Switch-2 will respond, and it will respond with its own MAC address.

B. Both Switch-1 and Switch-2 will respond, and both will respond with the virtual MAC address for VRID 2.

C. Only Switch-2 will respond, and it will respond with the virtual MAC address for VRID 2.

D. Both Switch-1 and Switch-2 will respond, and each will respond with its own MAC Address.

Discussion 0

Correct Answer: C Vote an answer

QUESTION NO: 4
Refer to the exhibit.

The network administrator wants to reduce failover time if a switch link in VLAN 100 goes down. What should the administrator do?

A. Configure echo mode BFD on VLAN 100 on all OSPF routing devices on VLAN 100.

B. Lower the hello timer only on the BDR of VLAN 100.

C. Configure graceful restart on all of the OSPF routing devices on VLAN 100.

D. Lower the dead timer on the BDR of VLAN 100.

Discussion 0

Correct Answer: A Vote an answer

QUESTION NO: 5
An architect proposes several Aruba 2930M switches, which the customer wants to combine into a single logical switch. What must be included in the proposal to meet this requirement?

A. QSFP+ fiber transceivers and 40GbE to 10GbE cable splitters

B. QSFP+ fiber transceivers and MPO cable

C. backplane stacking license

D. backplane stacking modules and cables

Discussion 0

Correct Answer: D Vote an answer

QUESTION NO: 6
A company wants to implement 802.1X authentication to authenticate client devices on AOS-Switch ports.
The company has a RADIUS server that uses PEAP MSCHAP-v2 for the authentication method. What is one task administrators should complete before they implement the plan?

A. Install personal certificates on client devices.

B. Ensure client devices trust the RADIUS server certificate.

C. Set up an isolated VLAN in the network for the 802.1X communications.

D. Configure DHCP services on the AOS-Switches for pre-authenticated clients.

Discussion 0

Correct Answer: C Vote an answer

QUESTION NO: 7
Refer to the exhibit.

A network administrator needs to alter myACL so that it permits all traffic that arrives in VLAN 2 and is destined to 10.1.10.0/24. Besides this change, the ACL must continue to act as it does now. The administrator plans this new rule:
permit ip any 10.1.10.0/24
How should the administrator apply this rule to meet all requirements?

A. Enable ACL grouping on the switch. Add the new rule in a new ACL. Then, group the new ACL with myACL.

B. Apply the new rule without a rule ID to ensure that the switch applies the automatic processing order to it.

C. Remove the ACL from the VLAN and re-apply it as an inbound VLAN ACL (VACL). Then, add the new rule with any ID higher than 2.

D. Resequence the ACL with more space, then add the new rule with a sequence ID before the ID for the current third rule.

Discussion 0

Correct Answer: D Vote an answer

QUESTION NO: 8
A network administrator needs to set up an AOS-Switch to use port-based tunneled node for connected devices. However, the administrator wants the switch to forward traffic without tunneling if it cannot reach a tunneled-node server.
What should the administrator do?

A. Apply the tunneled-node profile to ports, and set the local-switching-fallback option.

B. Set the switch to role-based tunneled node, and make sure it uses the default initial user role.

C. Make sure that the switch has an IP address on the untagged VLAN assigned to the ports.

D. Configure a local switching profile on the Mobility Controller that acts as tunneled-node server.

Discussion 0

Correct Answer: B Vote an answer

QUESTION NO: 9
Two 5400R AOS-Switches are OSPF neighbors. The network administrator wants routing paths to update as quickly as possible in the event of a failure on a neighboring switch.
Which technology should the administrator implement on the connected switch interfaces?

A. MAC Lockdown

B. Spanning Tree Root Guard

C. Bidirectional Forwarding Detection (BFD)

D. Unidirectional Link Detection (UDLD)

Discussion 0

Correct Answer: C Vote an answer

QUESTION NO: 10
Network administrators need to track when traffic matches deny entry in an ACL applied to a port. They want the alert to be sent to a syslog server that is already set up to send logs.
What should administrators do to enable alerts?

A. Specify the log option for the ACL entry, and enable ACL debugging.

B. Specify the log option for the ACL entry, and enable SNMP port security traps.

C. Enable ACL debugging, and enable SNMP port security traps.

D. Set the debug destination to session, and enable ACL debugging.

Discussion 0

Correct Answer: B Vote an answer

QUESTION NO: 11
Refer to the exhibits.
Exhibit 1

Exhibit 2

Exhibit 2 shows IGMP groups on Switch-2, which runs IGMP but not PIM. Switch-1 and Switch-3 do not have IGMP or PIM enabled. Client 1 begins to forward multicasts to 239.1.1.1.
Which clients receive the multicasts?

A. Client 2, but not any of the other clients

B. Client 3, but not any of the other clients

C. Client 3 and Client 4, but not Client 2

D. Client 2, Client 3, and Client 4

Discussion 0

Correct Answer: A Vote an answer

QUESTION NO: 12
Network administrators need to configure a BGP neighbor on an AOS-Switch. What defines the neighbor as an iBGP neighbor?

A. Its update source is set to a private company IP address.

B. It has BGP synchronization enabled.

C. Its remote-AS is the same as the AOS-Switch BGP AS.

D. It has an AS number in the range of 64512 to 64535.

Discussion 0

Correct Answer: C Vote an answer

QUESTION NO: 13
Refer to the exhibit.

The company wants the fastest convergence and best load sharing of traffic over the links between Switch-1 and the VSF fabric. Which technology should the network administrator implement on these links?

A. RPVST+

B. LACP

C. MSTP

D. loop protection

Discussion 0

Correct Answer: B Vote an answer

QUESTION NO: 14
Refer to the exhibits.
Exhibit 1

Exhibit 2

The network administrator enters the commands shown in Exhibit 2. What is the spanning tree status on A1 and A2?

A. A1 forwards traffic, and A2 blocks traffic.

B. Both A1 and A2 block traffic.

C. Both A1 and A2 forward traffic.

D. A1 blocks traffic, and A2 forwards traffic.

Discussion 0

Correct Answer: B Vote an answer

QUALITY AND VALUE

Tested and Approved

Easy to Pass

Try Before Buy

RECENT DISCUSSIONS

Useful Links

Contact Us