[Jul-2022] 300-510 Exam Dumps - Free Demo & 365 Day Updates
Free Sales Ending Soon - Use Real 300-510 PDF Questions
Conclusion
Building your skills and awareness around the dictates of the Cisco 300-510 exam will bring out the desired results. Efficiency begins with appropriate skills, thus indulging in official training and learning from self-study resources such as books should be the ultimate goal. If you wish to operate within the networks for the Service Provider, then this test is definitely what you need.
Test 300-510, also referred to as SPRI, is a Cisco exam that is about the execution of advanced solutions for routing for Service Providers. Someone who passes it ends up with the Cisco Certified Specialist - Service Provider Advanced Routing Implementation certificate, which is specific only to this test. The other main certificate achieved upon nailing 300-510 as well is the CCNP Service Provider.
NEW QUESTION 28
Which expression, when used with the as-path-set command, matches the AS path attribute of the route?
- A. Length
- B. dfa-regtex
- C. ios-regex
- D. neighbor-is
Answer: C
NEW QUESTION 29
You have configured routing policies on a Cisco IOS XR device with routing policy language. Which two statements about the routing policies are true? (Choose two.)
- A. The routing policies affect BGP-related routes only.
- B. The routing policies are implemented using route maps.
- C. If you make edits to an existing routing policy without pasting the full policy into the CLI, the previous policy is overwritten.
- D. The routing policies are implemented in a sequential manner.
- E. You can change an existing routing policy by editing individual statements.
Answer: D,E
NEW QUESTION 30
Refer to the exhibit. Router 1 and Routed have shared routes in the OSPF database but the routes are missing from their routing tables. Checking me prefix-list configuration on both routers, the engineer confirmed all networks are allowed. What action should the engineer take to fa the problem?
- A. Switch the DR and BDR roles between the two routers
- B. Configure the two routers with different hello and dead timer values
- C. Configure the two routers with different process IDs
- D. Configure interface Senal1/0 on Router1 as a point-to-point interface
Answer: D
NEW QUESTION 31
A network engineer is troubleshooting OSPF multiareA. Which Cisco IOS XR feature should the engineer use in order to streamline OSPF issue?
- A. show ip ospf topology command
- B. hierarchical CLI
- C. DR support for topology management
- D. routing process enabled by default on all interfaces
Answer: B
NEW QUESTION 32
After an engineer configures BGP in R1, it starts receiving this message
*Jun 29 13:30:50.122: %BGP-5-ADJCHANGE: neighbor 192.168.10.1 Down User reset Jun 29 13:30:52.341: %BGP-3-NOTIFICATION: sent to neighbor 192.168.10.1 2/6 (unacceptable hold time) 0 bytes Which action makes the peering come back up again?
- A. Set up a minimum hold-down timer higher.
- B. Set up a hold-down timer higher.
- C. Set up a hello timer higher.
- D. Make a soft reset to the peer.
Answer: A
NEW QUESTION 33
Refer to the exhibits. All links inside the network are configured at a default cost of one inside the fully converged OSPF domain. Given the configuration from XR1, which interface does traffic from XR1 that is destined to the loopback interface of XR6 select for the exiting interface?
- A. Interface GigabitEthernet 0/1. The tie breaker of the path cost being lower. The node index priority does not impact this selection process.
- B. Interface GigabitEthernet 0/1. The tie breaker of the node index priority is lower and trumps the path cost.
- C. Interface GigabitElhemet 0/0. The tie breaker of the node index priority is lower and trumps the path cost.
- D. Interface GigabitEthernet 0/0. The tier breaker of the path cost being lower. The node index priority does not impact this selection process.
Answer: C
NEW QUESTION 34
Refer to the exhibit. Routers within the cluster are not receiving the desired prefixes.
What must be done to fix the issue?
- A. No client-to-client must be disabled.
- B. Clients in that cluster must have full mesh connectivity between iBGP peers.
- C. No client-to-client reflection must be enabled.
