2025 Latest 200-201 DUMPS Q&As with Explanations Verified & Correct Answers
200-201 dumps Exam Material with 332 Questions
The Cisco 200-201 exam consists of 100 multiple-choice questions that must be completed within 120 minutes. To successfully pass the exam, candidates must score a minimum of 750 out of 1000 points. 200-201 exam can be taken at any authorized Pearson VUE testing center, and the cost of the exam is $300 USD. Upon passing the exam, candidates will receive the Cisco Certified CyberOps Associate certification, which is a valuable credential in the field of cybersecurity operations.
Cisco 200-201 exam consists of multiple-choice questions that cover a wide range of topics related to cybersecurity operations. 200-201 exam is designed to test the candidate's ability to apply concepts and principles to real-world scenarios. 200-201 exam is also designed to test the candidate's ability to analyze data and make informed decisions based on that data. Candidates must pass the exam to obtain the Cisco CyberOps Associate certification.
NEW QUESTION # 50
Refer to the exhibit.
Drag and drop the element name from the left onto the correct piece of the PCAP file on the right.
Answer:
Explanation:
Explanation:
In a PCAP file, which is used to capture network packets, each packet contains various pieces of information that can be analyzed. The source and destination addresses refer to the IP addresses of the sender and receiver of the packets. The source and destination ports refer to the port numbers used for the communication, with common ports like 443 indicating HTTPS traffic. The network protocol here is TCP, which is responsible for establishing a connection and ensuring the delivery of packets. The transport protocol is IPv4, which is the underlying protocol for routing packets across the network. Lastly, the application protocol is TLS v1.2, which is used for secure communication over the internet.
References := The Understanding Cisco Cybersecurity Operations Fundamentals (CBROPS) course material covers the analysis of network traffic and the interpretation of PCAP files, which includes identifying the different elements within a packet capture1.
NEW QUESTION # 51
What is rule-based detection when compared to statistical detection?
- A. falsification of a user's identity
- B. likelihood of user's action
- C. proof of a user's action
- D. proof of a user's identity
Answer: C
NEW QUESTION # 52
Which event is a vishing attack?
- A. setting up a rogue access point near a public hotspot
- B. impersonating a tech support agent during a phone call
- C. obtaining disposed documents from an organization
- D. using a vulnerability scanner on a corporate network
Answer: B
NEW QUESTION # 53
Which attack is the network vulnerable to when a stream cipher like RC4 is used twice with the same key?
- A. ciphertext-only attack
- B. forgery attack
- C. plaintext-only attack
- D. meet-in-the-middle attack
Answer: A
Explanation:
When a stream cipher like RC4 is used twice with the same key, it becomes vulnerable to a ciphertext-only attack. In this type of attack, the attacker has access to several ciphertexts that are encrypted with the same key but does not know anything about the plaintexts. By analyzing these ciphertexts, an attacker can gain insights into the plaintext or even recover parts or all of it. References := Cisco Cybersecurity source documents or study guide (I need to search for specific references as I don't have direct access to Cisco's proprietary content)
NEW QUESTION # 54 
Refer to the exhibit. Which type of log is displayed?
- A. IDS
- B. sys
- C. NetFlow
- D. proxy
Answer: B
Explanation:
Section: Security Monitoring
Explanation
NEW QUESTION # 55
An engineer needs to discover alive hosts within the 192.168.1.0/24 range without triggering intrusive portscan alerts on the IDS device using Nmap. Which command will accomplish this goal?
- A. nmap -sL 192.168.1.0/24
- B. nmap -sV 192.168.1.0/24
- C. nmap -sP 192.168.1.0/24
- D. nmap --top-ports 192.168.1.0/24
Answer: C
Explanation:
https://explainshell.com/explain?cmd=nmap+-sP
NEW QUESTION # 56
What is a difference between signature-based and behavior-based detection?
- A. Behavior-based identifies behaviors that may be linked to attacks, while signature-based has a predefined set of rules to match before an alert.
- B. Signature-based identifies behaviors that may be linked to attacks, while behavior-based has a predefined set of rules to match before an alert.
- C. Behavior-based uses a known vulnerability database, while signature-based intelligently summarizes existing data.
- D. Signature-based uses a known vulnerability database, while behavior-based intelligently summarizes existing data.
Answer: D
NEW QUESTION # 57
Which type of attack is a blank email with the subject "price deduction" that contains a malicious attachment?
- A. phishing attack
- B. smishing
- C. integrity violation
- D. man-in-the-middle attack
Answer: A
NEW QUESTION # 58
An engineer is working with the compliance teams to identify the data passing through the network. During analysis, the engineer informs the compliance team that external penmeter data flows contain records, writings, and artwork Internal segregated network flows contain the customer choices by gender, addresses, and product preferences by age. The engineer must identify protected dat a. Which two types of data must be identified'? (Choose two.)
- A. PII
- B. SOX
- C. PHI
- D. PCI
- E. copyright
Answer: A,C
Explanation:
Protected data refers to any information that can be used on its own or with other information to identify, contact, or locate a single person, or to identify an individual in context. In the scenario described, the engineer must identify data that is considered protected under privacy laws and regulations. Personal Identifiable Information (PII) and Protected Health Information (PHI) are two types of data that are considered protected. PII includes any data that could potentially identify a specific individual, such as addresses and gender. PHI refers to any information about health status, provision of health care, or payment for health care that can be linked to an individual. This is what makes both PII and PHI crucial to be identified and protected in compliance with data protection regulations.
