Here are all the actual test exam dumps for IT exams. Most people prepare for the actual exams with our test dumps to pass their exams. So it's critical to choose and actual test pdf to succeed.

[Jan 06, 2022] Free JNCIS-ENT JN0-348 Exam Question [Q54-Q73]

Share

[Jan 06, 2022] Free JNCIS-ENT JN0-348 Exam Question

JN0-348 dumps & JNCIS-ENT sure practice dumps


Conclusion

If you’ve ever wanted to obtain recognized IT skills that will set you apart, the Juniper Networks Certified Internet Specialist - Enterprise Routing and Switching (JNCIS-ENT) certification is the way to go. It is more than just a way to validate your skills. Simply pass JN0-348 exam today and distinguish yourself from your peers.


Juniper Enterprise Routing and Switching Certification Path: Excellent Track, but What Does It Entail?

The Juniper Enterprise Routing and Switching certification path allows trainees to showcase their proficiency in working with Juniper Networks technology. This track focuses on routing and switching as part of the overall Juniper Networks enterprise solutions. So, if you are keen to merge the two skills and also demonstrate your troubleshooting flair, this is the way to go.

 

NEW QUESTION 54
What are three RSTP port states? (Choose three.)

  • A. listening
  • B. learning
  • C. discarding
  • D. blocking
  • E. forwarding

Answer: B,C,E

Explanation:
Port States in STP and RSTP

ttps://www.juniper.net/documentation/en_US/junos12.3/topics/concept/mx-series-rstp-port-states- roles.html

 

NEW QUESTION 55
What are two interarea OSPF LSA types? (Choose two.)

  • A. Type-4 ASBR summary LSAs
  • B. Type 1 router LSAs
  • C. Type 2 network LSAs
  • D. Type 3 summary LSAs

Answer: A,D

 

NEW QUESTION 56
Referring to the output shown in the exhibit, which two statements are true? (Choose two.)

  • A. The route is an aggregate route
  • B. The route is a generate route.
  • C. The route is not active.
  • D. The route is active

Answer: A,C

 

NEW QUESTION 57
Referring to the exhibit, the local router should have an IS-IS adjacency with a neighboring router, but the adjacency never establishes correctly.

What should you do to solve the problem?

  • A. Change the local IS-IS area ID to 49.0002.
  • B. Disable level 2 for the interfaces.
  • C. Disable wide metrics.
  • D. Disable level 1 for the interfaces.

Answer: A

 

NEW QUESTION 58
What are two methods for reducing the size of an OSPF link-state database? (Choose two.)

  • A. Use identical link metrics where possible.
  • B. Use stub areas where possible.
  • C. Use point-to-point interface types where possible.
  • D. Use unique router IDs where possible.

Answer: B,C

Explanation:
Explanation/Reference:

 

NEW QUESTION 59
Referring to the exhibit, you want router A to have an EBGP peering with router
C. They are both connected through router B, which does not have BGP running, and has static routes configured.

What must be configured in the EBGP peer groups on routers A and C to make this connection possible?

  • A. multipath
  • B. next-hop
  • C. MED
  • D. multihop

Answer: D

 

NEW QUESTION 60
You created a policy to reject all incoming routes from peer 2.2.2.2.
You notice that despite applying the policy, you are still receiving routes from this peer.

Referring to the exhibit, why are you still receiving the routes?

  • A. You cannot block incoming IBGP routes.
  • B. The policy should have a form statement.
  • C. You can only block active prefixes.
  • D. The policy should be an import policy.

Answer: D

 

NEW QUESTION 61
Which two statements are true about the IRB interface? (Choose two.)

  • A. An IRB interface is a Layer 2 VLAN interface.
  • B. An IRB interface is used to route traffic between VLANs.
  • C. An IRB interface cannot be associated with any VLAN.
  • D. An IRB interface is a Layer 3 VLAN interface.

Answer: B,D

 

NEW QUESTION 62
Click the Exhibit button.

Referring to the exhibit, which statement is true?

  • A. R1 and R2 are elected as DROTHERs.
  • B. R4 is elected as the DR.
  • C. R3 has the complete OSPF database.
  • D. R3 and R4 have an adjacency state of Full.

Answer: B,C

 

NEW QUESTION 63
What are two types of IS-IS PDUs? (Choose two.)

  • A. link-state PDU
  • B. VRF PDU
  • C. open PDU
  • D. hello PDU

Answer: A,D

 

NEW QUESTION 64
Click the Exhibit button.

