HP HPE6-A46 Actual Tests : Delta-Aruba Certified Switching Professional Exam

Refer to the exhibits.
Exhibit 1

Exhibit 2
Switch-1(config)# spanning-tree
Switch-1(config)# spanning-tree config-name "exam"
Switch-1(config)# spanning-tree instance 1 vlan 10-19
Switch-1(config)# spanning-tree instance 2 vlan 20-29
Switch-2(config)# spanning-tree
Switch-2(config)# spanning-tree config-name "exam"
Switch-2(config)# spanning-tree instance 1 vlan 10-19
Switch-2(config)# spanning-tree instance 2 vlan 20-29
Switch-2(config)# spanning-tree priority 0
Switch-2(config)# spanning-tree instance 1 priority 0
Switch-2(config)# spanning-tree instance 2 priority 1
Switch-3(config)# spanning-tree
Switch-3(config)# spanning-tree config-name "exam"
Switch-3(config)# spanning-tree instance 1 vlan 10-19
Switch-3(config)# spanning-tree instance 2 vlan 20-29
Switch-3(config)# spanning-tree priority 1
Switch-3(config)# spanning-tree instance 1 priority 1
Switch-3(config)# spanning-tree instance 2 priority 0
Switch-4(config)# spanning-tree
Switch-4(config)# spanning-tree config-name "exam"
Switch-4(config)# spanning-tree instance 1 vlan 10-19
Switch-4(config)# spanning-tree instance 2 vlan 20-29
The network administrator enters the commands shown in Exhibit 2. What is the spanning tree status on A1 and A2?

• A. A1 forwards traffic, and A2 blocks traffic.
• B. Both A1 and A2 block traffic.
• C. Both A1 and A2 forward traffic.
• D. A1 blocks traffic, and A2 forwards traffic.

Refer to the exhibits
Exhibit 1

Exhibit 2

Both Switch-1 and Switch-2 have an OSPF inter-area route to 10.2.0.0/16 with metric 10 in their IP routing table. Switch-3 has the default setting for ECMP. Based on the exhibits, what should the Switch-3 routing table display if the network operates as normal?

• A. a route to 10.2.0.0/16 through 10.1.0.5
• B. two routes to 10.2.0.0/16 through both 10.1.0.1 and 10.1.0.5
• C. a route to 10.2.0.0/16 through 10.1.0.1
• D. no route to 10.2.0.0/16

Refer to the exhibit.

Several interfaces on an AOS-Switch enforce 802.1X to a Radius server at 10.254.202.202. The interface
802.1X settings are shown in the exhibit, and 802.1X is also enabled globally. The security team have added a requirement for port security on the interfaces as well. Before administrators enable port security, which additional step must they complete to prevent issues?

• A. Enable eavesdropping protection on the interfaces.
• B. Set an 802.1X client limit on the interfaces.
• C. Manually add legitimate MAC addresses to the switch authorized MAC list.
• D. Enable DHCP snooping on VLAN 20.

A network administrator needs to create a backplane stack with four AOS-Switches. The administrator wants to choose which switch becomes the commander. Which procedure meets those needs?

• A. Boot up the desired commander first and make sure stacking is enabled on it. Then, connect the stacking links and boot the other switches.
• B. Configure backplane switching settings on each switch while disconnected. Make sure the desired commander has member ID 1. Then, connect the switches.
• C. Boot all of the switches at the same time and then connect the backplane stacking links. Then, access the desired commander, and make sure it has member ID 1.
• D. Configure backplane switches settings on each switch while disconnected. Make sure the desired commander has priority value 1. Then, connect the switches.

Two 5400R AOS-Switches are OSPF neighbors. The network administrator wants routing paths to update as quickly as possible in the event of a failure on a neighboring switch.
Which technology should the administrator implement on the connected switch interfaces?

• A. MAC Lockdown
• B. Spanning Tree Root Guard
• C. Bidirectional Forwarding Detection (BFD)
• D. Unidirectional Link Detection (UDLD)