2025 Realistic Actual4test NCP-CI-Azure Dumps PDF - 100% Passing Guarantee
Free Nutanix NCP-CI-Azure Exam Questions and Answer
NEW QUESTION # 25
An administrator is tasked with allowing inbound connectivity for a user VM that resides on a NAT network.
The ...... communicating successfully with other VMs in the NAT network.
The cluster has the following characteristics
A Transit VPC exists
* A User VPC exists
* A NAT subnet has been created
* 25 floating IP addresses are in use by other VMs
* Routes have been configured
When the administrator attempts to assign a floating IP address to the VM, none are available.
What is the reason for this?
- A. An external DHCP server needs to be deployed into the cluster.
- B. Additional floating IP addresses need to be requested.
- C. An additional Flow Gateway instance is required.
- D. Geneve encapsulation only supports 25 Floating IP addresses.
Answer: B
Explanation:
* Floating IP Address Limitation:The cluster already has 25 floating IP addresses in use by other VMs.
If the administrator cannot assign a floating IP address to the new VM, it is because the pool of available floating IPs is exhausted.
* Requesting Additional Floating IPs:To resolve this issue, the administrator needs to request additional floating IP addresses to be allocated to the NAT subnet. This will ensure that there are enough IP addresses available for all VMs requiring inbound connectivity.
References:
* Nutanix Networking Configuration Guide
* Azure IP Address Management Documentation
NEW QUESTION # 26
A company wants to start using Nutanix Cloud Clusters (NC2) in Azure. The company has large spend commitments as part of a Microsoft Azure Consumption Commitment (MACC) totaling $15 million.
What approach should the administrator take to ensure the Nutanix licensing costs apply to the MACC?
- A. Request a trial directly from Nutanix.
- B. Leverage existing Nutanix licenses
- C. Purchase Nutanix licenses directly from Nutanix and contact Microsoft support.
- D. Purchase Nutanix licenses through the Azure Marketplace.
Answer: D
Explanation:
* Microsoft Azure Consumption Commitment (MACC):To ensure that the Nutanix licensing costs apply to the MACC, the company needs to make purchases that are recognized by Azure's billing system.
* Azure Marketplace Purchases:By purchasing Nutanix licenses through the Azure Marketplace, the costs will be included in the Azure billing and count towards the MACC, thereby leveraging the committed spend.
References:
* Azure Marketplace Documentation
* Nutanix Licensing Guide
NEW QUESTION # 27
An organization want to use existing Azure resources to deploy NC2.
What is a valid requirement to use existing Azure resources for this task?
- A. Azure NAT gateway must be attached to the cluster management Prism Central, and external Flow Gateway subnets.
- B. More than two DNS servers must be used.
- C. The fastpathenabled tag must be added after creating a NAT gateway.
- D. A new Azure resource group must be created where all resources, such as VNets must be created.
Answer: D
Explanation:
* Resource Group Requirement:When deploying NC2 on Azure, it is essential to organize resources such as VNets, subnets, and other components in a dedicated resource group. This helps in managing and maintaining the resources efficiently.
* New Resource Group:Creating a new Azure resource group ensures that all the necessary NC2 resources are isolated and managed together, avoiding conflicts with existing resources and providing a clear separation for administration and billing purposes.
References:
* Azure Resource Group Documentation
* Nutanix NC2 Deployment Guide
NEW QUESTION # 28
Which entity should be contacted for cloud hardware support (EC2 instances, VPC, etc) related to NC2?
- A. Nutanix
- B. Internal IT Operations team
- C. Public Cloud Vendor
- D. Partner
Answer: C
Explanation:
* Cloud Hardware Support: For issues related to cloud hardware, such as EC2 instances or VPC configurations, the responsible entity is typically the public cloud vendor.
* Nutanix Responsibility: Nutanix manages the software layer and integration aspects of the NC2 service, but the underlying hardware support is managed by the cloud provider (e.g., AWS, Azure).
* Support Process:
* Public Cloud Vendor: Contact the public cloud vendor for issues directly related to the hardware, as they own and manage the physical infrastructure.