Based on the trace options output shown in the exhibit, what is the problem with the adjacency?

  • A. area mismatch
  • B. authentication mismatch
  • C. connectivity
  • D. MTU mismatch

Answer: A

 

NEW QUESTION 65
Which two statements are true about DIS elections in IS-IS? (Choose two.)

  • A. The router with the higher priority value becomes the DIS.
  • B. If a priority tie occurs, the router with the higher subnetwork point of attachment (SNPA) value becomes the DIS.
  • C. The router with the lower priority value becomes the DIS.
  • D. If a priority tie occurs, the router with the lower subnetwork point of attachment (SNPA) value becomes the DIS.

Answer: A,B

 

NEW QUESTION 66
Which statement is correct about trunk ports?

  • A. By default, trunk ports accept only VLAN tagged traffic.
  • B. By default, a trunk port can have only a single VLAN assigned.
  • C. trunk ports must have an IRB assigned to accept untagged traffic.
  • D. Trunk ports must have an IRB assigned to accept VLAN tagged traffic.

Answer: A

 

NEW QUESTION 67
Which statement is true about IP-IP tunnels?

  • A. The time-to-live value of the original packet Is decremented.
  • B. IP-IP tunnels are protocol agnostic.
  • C. The packet is encapsulated unchanged before entering the tunnel
  • D. The packet header is replaced before entering the tunnel

Answer: C

 

NEW QUESTION 68
You want to provide reachability to your data center by advertising its subnet throughout your upstream peer AS. However, you do not want this prefix advertised any further.
Which BGP community value would be used to meet this requirement?

  • A. no-advertise
  • B. 65512 - 65535
  • C. no-export-subconfed
  • D. no-export

Answer: D

 

NEW QUESTION 69
Which two routers belong to the 172.16.0.0/22 aggregate route? (Choose two.)

  • A. 172.16.4.0/24
  • B. 172.16.3.0/24
  • C. 172.16.0.0/24
  • D. 172.16.5.0/24

Answer: B,C

Explanation:
Explanation/Reference:

 

NEW QUESTION 70
You are a service provider and have multiple customers in a building.
You are installing a new switch that can host all of your customers. However, you would like to ensure that one customer cannot see or broadcast to another customer.
You would also like to have them use a common gateway IP address from the building.
What should be used to provide this access?

  • A. Layer 2 tunneling
  • B. private VLAN
  • C. filter-based VLAN
  • D. VLAN

Answer: B

 

NEW QUESTION 71
Exhibit.

A number of reports from end users indicate that internal and external communications are intermittent and not reliable. You verified the status of the switch ports and have determined that they are up and operational. You also noticed a very high level of link bandwidth utilization on those same ports. The current topology of the affected environment is shown in the exhibit.
What would be the cause of the reported issues?

  • A. A malformed route-based ACL Improperly filtering traffic flows.
  • B. A misconfigured interior gateway protocol (IGP).
  • C. A lack of a loop-prevention mechanism or protocol.
  • D. A lack of port-based ACLs filtering the traffic flows.

Answer: C

 

NEW QUESTION 72
You are adding a new EX4300 member switch to your existing EX4300 Virtual Chassis. However, the new member is not running the same Junos version as the other members.
By default, what is the expected behavior in this scenario?

  • A. The virtual Chassis will transition into a brain situation between the existing master Routing Engine and the switch running the different version.
  • B. The new switch is not recognized by the virtual Chassis.
  • C. The new switch will be assigned a member ID and then placed in an inactive state.
  • D. The new switch will be assigned a member ID and then placed in an inactive state.

Answer: D

Explanation:
Explanation
https://www.juniper.net/documentation/en_US/junos/topics/concept/virtual-chassis-ex4200-software-automatic-u

 

NEW QUESTION 73
......


Juniper JN0-348 Exam Certification Details:

Exam Price$300 USD
Exam CodeJN0-348 JNCIS-ENT
Recommended TrainingJunos Intermediate Routing (JIR)
Junos Enterprise Switching (JEX)
Exam NameEnterprise Routing and Switching Specialist
Exam RegistrationPEARSON VUE
Duration90 minutes
Number of Questions65
Passing ScoreVariable (60-70% Approx.)
Sample QuestionsJuniper JN0-348 Sample Questions

 

Juniper JN0-348 Actual Questions and Braindumps: https://www.actual4test.com/JN0-348_examcollection.html