Here are all the actual test exam dumps for IT exams. Most people prepare for the actual exams with our test dumps to pass their exams. So it's critical to choose and actual test pdf to succeed.

2022 Realistic MTCNA Dumps Exam Tips Test Pdf Exam Material [Q27-Q47]

Share

2022 Realistic MTCNA Dumps Exam Tips Test Pdf Exam Material

Powerful MTCNA PDF Dumps for MTCNA Questions

NEW QUESTION 27
Router A and B are both running as PPPoE servers on different broadcast domains of your network. It is possible to set Router A to use "/ppp secret" accounts from Router B to authenticate PPPoE customers.

  • A. false
  • B. true

Answer: A

 

NEW QUESTION 28
When sending out an ARP request, an IP host is expecting what kind of address for an answer?

  • A. VLAN ID
  • B. 802.11g
  • C. MAC Address
  • D. IP address

Answer: C

 

NEW QUESTION 29
A network ready device is directly connected to a MikroTik RouterBOARD 750 with a correct U.T.P. RJ45 functioning cable. The device is configured with an IPv4 address of 192.168.100.70 using a subnet mask of
255.255.255.252. What will be a valid IPv4 address for the RouterBOARD 750 for a successful connection to the device?

  • A. 192.168.100.70/255.255.255.252
  • B. 192.168.100.68/255.255.255.252
  • C. 192.168.100.69/255.255.255.252
  • D. 192.168.100.71/255.255.255.252

Answer: C

 

NEW QUESTION 30
You would like to allow multiple logins with one user name on a Hot-Spot server. How should this be configured?

  • A. It's not possible
  • B. Set "Shared Users" option at /ip Hot-Spot
  • C. Set "only-one=no' at /ip Hot-Spot
  • D. Set "Shared Users" option at /ip Hot-Spot user profile

Answer: D

 

NEW QUESTION 31
Which of the protocols below is used by Netinstall?

  • A. rarp
  • B. bootp
  • C. arp
  • D. dhcp

Answer: B

 

NEW QUESTION 32
Which one of the following is true regarding VLANs?

  • A. VTP is used to send VLAN information to switches in a configured VTP domain.
  • B. You should not have more than 10 switches in the same VTP domain.
  • C. Two VLANs are configured by default on all Cisco switches.
  • D. VLANs only work if you have a complete Cisco switched internetwork. No off-brand switches are allowed.

Answer: A

 

NEW QUESTION 33
A DHCP server is configured on a LAN interface which is a port on a bridge. The DHCP server does not start.
What could be the reason(s)?

  • A. The IP address pool could be incorrectly defined
  • B. The DHCP server can not run on an interface which is also a bridge port
  • C. There might not be an IP address assigned to the LAN Interface
  • D. There may be multiple IP addresses set on the LAN interface

Answer: B

 

NEW QUESTION 34
If you use either Telnet or FTP, which is the highest layer you are using to transmit data?

  • A. Session
  • B. Transport
  • C. Application
  • D. Presentation

Answer: C

 

NEW QUESTION 35
Evaluate the following information:
Access Point configuration:
-- wlan1 is in 'AP-Bridge' mode
-- Bridge1 has wlan1 and ether1 as ports
CPE configuration:
-- wlan1 is in 'Station-Bridge' mode
-- Bridge1 has wlan1 and ether1 as ports
Select protocols that will pass from ether1 on the CPE to ether1 on the Access Point.

  • A. IPv6
  • B. PPPoE
  • C. ARP
  • D. IPv4
  • E. Firewire
  • F. BGP
  • G. USB
  • H. DHCP

Answer: A,B,C,D,H

 

NEW QUESTION 36
What is the correct action to be specified in the NAT rule to hide a private network when communicating to the outside world?

  • A. allow
  • B. passthrough
  • C. masquerade
  • D. tarpit

Answer: C

 

NEW QUESTION 37
What is the meaning of letter "R" on an active session in the menu PPP Active Connections?

  • A. Running
  • B. Remote
  • C. Radius

Answer: C

 

NEW QUESTION 38
What wireless card can we use to achieve 100 Mbps actual wireless throughput?

  • A. 802.11 b/g
  • B. 802.11 a/b/g
  • C. 802.11 a/n
  • D. 802.11 a/b/g/n
  • E. 802.11 a

Answer: A

 

NEW QUESTION 39
A client uses a RouterBOARD1000. The clock is configured in '/system clock'. The clock resets to default after each reboot.
Select the best solution for the problem.

  • A. Configure '/system ntp client' and set a valid and reachable NTP server address.
  • B. Configure '/system ntp server' and set a valid and reachable NTP client address.
  • C. Write a script in '/system script' to set the clock
  • D. Open the router and ensure the CMOS battery is fine.

Answer: A

 

NEW QUESTION 40
What protocols are used to configure trunking on a switch?
VLAN Trunking Protocol
VLAN
802.1Q
ISL

  • A. 1 only
  • B. 2 only
  • C. 3 and 4
  • D. 1 and 2

Answer: C

 

NEW QUESTION 41
In which situations Netinstall can not be used to install RouterOS on a RouterBOARD?

  • A. The router does not have an operating system
  • B. The router is connected only to a wireless network
  • C. The password of the router is not known
  • D. The router is connected only to a secondary Ethernet port

Answer: B

 

NEW QUESTION 42
Bridging loops can be avoided by enabling:

  • A. STP protocol
  • B. ICMP filter
  • C. UDP filter
  • D. RSTP protocol
  • E. Connection tracking

Answer: A,D

 

NEW QUESTION 43
Using wireless connect-list it's possible to prioritize connection to one Access Point over another Access Point by changing the order of the entries.

  • A. False
  • B. True

Answer: A

 

NEW QUESTION 44
What is term for the hardware coded address found on an interface?

  • A. IP Address
  • B. Interface Address
  • C. MAC Address
  • D. FQDN Address

Answer: C

 

NEW QUESTION 45
/interface wireless access-list is used for

  • A. Authenticate Hot-Spot users
  • B. Handles a list of Client's MAC Address to permit/deny connection to AP
  • C. Shows a list of Client's MAC Address that are already registered at AP
  • D. Contains the security profiles settings

Answer: C

 

NEW QUESTION 46
Simple Queue number 0 defines 2M for upload and download for target IP 10.10.0.33.
Simple Queue number 1 defines 4M for upload and download for target IP 10.10.0.33. Client
10.10.0.33 is be able to obtain

  • A. 6M upload/download
  • B. 4M upload/download
  • C. 2M upload/download
  • D. 0M upload/download

Answer: C

 

NEW QUESTION 47
......


How to book the MikroTik Certified Network Associate (MTCNA) Exam

You have to follow these steps to participate in the MikroTik Certified Network Associate (MTCNA) exam:

  • Step 1: Hover on to the training portal of MikroTik
  • Step 2: Prepare and take the MTCNA exam test
  • Step 3: Select your exam i.e. MTCNA
  • Step 4: Click the link available
  • Step 5: Create a new account and log in
  • Step 6: Follow the instructions to schedule your exam

 

Guaranteed Accomplishment with Newest Oct-2022 FREE: https://www.actual4test.com/MTCNA_examcollection.html

Authentic MTCNA Dumps - Free PDF Questions to Pass: https://drive.google.com/open?id=102esCQGdGPiDUtKCdgt3lXX5XIb-QeVK