QUESTION NO: 1
You are logged into a router and issue the command show route protocol bgp. You see that you have received the route 10 0.4/24 from two different peers Both peers were learned using IBGP and Local-Preference. MED, Origin, and AS-path are equal.
Which criterion is used for this situation?
You are logged into a router and issue the command show route protocol bgp. You see that you have received the route 10 0.4/24 from two different peers Both peers were learned using IBGP and Local-Preference. MED, Origin, and AS-path are equal.
Which criterion is used for this situation?
Correct Answer: A
Vote an answer
QUESTION NO: 2
After configuring OSPF between two routers you check for an adjacency. You see that the adjacencies are not coming up on an Ethernet segment.
What are two reasons that would cause this situation? (Choose two)
After configuring OSPF between two routers you check for an adjacency. You see that the adjacencies are not coming up on an Ethernet segment.
What are two reasons that would cause this situation? (Choose two)
Correct Answer: A,B
Vote an answer
QUESTION NO: 3
-- Exhibit --
user@R1> show
interfaces {
ge-1/1/0 {
unit 0 {
family inet {
address 10.100.1.1/30;
}
family iso;
}
}
lo0 {
unit 0 {
family inet {
address 10.100.10.1/32;
}
family iso {
address 49.1001.0010.0100.00;
}
}
}
}
protocols {
isis {
level 1 disable;
interface ge-1/1/0.0 {
level 2 disable;
}
interface lo0.0;
}
}
user@R2> show
interfaces {
ge-1/1/0 {
unit 0 {
family inet {
address 10.100.1.2/30;
}
family iso {
mtu 1496;
}
}
}
lo0 {
unit 0 {
family inet {
address 10.100.10.2/32;
}
family iso {
address 49.1002.0010.0200.00;
}
}
}
}
protocols {
isis {
interface ge-1/1/0.0 {
level 2 disable;
}
interface lo0.0;
}
}
-- Exhibit --
Click the Exhibit button.
Referring to the exhibit, R1 and R2 are directly connected using interface ge-1/1/0.
What is the reason the IS-IS adjacency fails?
-- Exhibit --
user@R1> show
interfaces {
ge-1/1/0 {
unit 0 {
family inet {
address 10.100.1.1/30;
}
family iso;
}
}
lo0 {
unit 0 {
family inet {
address 10.100.10.1/32;
}
family iso {
address 49.1001.0010.0100.00;
}
}
}
}
protocols {
isis {
level 1 disable;
interface ge-1/1/0.0 {
level 2 disable;
}
interface lo0.0;
}
}
user@R2> show
interfaces {
ge-1/1/0 {
unit 0 {
family inet {
address 10.100.1.2/30;
}
family iso {
mtu 1496;
}
}
}
lo0 {
unit 0 {
family inet {
address 10.100.10.2/32;
}
family iso {
address 49.1002.0010.0200.00;
}
}
}
}
protocols {
isis {
interface ge-1/1/0.0 {
level 2 disable;
}
interface lo0.0;
}
}
-- Exhibit --
Click the Exhibit button.
Referring to the exhibit, R1 and R2 are directly connected using interface ge-1/1/0.
What is the reason the IS-IS adjacency fails?
Correct Answer: C
Vote an answer
QUESTION NO: 4
You are asked to configure and apply a new routing policy to influence routing advertisements sent to a specific EBGP peer. You must ensure that the new policy does not impact routing advertisements sent to any other peer.
In this scenario, which statement is true?
You are asked to configure and apply a new routing policy to influence routing advertisements sent to a specific EBGP peer. You must ensure that the new policy does not impact routing advertisements sent to any other peer.
In this scenario, which statement is true?
Correct Answer: D
Vote an answer
Explanation: Only visible for Actual4test members. You can sign-up / login (it's free).
QUESTION NO: 5
Which protocol is used by wired Ethernet to manage frame collisions?
Which protocol is used by wired Ethernet to manage frame collisions?
Correct Answer: C
Vote an answer
QUESTION NO: 6
Click the Exhibit button.
Two bridge domains are configured as shown in the exhibit.
What must be configured as part of the ge-1/0/3 interface configuration to accept tagged frames of VLANs 100 and 200?
Click the Exhibit button.
Two bridge domains are configured as shown in the exhibit.
What must be configured as part of the ge-1/0/3 interface configuration to accept tagged frames of VLANs 100 and 200?
Correct Answer: A
Vote an answer
QUESTION NO: 7
You are logged into a router and have navigated to the [edit routing-options] level of the hierarchy. You have been asked to define an aggregate route for 172.30/16.
Which command correctly configures this setup?
You are logged into a router and have navigated to the [edit routing-options] level of the hierarchy. You have been asked to define an aggregate route for 172.30/16.
Which command correctly configures this setup?
Correct Answer: D
Vote an answer
QUESTION NO: 8
Which two values displayed in the output from the show spanning-tree MSTP configuration command must match on all switches participating in the same MSTP region? (Choose two)
Which two values displayed in the output from the show spanning-tree MSTP configuration command must match on all switches participating in the same MSTP region? (Choose two)
Correct Answer: A,B
Vote an answer
QUESTION NO: 9
Which LSA packet types are originated only by an OSPF ABR router?
Which LSA packet types are originated only by an OSPF ABR router?
Correct Answer: D
Vote an answer
QUESTION NO: 10
Which packet type does the router use to request up-to-date link-state information?
Which packet type does the router use to request up-to-date link-state information?
Correct Answer: D
Vote an answer
QUESTION NO: 11
Which OSPF LSA type is sent from the ABR to describe an ASBR that is in an area to which it is connected?
Which OSPF LSA type is sent from the ABR to describe an ASBR that is in an area to which it is connected?
Correct Answer: A
Vote an answer