H3C GB0-341-ENU Actual Tests : H3CSE-WLAN

Short on time before your GB0-341-ENU exam? Actual4test packs 270 focused practice questions for the H3CSE-WLAN exam into formats you can study anywhere, so every spare hour still counts.

H3C GB0-341-ENU Exam Overview:

H3C GB0-341-ENU Exam Syllabus Topics:

Everything You Want to Know About the H3C GB0-341-ENU Exam

H3CSE-WLAN Sample Questions:

Question 1

Use the wireless bridging function to realize one-to-one or one-to-many wireless connections between P FAT APs. To ensure the effective bandwidth of each link, the number of connected PAPs should not be too large.

A. False
B. True

Question 2

802.11a/g uses different modulation techniques, for example, when QPSK is used, each sub-channel encodes 250Kbit/s of data, and the channel number rate can reach how many Mbit/s?

A. 24
B. 6
C. 12
D. 9

Question 3

H HC 3C wireless controller can view the detailed information of P AP registration through the command "display wlan ap all verbose". The following output is the detailed information of an AP viewed through this command.
Based on the above information, you can know _________. (Multiple choice)

A. This AP has been registered and online for 42 minutes and 50 seconds. It can be judged whether this AP has been offline based on the running time of the wireless controller.
B. Last Join Address indicates the IP address used when the AP successfully established a link with the AC last time. When the AP is disconnected, you can try to telnet to the AP device through this address.
C. Admin State is DOWN, indicating that the AP's radio may be in the disabled state.
D. The model of this AP is WA2100-AG, the status is RUN (successfully registered), and the IP address is 192.168.0.125
E. There are currently no users on this AP because the Running Clients Count is 0.

Question 4

When using a WLAN dual-frequency combiner to expand the capacity of an indoor distributed system, which of the following statements is correct? (Multiple choice)

A. The WLAN combined channel expansion solution can increase the overall WLAN system capacity by combining two APs using different channels.
B. When using this combined circuit expansion solution, the insertion loss introduced by the WLAN combiner is about 2dB, which needs to be taken into account when calculating the signal strength.
C. At present, this expansion program due to the restriction device characteristics, supports only channel 1 and channel 11 a road expansion, but the two-port multiplexer which then channel 1 of the AP, which then channel 11 of the AP and not strictly limited.
D. During project implementation, if FIT AP is used for WLAN dual-frequency combining, it is recommended to enable the load sharing function of the wireless controller + FIT AP, so that wireless users can be evenly connected to two APs, avoiding a lot of users on one AP. Rarely happens to users on another AP.

Question 5

In the configuration of the wireless controller, if the wlan service-o template 2 crypto command is included, it means that wireless service may be _____. (Multiple choice)

A. Enable WEP encryption
B. Enable WPA authentication encryption
C. No authentication and no encryption
D. Enable PSK authentication encryption

Solutions: