USGBC LEED AP Homes (Residential) - LEED-AP-Homes Free Exam Questions

A. 1

B. 3

C. 2

D. 0.5

A. To equalize credit requirements in all locations

B. To identify difficult credit requirements, based on location

C. To provide additional points to projects depending on the building type

D. To enhance the ability of LEED project teams to address critical environmental issues for the project's location

A. Fixture flow rates, number of bedrooms, and bathrooms

B. Size of shower compartments, fixture flow rate, and number of shower heads

C. Size of plumbing piping to fixtures, fixture flow rates, and number of bathrooms

D. Number of recirculating shower systems, fixture flow rates, and number of bedrooms

A. Points are awarded at particular levels of achievement

B. Points are awarded at the minimum threshold

C. Points are awarded when the maximum threshold has been exceeded

D. Points are awarded at the maximum threshold

A. Ventilation and filtration

B. Dehumidification and filtration

C. Pressurization and dehumidification

D. Infiltration and ventilation

A. Install landscaping within 24 in. (0.6 m) of home

B. Treat all wood framing with a borate product to a minimum of 3 ft. (0.9 m) below foundation

C. Use treated wood for all wood-to-concrete connections

D. Treat all material with a borate product

A. Has a floor area of no more than 1,000 in² (0.6 m²) with all fixtures within the compartment counting separately for calculation purposes

B. Has a floor area of no more than 2,500 in² (1.6 m²) with all fixtures within the compartment counting separately for calculation purposes

C. Has a floor area of no more than 5,000 in² (3.2 m²) with all fixtures within the compartment counting as a single fixture for calculation purposes

D. Has a floor area of no more than 2,500 in² (1.6 m²) with all fixtures within the compartment counting as a single fixture for calculation purposes

A. Achieve more than 95% of the component by weight or volume that meets Option 1: Local Production

B. Meet more than two or more of the criteria under Option 2: Environmentally Preferable Products

C. Meet both Option 1: Local Production and Option 2: Environmentally Preferable Products

D. Achieve more than 95% of the component by weight or volume that meets Option 2: Environmentally Preferable Products

A. Collect all vendor chain of custody (COC) certificates to document the use of FSC certified materials

B. Notify all suppliers of project requirement for Forest Stewardship Council (FSC) certified lumber

C. Purchase all lumber from Sustainable Forestry Initiative (SFI) certified mills

D. Include Sustainable Forestry Initiative (SFI) certified lumber in all plans and specifications

A. Little-to-no benefit since precipitation is seasonal

B. Helps to offset air pollution

C. Keeps water out of storm sewers

D. Helps to maintain required firewater levels