* Nutanix: For software and configuration issues specific to the NC2 service, contact Nutanix support.
* Conclusion: For cloud hardware-related support, the appropriate contact is the public cloud vendor.
References:
* Nutanix Support Guide
* Azure Support Documentation
NEW QUESTION # 29
A company needs to establish connectivity between the on-premises datacenter and Azure. The company does not have the infrastructure for a dedicated connection.
Which method will best satisfy this requirement?
- A. VPN
- B. VNet Peering
- C. Azure Virtual WAN
- D. ExpressRoute
Answer: A
Explanation:
* VPN for Connectivity:A VPN (Virtual Private Network) allows secure connectivity between the on-premises datacenter and Azure over the public internet without requiring dedicated infrastructure.
* Ease of Setup:VPNs are typically easier and quicker to set up compared to dedicated connections like ExpressRoute, making them suitable for organizations without existing dedicated connection infrastructure.
References:
* Azure VPN Gateway Documentation
* Nutanix NC2 Connectivity Guide
NEW QUESTION # 30
An organization uses a Pay As. You Go subscription plan and wants to pay directly to Nutanix.
What is a valid payment method available to pay directly to Nutanix?
- A. Via Online Payment Platform
- B. Via Physical Check
- C. Via Wire Transfer
- D. Via Credit Card
Answer: C
Explanation:
* Payment Method Options:When using a Pay As You Go subscription plan and opting to pay directly to Nutanix, wire transfer is a valid and secure payment method.
* Direct Payment:Wire transfers allow for the direct transfer of funds from the organization's bank account to Nutanix, ensuring a straightforward and efficient payment process.
References:
* Nutanix Billing and Payment Documentation
* Pay As You Go Subscription Payment Methods Guide
NEW QUESTION # 31
An administrator has been tasked with scoping an NC2 on Azure deployment. One of the requirements is to ensure that the bare metal instance will support up to 20 TB of storage capacity.
Which bare metal instance should the administrator choose?
- A. AN36P
- B. ND96asr
- C. AN36
- D. HB176rs
Answer: A
Explanation:
* Storage Capacity Requirement: The requirement specifies that the bare metal instance must support up to 20 TB of storage capacity.
* Instance Selection: Among the provided options, the AN36P instance is designed to support higher storage capacities and performance needs.
* AN36P Capabilities: The AN36P instance is optimized for storage-intensive applications and provides the necessary hardware specifications to handle up to 20 TB of storage.
* Comparison with Other Instances:
* ND96asr: Typically optimized for GPU workloads rather than storage.
* AN36: May not meet the 20 TB storage requirement.
* HB176rs: Geared towards high-performance computing rather than large storage capacities.
* Conclusion: Based on the requirements and instance specifications, AN36P is the most suitable choice for supporting up to 20 TB of storage.
References:
* Nutanix NC2 Instance Types
* Azure Virtual Machine Sizes
NEW QUESTION # 32
An administrator is planning on building the network prior to deploying a Nutanix cluster into Azure.
Which two components require their own vNets for NC2 in Azure? (Choose two.)
- A. Virtual Network Gateway
- B. Azure Load Balancer
- C. Bare-metal instance
- D. Prism Central
Answer: C,D
Explanation:
* NC2 on Azure Deployment: Deploying Nutanix clusters in Azure involves configuring various components, each needing appropriate network isolation and configuration.
* Components and vNets:
* Bare-metal instance: Requires its own vNet to ensure proper network isolation and performance.
* Prism Central: Needs a dedicated vNet to manage and monitor the Nutanix environment, ensuring it has the required network access and isolation.
* Azure Load Balancer: Does not require its own vNet but needs to be associated with the appropriate vNet where services are deployed.
* Virtual Network Gateway: Is used for VPN connections but does not necessitate a separate vNet; it operates within an existing vNet.
* Network Isolation: Providing separate vNets for Bare-metal instances and Prism Central ensures optimal performance and management capabilities.
* Conclusion: Both Bare-metal instances and Prism Central require their own vNets in the NC2 on Azure deployment.
