Juniper Enterprise Routing and Switching - JN0-647 Free Exam Questions

A. The satellite device has 14 network-facing ports available.

B. The satellite device is in a state of transition.

C. The satellite device has two ports that are not online.

D. The satellite device can support up to 48 total ports.

A. When multiple election methods are implemented on a device, the static method is preferred.

B. The auto-RP method requires using two PIM dense mode groups from the 323/8 range.

C. The static method requires configuration on all devices in the PIM domain.

D. With the bootstrap method, the primary criterion for electing a BSR is priority value.

E. The auto-RP method includes the ability to maintain a backup RP.

A. Authentication credentials for specific devices can be preconfigured on the switch for automatic authentication.

B. Captive portal can be configured to only prompt for credentials when HTTP or HTTPS traffic is requested on a port to allow on-HTTP enabled devices access to the network.

C. LLDP can be used to query the type of device that is attempting to access the network, and predefined device types can be allowed to bypass the captive portal process.

D. A MAC address white list can be configured on the switch to allow specific MAC addresses to bypass the captive portal process.

A. Remove the reject-routes policy to longer.

B. Remove the reject-routes policy.

C. Remove the export-to- as81 policy to or longer.

D. Remove the export-to- as81 policy.

A. Traffic handled by the s-1 scheduler is serviced immediately before traffic being serviced by the s-4 scheduler.

B. Traffic handled by the s-1 scheduler is serviced immediately after traffic being serviced by the s-2 scheduler.

C. Traffic handled by the s-1 scheduler is serviced immediately before traffic being serviced by the s-2 scheduler.

D. Traffic handled by the s-1 scheduler is serviced immediately after traffic being serviced by the s-4 scheduler.

A. You should configure a server-reject VLAN to the interfaces and isolate that VLAN to Internet access only.

B. You must add a RADIUS account for each user and assign them to the appropriate VLAN.

C. You should assign a guest VLAN to the interfaces and isolate that VLAN to Internet access only.

D. You should ensure that the server-fail fallback feature is enabled and users are assigned to the appropriate VLAN.

A. Source, R1, R2, R5, R6, Receiver

B. Source, R1, R2, R3, R6, Receiver

C. Source, R1, R2, R5, R2, R3, R6 Receiver

D. Source, R1, R4, R5, R6, Receiver

A. To share RIP routes with the OSPF network, an export policy will be required on the ABR.

B. By default, external OSPF routes have a higher route preference than RIP routes.

C. To share RIP routes with the OSPF network, an export policy will be required on the ASBR.

D. By default, RIP routes have a higher route preference than external OSPF routes.