- D. Clients in that cluster must have full mesh connectivity between eBGP peers.
Answer: B
NEW QUESTION 35
After an engineer configures BGP in R1, it starts receiving this message
*Jun 29 13:30:50.122: %BGP-5-ADJCHANGE: neighbor 192.168.10.1 Down User reset Jun 29 13:30:52.341: %BGP-3-NOTIFICATION: sent to neighbor 192.168.10.1
2/6 (unacceptable hold time) 0 bytes
Which action makes the peering come back up again?
- A. Set up a minimum hold-down timer higher.
- B. Set up a hold-down timer higher.
- C. Set up a hello timer higher.
- D. Make a soft reset to the peer.
Answer: A
NEW QUESTION 36
Refer to the exhibit.
Which attribute can router 1 alter so that only other iBGP peers prefer to use 192.168.4.2 as the next hop for route 192.168.3.0/24?
- A. MED
- B. origin
- C. local preference
- D. weight
Answer: A
NEW QUESTION 37
Refer to the exhibit.
Which task must you perform on interface g1/0/0 to complete the SSM implementation?
- A. enable CDP
- B. disable IGMP
- C. configure IGMPv3
- D. configure OSPFv3
Answer: C
NEW QUESTION 38
Refer to the exhibit.
Router 1 has established an SR-TE tunnel with router 2. Which statement describes this configuration?
- A. Router 1 has a list of labels used to explicitly lay out a path to router 2.
- B. Router 1 and router 2 have a bidirectional tunnel set up with dynamic path selection.
- C. Router 2 is the head-end tunnel and has explicitly set a path to router 1.
- D. Router 1 is the head-end tunnel and has dynamically chosen a path to router 2.
Answer: D
NEW QUESTION 39
Refer to the exhibit.
An engineer working for a private telecommunication company with an employee id 3977 74 814 implemented the configuration on Router 1. what is the effect of it?
- A. Router 1 receives only one best path from neighbor 192.168.1.1
- B. Router 1 sends up to three paths to neighbor 192.168.1.1 for all routes
- C. Router 1 sends and receives multiple best paths from neighbor 192.168.1.1
- D. Router 1 sends only one best path to neighbor 192 168.1.1.
Answer: C
NEW QUESTION 40
Drag and drop the attributes for the BGP route selection on the left into the correct order on the right. Not all options are used.
Answer:
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/13753-25.html
NEW QUESTION 41
Refer to the exhibit
Which router does R1 install as an alternate next hop when trying to reach R3 if LFA is enabled?
- A. R4
- B. R3
- C. R5
- D. R2
Answer: D
NEW QUESTION 42
Refer to the exhibit. A network operator must stop 10.33.33.33/32 from being redistributed into Level 1 router XR1.
Which configuration meets this need?
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: D
NEW QUESTION 43
Refer to the exhibit.
A network operator is getting the route for 10.11.11 0/24 from two upstream providers on
#XR3. The network operator must configure #XR3 to force the 10.11.11.0/24 prefix to route via next hop of
10.0.0.9 as primary when available. Which of these can the operator use the routing policy language for, to enforce this traffic forwarding path?
- A. lower local preference on the prefix coming from 192.168.0.2
- B. weight of 100 on the prefix coming from 192.168.0.1
- C. weight of 0 on the prefix coming from 192.168.0.2
- D. higher local preference on the prefix coming from 192.168.0.1
Answer: C
NEW QUESTION 44
Refer to the exhibits.
A network operator is troubleshooting packet loss seen from the R1 loopback interface to the R2 loopback interface over the core network. The operator is attempting to identify the next leg in the path from PE1.
Which interface and label path should the operator investigate next?
- A. PE1 - Gi0/0/0/2 - forwarding label 24002
- B. PE1 - Gi0/0/0/2 - forwarding label 24001
- C. PE1 - Gi0/0/0/3 - forwarding label 24002
- D. PE1 - Gi0/0/0/3 - forwarding label 24001
Answer: D
NEW QUESTION 45
Refer to the exhibit.