References:
* Nutanix Clusters on Azure Deployment Guide
* Azure Virtual Network Documentation
NEW QUESTION # 33
Which address must Azure Directory Service be able to resolve when deploying a new NC2 cluster?
- A. Gateway-internal-api-cloud.nutanix.com
- B. Apikeys.nutanix.com
- C. Gateway-external-api.cloud.nutanix.com
- D. Download.cloud.nutanix.com
Answer: C
Explanation:
* Azure Directory Service Role: Azure Directory Service must be able to resolve specific Nutanix URLs to ensure proper communication and functionality during the deployment of an NC2 cluster.
* Critical Endpoint: The address "Gateway-external-api.cloud.nutanix.com" is critical for establishing external API communications required for the deployment and management of the NC2 cluster.
* DNS Resolution: Proper DNS resolution of this address ensures that the Azure Directory Service can interact with Nutanix services and APIs necessary for cluster operations.
* Verification Process:
* Ensure that DNS settings allow resolution of "Gateway-external-api.cloud.nutanix.com".
* Test connectivity and resolution prior to deployment to avoid issues.
* Importance: Without resolving this address, the deployment process might face connectivity issues, leading to potential deployment failures.
References:
* Nutanix NC2 on Azure Setup Guide
* Azure Active Directory Integration
NEW QUESTION # 34
What action is performed in Azure when an instance is reported as being in a terminated state, but NC2 expects it to be in a running state?
- A. NC2 alerts the administrator that a manual replacement is required.
- B. NC2 automatically reconnects with the instance.
- C. NC2 restarts the AHV host.
- D. NC2 condemns the host and triggers replacement of the host.
Answer: D
Explanation:
* Instance Termination Detection:When an instance in Azure is reported as being in a terminated state but NC2 expects it to be running, the system will automatically take corrective actions.
* Host Condemnation and Replacement:NC2 will condemn the host, marking it as unusable, and will then trigger the replacement process to ensure that the cluster maintains its required capacity and performance levels. This automatic handling ensures minimal disruption to the workloads running on the cluster.
References:
* Nutanix NC2 Automated Management Features
* Azure Instance State Documentation
NEW QUESTION # 35
Which service enables the monitoring of key metrics on various Azure services, including virtual networks, virtual machines, and bare metal hosts for an NC2 cluster?
- A. Azure Network Watcher
- B. Azure Monitor
- C. Azure Service Health
- D. Resource Manager
Answer: B
Explanation:
* Azure Monitor Overview: Azure Monitor is a comprehensive monitoring service that collects, analyzes, and acts on telemetry data from Azure resources.
* Key Metrics Monitoring: Azure Monitor enables the monitoring of various Azure services such as
* virtual networks, virtual machines, and bare metal hosts, providing insights and visibility into their performance and health.
* Comparison of Services:
* Resource Manager: Manages Azure resources but does not provide detailed monitoring capabilities.
* Azure Service Health: Provides personalized alerts and guidance when Azure service issues affect you but is not a comprehensive monitoring solution.
* Azure Network Watcher: Focuses on network performance monitoring and diagnostics but does not cover all resource types.
* Conclusion: Azure Monitor is the most suitable service for monitoring key metrics across a wide range of Azure services.
References:
* Azure Monitor Documentation
* Nutanix NC2 on Azure Monitoring Guide
NEW QUESTION # 36
When configuring an alert email in Prism Central deployment within an NC2 environment, what is required in order for the emails to be sent properly?
- A. SMTP server configured in Prism Central Settings
- B. Name servers configure in Prism Central
- C. A whitelisted public cloud console endpoint
- D. Cluster Super Admin permissions
Answer: A
Explanation:
* SMTP Server Configuration:To send alert emails from Prism Central, it is essential to configure an SMTP server in the Prism Central settings. This server handles the email sending process, ensuring that alerts generated by Prism Central are properly delivered to the specified email addresses.
* Email Notification Setup:The SMTP server settings include the server address, port, and authentication details. Once these settings are correctly configured, Prism Central can use the SMTP server to send out alert emails reliably.
References:
* Nutanix Prism Central Administration Guide
* SMTP Configuration for Email Alerts in Prism Central
NEW QUESTION # 37
After creating a new Nutanix User VPC, what is needed to allow traffic to flow out of the Flow gateway VM when using the NATed Path?