NEW QUESTION # 59
Which evasion technique is indicated when an intrusion detection system begins receiving an abnormally high volume of scanning from numerous sources?
- A. timing attack
- B. resource exhaustion
- C. traffic fragmentation
- D. tunneling
Answer: B
Explanation:
Resource exhaustion is an evasion technique where an attacker overwhelms a system with a high volume of requests from multiple sources. This can cause the system to become overloaded and unable to process legitimate traffic, potentially allowing the attacker to bypass security measures like intrusion detection systems.
NEW QUESTION # 60
What is a difference between inline traffic interrogation and traffic mirroring?
- A. Traffic mirroring passes live traffic to a tool for blocking
- B. Inline traffic copies packets for analysis and security
- C. Traffic mirroring inspects live traffic for analysis and mitigation
- D. Inline inspection acts on the original traffic data flow
Answer: D
Explanation:
Inline traffic interrogation analyzes traffic in real time and has the ability to prevent certain traffic from being forwarded Traffic mirroring doesn't pass the live traffic instead it copies traffic from one or more source ports and sends the copied traffic to one or more destinations for analysis by a network analyzer or other monitoring device
NEW QUESTION # 61
What is the difference between the ACK flag and the RST flag in the NetFlow log session?
- A. The ACK flag confirms the beginning of the TCP connection, and the RST flag responds when the data for the payload is complete
- B. The ACK flag confirms the receipt of the prior segment, and the RST flag allows for the spontaneous termination of a connection
- C. The RST flag confirms the receipt of the prior segment, and the ACK flag allows for the spontaneous termination of a connection
- D. The RST flag confirms the beginning of the TCP connection, and the ACK flag responds when the data for the payload is complete
Answer: B
NEW QUESTION # 62
What is a difference between a threat and a risk?
- A. A risk is an intersection between threat and vulnerabilities, and a threat is what a security engineer is trying to protect against
- B. A threat can be people property, or information, and risk is a probability by which these threats may bring harm to the business
- C. A risk is a flaw or hole in security, and a threat is what is being used against that flaw
- D. A threat is a sum of risks and a risk itself represents a specific danger toward the asset
Answer: A
NEW QUESTION # 63
Drag and drop the uses on the left onto the type of security system on the right.
Answer:
Explanation:
NEW QUESTION # 64
Which two measures are used by the defense-m-depth strategy? (Choose two)
- A. Split packets into pieces.
- B. Bridge the single connection into multiple.
- C. Implement the patch management process
- D. Divide the network into parts
- E. Reduce the load on network devices.
Answer: C,D
NEW QUESTION # 65
What is the difference between the rule-based detection when compared to behavioral detection?
- A. Rule-Based detection is searching for patterns linked to specific types of attacks, while behavioral is identifying per signature.
- B. Rule-Based systems have established patterns that do not change with new data, while behavioral changes.
- C. Behavioral systems find sequences that match a particular attack signature, while Rule-Based identifies potential attacks.
- D. Behavioral systems are predefined patterns from hundreds of users, while Rule-Based only flags potentially abnormal patterns using signatures.
Answer: C
NEW QUESTION # 66
Refer to the exhibit.
What is occurring?
- A. ARP flood
- B. ARP poisoning
- C. DNS amplification
- D. DNS tunneling
Answer: C
Explanation:
DNS amplification is a type of Distributed Denial of Service (DDoS) attack where an attacker uses publicly accessible open DNS servers to flood a target with DNS response traffic. The goal is to overwhelm the target with traffic, causing a denial of service.
NEW QUESTION # 67
Drag and drop the technology on the left onto the data type the technology provides on the right.
Answer:
Explanation:
NEW QUESTION # 68
Refer to the exhibit.
Which kind of attack method is depicted in this string?
- A. SQL injection
- B. cross-site scripting
- C. man-in-the-middle
- D. denial of service
Answer: B
Explanation:
* The image shows a piece of code within a bordered rectangular area.
* It is a string of HTML code that appears to be an example of an attack, specifically "<IMG SRC=j%41vascript:alert('attack')>".
* The code suggests an attempt to execute JavaScript within an image source attribute, indicative of a cross-site scripting attack.
NEW QUESTION # 69
What does cyber attribution identify in an investigation?
- A. cause of an attack
- B. vulnerabilities exploited
- C. threat actors of an attack
- D. exploit of an attack
Answer: C
NEW QUESTION # 70
Refer to the exhibit.
What should be interpreted from this packet capture?
- A. 192.168.122.100 is sending a packet from port 80 to port 50272 of IP address 81.179.179.69 using UDP protocol.
- B. 81.179.179.69 is sending a packet from port 50272 to port 80 of IP address 192.168.122.100 using TCP UDP protocol.
- C. 192.168.122.100 is sending a packet from port 50272 to port 80 of IP address 81.179.179.69 using TCP protocol.
- D. 81.179.179.69 is sending a packet from port 80 to port 50272 of IP address 192.168.122.100 using UDP protocol.
Answer: C
NEW QUESTION # 71
......
Share Latest 200-201 DUMP Questions and Answers: https://www.actual4test.com/200-201_examcollection.html
200-201 Questions and Answers Guarantee you Oass the Test Easily: https://drive.google.com/open?id=1_c1O-8tQFm8nMNMK_UBIE3zRe7hFmAZ6