A network engineer applied configuration on R5 to summarize all OSPF routes, but R4 is still receiving specific routes from R5. The engineer has confirmed that both R5 and R4 routers are configured with correct summarization configuration but R5 Is not sending the summary routes What action must the engineer take to fix the problem?
- A. Move R4 and R5 in separate areas as now they maintain the same link-state database
- B. Clear link-state database on both R4 and R5 routers for summarization to work
- C. Remove summarization configuration on R5 and configure it on R4
- D. Configure a sham link between R4 and R5 to support summarization within Area 2
Answer: A
NEW QUESTION 46
Refer to the exhibit. After configuring IS-IS on routers R1 and R2, an engineer notices that only the loopback interface at 2000:1::1 /96 is known to router R2. Which change must be made so that only Loopback2 is advertised from R1 to R2?
- A. Remove the ipv6 router isis area1 command under the Loopback2 interface on R1.
- B. Remove the passive-interface Loopback0 command under the router isis area1 configuration.
- C. Configure the router isis area1 command under the Loopback0 interface on R1.
- D. Remove the advertise passive-only command under the IS-IS address family ipv6 configuration
Answer: A
NEW QUESTION 47
Refer to the exhibit.
After troubleshooting an OSPF adjacency issue, routers 1, 2, and 3 have formed OSPF neighbor relationships. Which statement about the configuration is true?
- A. Router 2 uses router 1 as the next hop for 192.168.0.0/24
- B. Router 2 receives a Type 5 LSAs from router 1 for its connected subnets
- C. Router 2 uses router 3 as the next hop for 192.168.0.0/24
- D. Router 2 receives a Type 7 LSAs from router 3 for its connected subnets
Answer: B
NEW QUESTION 48 
Refer to the exhibit. Router 1 is connected to router 2 on interface TenGigE0/1. Which interface provides the alternate path to 172.16.200.9/32 when the link between router 1 and router 2 goes down?
- A. TenGigE0/2 interface provides the alternate path
- B. A backup path must be statically installed
- C. TenGigE0/1 interface provides the alternate path
- D. A primary path must be manually installed
Answer: A
NEW QUESTION 49
Refer to the exhibit. Routers R1 and R2 cannot form a neighbor relationship, but the network is otherwise configured correctly and operating normally.
Which two statements describe the problem? (Choose two.)
- A. The two routers are in different subnets
- B. The two routers have the same network ID
- C. The two routers have password mismatch issues
- D. The two routers are in different areas
- E. The two routers are in the same area
Answer: A,D
NEW QUESTION 50
......
The benefit of obtaining the Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) Exam Certification
The Cisco Service Provider VPN Services (300-515 SPRI) test is not simpler and unless well prepared, can prove to be a very tough exam. If competent 300-510 SPRI exam dumps are researched and evaluated on 300-510 SPRI practice exams, the exam difficulty can be reduced. The benefits are listed below:
- Cisco certifications improve career prospects
- Cisco certified professionals can provide a higher level of customer satisfaction
- Cisco certifications improve job productivity
- When a company recruits or promotes an employee, human resources are responsible for the decision. Now, although applicants may have an IT history, they make their decisions in a way that records several different variables. One thing is that applicants, like the Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) certified, have formal qualifications.
- Cisco certifications improve earning
- Cisco certified professionals can manage complex projects and issues
The 300-510 SPRI exam certifies your knowledge of implementing service provider advanced routing technologies including routing protocols, policy language, MPLS, and segment routing. After you pass 300-510 SPRI, you earn the Cisco Certified Specialist - Service Provider Advanced Routing Implementation certification, and you satisfy the concentration exam requirement for the CCNP Service Provider certification.
300-510 Dumps - Pass Your Certification Exam: https://www.actual4test.com/300-510_examcollection.html
Latest Real Cisco 300-510 Exam Dumps Questions: https://drive.google.com/open?id=1JdscyxRVqjh8cRJeT5yhGknn7OxdQAUE