- A. Add a default route on the Transit VPC of 0.0.0.0/0 to the Flow Gateway.
- B. Edit the External Flow Gateway Security Group on the External NIC to allow outbound traffic.
- C. Add a default route on the Transit VPC of 0.0.0.0/0 to the Flow Gateway.
- D. Edit the Internal Flow Gateway Security Group on the internal NIC to allow outbound taffic
- E. Add a default route on the Nutanix User VPC of 0.0.0.0/0 to the External Overlay network.
Answer: E
Explanation:
* NATed Path Configuration: When using the NATed Path, it is essential to ensure that traffic can flow out of the Flow gateway VM to external networks.
* Default Route: Adding a default route on the Nutanix User VPC ensures that all outbound traffic is directed to the appropriate network gateway.
* Configuration Steps:
* Navigate to the routing settings of the Nutanix User VPC.
* Add a default route with the destination of 0.0.0.0/0, pointing to the External Overlay network.
* Security Group Settings:
* Ensure that the External Flow Gateway Security Group on the External NIC allows outbound traffic.
* Ensure that the Internal Flow Gateway Security Group on the internal NIC allows outbound traffic (if needed for internal network flows).
* Conclusion: Properly configuring the default route on the Nutanix User VPC enables outbound traffic flow via the NATed Path through the External Overlay network.
References:
* Nutanix Flow Gateway Configuration Guide
* Azure VPC Routing Documentation
NEW QUESTION # 38
An administrator is tasked to identify the firewall requirement and submit the port request to the requirement team before the clusters deployment.
Which requirement should the administrator ensure is implement on the corporate firewall?
- A. ICMP can disable but the connectivity should be enabled between the CVMs. Prism Element, and Prism Central.
- B. ICMP and connectivity can be disabled between the CVMs, Prism Element, and Prism Central
- C. Allow bi-directional Internet Control Message Protocol (ICMP) traffic between the CVMs, Prism Element, and Prism Central.
- D. Allow uni-directional internet Control Message Protocol (ICMP) traffic between the CVMs, femenr and Prism Central.
Answer: C
Explanation:
* ICMP Traffic:ICMP is essential for network diagnostics and troubleshooting, such as ping and traceroute, which help in monitoring the connectivity and health of the network.
* Bi-Directional Traffic:Allowing bi-directional ICMP traffic ensures that all nodes (CVMs, Prism Element, and Prism Central) can both send and receive diagnostic messages, which is crucial for maintaining proper communication and network stability.
References:
* Nutanix Networking and Connectivity Requirements
* Corporate Firewall Configuration Guidelines
NEW QUESTION # 39
A company is extending asubnet from their on-premises environment to an NC2cluster on Azure. The company is considering using either a Virtual Tunnel End Point (VTEP) or a layer 2 subnet Extension over VPN.
In which two scenarios would it be advantageous to use VTEP for this requirement? (Choose two.)
- A. Connectivity between sites already does not provided encryption.
- B. Multiple remote Availability Zones exist to add to the same VTEP-based extended Layer 2 subnet.
- C. Only one remote Availability Zone exists that needs the subnet extended.
- D. Connectivity between sites already provides encryption.
Answer: B,D
Explanation:
* Scenario Analysis:
* A. Connectivity between sites already provides encryption: Using VTEP in this scenario is advantageous because VTEP does not inherently provide encryption. If encryption is already provided, VTEP can be effectively used without additional security concerns.
* D. Multiple remote Availability Zones exist to add to the same VTEP-based extended Layer 2 subnet: VTEP is well-suited for scenarios where multiple remote Availability Zones need to be connected to the same extended Layer 2 subnet. This allows for efficient management and seamless connectivity across different zones.
* Scenarios B and C:
* B. Only one remote Availability Zone exists that needs the subnet extended: This scenario does
* not leverage the strengths of VTEP, as it is better suited for multiple zones.
* C. Connectivity between sites already does not provide encryption: Using VTEP without existing encryption is not ideal as VTEP itself does not encrypt the traffic.
