Juniper Data Center, Associate (JNCIA-DC) - JN0-281 Free Exam Questions

A. Trunk

B. Aggregated

C. Tunnel

D. Access

A. Traceoptions

B. Route summarization

C. Ping

D. SNMP

A. To statically define a route to a specific destination

B. To summarize and reduce the number of routes in the routing table

C. To filter unwanted traffic

D. To dynamically adjust to network changes

A. The BGP group is configured to attempt an EBGP peering session with 192.168.100.1.

B. The configuration will not pass the commit check.

C. The configuration will pass the commit check.

D. The BGP group is configured to attempt an EBGP peering session with 192.168.100.2.

A. By enabling the identification and separation of traffic belonging to different VLANs.

B. By ensuring the same IP address range can be used in different VLANs.

C. By providing a backup path for data in case of link failure.

D. By encrypting data traffic between VLANs.

A. BGP peers advertise routes from EBGP peers to other IBGP peers using its own address as the next hop.

B. BGP peers advertise routes received from IBGP peers to other IBGP peers.

C. BGP peers advertise routes received from EBGP peers to other IBGP peers.

D. BGP peers advertise routes from IBGP peers to EBGP peers using its own address as the next hop.

A. Update

B. Notification

C. Keepalive

D. Open

A. Bidirectional Forwarding Detection (BFD)

B. link aggregation groups

C. Virtual Chassis

D. graceful restart (GR)

A. Internal routing within a single autonomous system

B. Connecting different autonomous systems and route sharing

C. Encrypting data traffic between networks

D. Providing Layer 2 connectivity

A. It will flood it out of all interfaces, except for the directly connected VLAN.

B. It will flood it out of all interfaces, except for the next-hop interface.

C. It will flood it out of all interfaces, except for the ingress interface.

D. It will flood it out of all interfaces.

A. Local Preference

B. Origin

C. MED

D. AS Path Length

A. 130

B. 10

C. 15

D. 5