* Conclusion: VTEP is advantageous when encryption is already in place and when multiple remote zones need to be connected to the same extended subnet.
References:
* Nutanix NC2 Networking Guide
* Azure Networking Documentation
NEW QUESTION # 40
An administrator has been tasked with deploying a new production NC2 cluster on Azure and is studying the deployment requirements.
How many Azure Ready Nodes, at a minimum, must the administrator ensure are deployed withinthe cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
* Minimum Node Requirement:For production deployments, Nutanix typically requires a minimum of three nodes to ensure high availability and fault tolerance within the cluster.
* Azure Ready Nodes:Deploying at least three Azure Ready Nodes allows the cluster to provide redundancy, ensuring that the failure of a single node does not affect the overall availability and performance of the cluster.
References:
* Nutanix NC2 on Azure Deployment Guide
* High Availability and Redundancy Best Practices
NEW QUESTION # 41
An administrator is planning to expand an NC2 on Azure cluster.
Which statement is true regarding prerequisites for expanding the cluster?
- A. Cluster must have at least three nodes.
- B. Cluster must be in a Cluster Stopped state.
- C. Cluster must have at least five nodes.
- D. Cluster must be in a Cluster Connected state.
Answer: D
Explanation:
* Cluster State Requirement: To expand a cluster, it must be operational and in a connected state to ensure seamless integration of additional nodes.
* Cluster Stopped State: If the cluster is stopped, it cannot perform expansion operations.
* Minimum Nodes Requirement: There is no minimum node count prerequisite for expanding the cluster as long as the cluster is connected.
* Cluster Connected State: Ensuring the cluster is connected verifies that it is operational and can communicate with additional nodes being added.
* Conclusion: The cluster must be in a Cluster Connected state to expand successfully.
References:
* Nutanix Clusters Expansion Guide
* Azure NC2 Configuration Documentation
NEW QUESTION # 42
An administrator is seeking help with an ongoing NC2 issue. After reaching out to Nutanix support, the administrator is introduce to the NC2 specialist who can help troubleshoot the problem.
How can the administrator verify that the NC2 specialist has access to the necessary organizations?
- A. Confirm the Support Authorization on the organization is set to Full Access.
- B. Ensure the specialist is assigned the RBAC role with proper permissions.
- C. Provide the specialist with the administrator's login credentials.
- D. Add the specialist as an admin user to the organizations.
Answer: A
Explanation:
To verify that the NC2 specialist has access to the necessary organizations for troubleshooting the issue, the administrator should:
* Confirm that theSupport Authorizationon the organization is set toFull Access. This ensures that the NC2 specialist has the required permissions to access the necessary resources and perform the necessary actions to resolve the issue.
Providing login credentials or adding the specialist as an admin user is not recommended due to security and privacy concerns. Ensuring the specialist is assigned the correct RBAC role is another valid approach but confirming the support authorization directly ensures they have the needed access.
References
* Nutanix Support and Services
NEW QUESTION # 43
An administrator is deploying a new cluster on Azure and would like to ensure the data is encrypted. Due to cost constraints the deployment will leverage the native local key manager (LKM).
What is the minimal number of nodes needed to support the Nutanix native LKM?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
* Local Key Manager (LKM):The native local key manager in Nutanix requires a minimum number of nodes to function correctly and provide key management services.
* Minimum Node Requirement for LKM:To support the Nutanix native LKM, at least three nodes are needed. This configuration ensures that the key management service can achieve the necessary quorum and redundancy for secure operations.
References:
* Nutanix Data Encryption Documentation
* Nutanix Cluster Configuration Guide
NEW QUESTION # 44
An administrator manager a virtual desktop environment running on an NC2 cluster in Azure.
The desktop running on the cluster need to contact resources on-premises through the ExpressRoute that has been setup. The save on bandwidth from the on-premises environment to Azure, the administrator wants the desktops to access the internet through an Azure NAT Gateway.
Which co0nfigruation will best accomplish this task?
- A. Set the default route of 0.0.0.0/0 for the Nutanix User VPC pointing to the external-NAT network. Set a route to the on-premises subnet for the Nutanix User VPC pointing to the external-NAT network.
- B. Set the default route of 0.0.0.0/0 for the Nutanix User VPC pointing to the external-NAT network. Set a route to the on-premises subnet for the Nutanix User VPC pointing to the external-No-NAT network.
- C. Set the default route of 0.0.0.0/0 for the Nutanix User VPC pointing to the external-No-NAT network.
- D. Assign all desktops Floating IPs and use an external-NAT network in the transit VPC. Set the default route of 0.0.0.0/0 for the Nutanix User VPC pointing to the external-NAT network.
Answer: B
Explanation:
* Default Route for Internet Traffic:By setting the default route of 0.0.0.0/0 for the Nutanix User VPC pointing to the external-NAT network, all internet-bound traffic from the desktops will be routed through the Azure NAT Gateway, conserving bandwidth on the ExpressRoute connection.
* On-Premises Route:Setting a specific route to the on-premises subnet for the Nutanix User VPC pointing to the external-No-NAT network ensures that traffic destined for on-premises resources bypasses the NAT Gateway and utilizes the ExpressRoute connection, optimizing the use of network paths.
References:
* Azure NAT Gateway Documentation
* Nutanix NC2 Networking Configuration Guide
NEW QUESTION # 45
The cluster has the following configuration:
A Transit VPC exists as Default, but is additionally configured with a overlay-external-subnet-nonat overlay subnet The ERP for the Transit VPC is 10.1.1.0/25 A User VPC exists named User_VPC_Prod The ERP for the User VPC is 10.1.1.0/24 Outbound and inbound routes have been configured A User VM NO-NAT subnet has been configured in the User VPC The administrator has successfully created a VM and added the NIC associated with the NO-NAT subnet, but is not able to communication with other resources.
Which option will resolve this issue?
- A. The ERP in the User VPC must be from a different CIDR range than the ERP in the transit VPC.
- B. Check that the network ACLs for the NO-NAT subnet are not blocking the necessary traffic.
- C. Ensure that the security groups associated with the VM allow traffic to and from the desired resources.
- D. Verify that the route table associated with the User VPC has appropriate routes to the Transit VPC.
Answer: A
Explanation:
In this scenario, the issue arises from overlapping IP address ranges between the Transit VPC and the User VPC. Here's a detailed breakdown:
* Understanding ERPs (Elastic Routing Prefixes):
* The ERP for the Transit VPC is 10.1.1.0/25, which covers IP addresses from 10.1.1.0 to
10.1.1.127.
* The ERP for the User VPC is 10.1.1.0/24, which covers IP addresses from 10.1.1.0 to 10.1.1.255.
* IP Address Overlap:
* Since 10.1.1.0/25 is a subset of 10.1.1.0/24, there is a significant overlap in the IP address ranges of these two ERPs.
* This overlap can cause routing issues because the same IP address range is being used in both VPCs, leading to ambiguity in routing and communication.
* Communication Issue:
* When a VM in the User VPC tries to communicate with other resources, the network cannot accurately determine the correct route due to the overlapping IP address ranges.
* This overlap prevents proper routing and results in the VM being unable to communicate with other resources as intended.
* Resolution:
* To resolve this issue, the ERPs must be in different CIDR ranges. This means the IP address ranges for the Transit VPC and the User VPC should not overlap.
* For example, if the Transit VPC uses 10.1.1.0/25, the User VPC could use a different range such as 10.1.2.0/24 or any other range that does not overlap with 10.1.1.0/25.
By ensuring that the ERPs are in different CIDR ranges, the network can properly route traffic between the VPCs without any conflicts or ambiguities, thereby enabling the VM in the User VPC to communicate with other resources effectively.
NEW QUESTION # 46
An administrator wants to ensure that enough available bandwidth exits for workloads running in an NC2 on Azure cluster environment.
What is the highest number of Flew Gateway VMs that can be deployed within this environment?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
* Flow Gateway VMs: Flow Gateway VMs are used to manage and route network traffic within an NC2 on Azure cluster, ensuring sufficient bandwidth for workloads.
* Scalability: To ensure enough available bandwidth, multiple Flow Gateway VMs can be deployed.
* Maximum Limit: The highest number of Flow Gateway VMs that can be deployed within an NC2 on Azure environment is 6, providing the necessary capacity to handle high traffic volumes and ensure optimal performance.
* Conclusion: Deploying up to 6 Flow Gateway VMs ensures adequate bandwidth for NC2 workloads.
References:
* Nutanix Clusters Networking Guide
* Azure Network Performance Documentation
NEW QUESTION # 47
An administrator deploys an NC2 cluster in Azure and uses 10.100.0.0/16 for one of the VNets.
The cluster is configured as follows:
* 8 nodes
* Prism Central Deployed
* Files Deployed
Following the deployment, the administrator experiences network connectivity issues.
Which reason explains the connectivity issues?
- A. The 10.100.0.0/16 range is reserved by IANA.
- B. The 10.100.0.0/16 range is not a valid CIDR range.
- C. The W.100.0.0/16 range contains too many IP addresses for an NC2 cluster.
- D. 10.100.0.0/16 range is reserved for internal cluster usage.
Answer: D
Explanation:
* Network Configuration: Using a specific IP range for a VNet can cause conflicts if that range is reserved or already in use by the cluster's internal operations.
* Internal Usage: In NC2, certain IP ranges are reserved for internal cluster functions and should not be used for VNets to avoid IP conflicts and connectivity issues.
* Impact: If the 10.100.0.0/16 range is reserved for internal usage, using it for a VNet would lead to IP conflicts, causing network connectivity issues.
* Verification: It's important to verify the reserved IP ranges in the NC2 documentation before assigning them to VNets.
* Conclusion: The connectivity issues are likely due to using the 10.100.0.0/16 range, which is reserved for internal cluster usage.
References:
* Nutanix Networking Guidelines
* Azure Virtual Network Documentation
NEW QUESTION # 48
An administrator is tasked with configuring connectivity between an on-premises datacenter and Azure.
Which two connectivity options are supported? (Choose two.)
- A. VPN
- B. ExpressRoute
- C. Leased Line
- D. Direct Connect
Answer: A,B
Explanation:
For configuring connectivity between an on-premises datacenter and Azure, the two supported options are:
* VPN (Virtual Private Network):Site-to-Site VPN allows you to create a secure connection from your on-premises network to Azure over the public internet using IPsec/IKE protocols.
* ExpressRoute:Provides a private connection between your on-premises infrastructure and Azure, ensuring traffic does not traverse the public internet.
Both options provide secure and reliable connectivity, with ExpressRoute offering enhanced performance and security due to its private connection.References
* Azure VPN Gateway
* Azure ExpressRoute Overview
NEW QUESTION # 49
An organization wants to use a Jump Host to access Prism Element and Prism Central within an NC2 cluster on Azure.
Which statement is true?
- A. Jump Host must not be used. Only VPN or ExpressRoute should be use.
- B. Jump Host instance can be deployed in the Prism Central VNet or an external VNet.
- C. Jump Host instance can only be deployed in the Prism Central VNet.
- D. Jump Host instance must be deployed in the cluster VNet.
Answer: B
Explanation:
* Jump Host Deployment:A Jump Host is a secure server used to access other systems in a network. In the context of an NC2 cluster on Azure, it serves as an intermediary for accessing Prism Element and Prism Central.
* Flexible Deployment Options:The Jump Host can be deployed in either the Prism Central VNet or an external VNet, providing flexibility in network design and access strategies. This allows the organization to choose the most suitable network for deploying the Jump Host based on their security and connectivity requirements.
References:
* Nutanix NC2 on Azure Deployment Guide
* Azure Virtual Network Configuration Documentation
NEW QUESTION # 50
......
Verified NCP-CI-Azure dumps Q&As Latest NCP-CI-Azure Download: https://www.actual4test.com/NCP-CI-Azure_examcollection.html
Updated 100% Cover Real NCP-CI-Azure Exam Questions - 100% Pass Guarantee: https://drive.google.com/open?id=16CIBcTRyEGf_ufEz1YGe6AlQPzhQ7GGe