New 2024 Latest Questions NSE6_FWF-6.4 Dumps - Use Updated Fortinet Exam
Latest NSE6_FWF-6.4 Exam Dumps Fortinet Exam from Training Expert Actual4test
Fortinet NSE6_FWF-6.4 certification exam covers a range of topics related to secure wireless LAN solutions, including wireless access points, wireless controllers, and wireless network security. NSE6_FWF-6.4 exam is designed to test the candidate's knowledge of wireless network security best practices, wireless network design principles, and wireless network troubleshooting techniques. Fortinet NSE 6 - Secure Wireless LAN 6.4 certification exam is designed to help professionals demonstrate their expertise in Fortinet secure wireless LAN solutions, which can enhance their career opportunities and professional growth.
Fortinet NSE6_FWF-6.4 certification exam is an important milestone for network security professionals who want to validate their knowledge and expertise in designing, implementing, and managing secure wireless LAN solutions using Fortinet's products and technologies. By passing NSE6_FWF-6.4 exam, individuals can demonstrate their ability to provide effective wireless security solutions that meet the needs of modern organizations.
Fortinet NSE6_FWF-6.4 Certification Exam is an advanced-level certification program that focuses on the Fortinet NSE 6 – Secure Wireless LAN 6.4 technology. Fortinet NSE 6 - Secure Wireless LAN 6.4 certification is designed to validate the skills and knowledge of network security professionals who are responsible for managing and deploying Fortinet’s wireless LAN solutions. NSE6_FWF-6.4 exam is intended for those who have already achieved the Fortinet NSE 4 certification and have a minimum of two years of experience in network security.
NEW QUESTION # 14
Refer to the exhibits.
Exhibit A
Exhibit B
A wireless network has been created to support a group of users in a specific area of a building. The wireless network is configured but users are unable to connect to it. The exhibits show the relevant controller configuration for the APs and the wireless network.
Which two configuration changes will resolve the issue? (Choose two.)
- A. For both interfaces in the wtp-profile, configure set vaps to be "Authors"
- B. For both interfaces in the wtp-profile, configure vap-all to be manual
- C. Disable intra-vap-privacy for the Authors vap-wireless network
- D. Increase the transmission power of the AP radio interfaces
Answer: A,B
Explanation:
Explanation
The configuration changes that will resolve the issue are to configure set vaps to be "Authors" for both interfaces in the wtp-profile, and to configure vap-all to be manual for both interfaces in the wtp-profile. This is because the current configuration does not assign any VAPs to the AP interfaces, which means that no wireless networks are broadcasted by the APs. The vap-all setting determines whether all VAPs are assigned to an interface or not, and the vaps setting specifies which VAPs are assigned to an interface. By setting vap-all to manual and vaps to "Authors", the APs will only broadcast the Authors wireless network on both interfaces. Disabling intra-vap-privacy for the Authors vap-wireless network will not help, as it only affects the communication between clients on the same SSID, not their connection to the AP. Increasing the transmission power of the AP radio interfaces will not help, as it only affects the signal strength and coverage of the APs, not their broadcasting of wireless networks. References: wireless-controller vap | FortiGate / FortiOS 6.4.0, Technical Note: How to configure intra-SSID privacy
NEW QUESTION # 15
Which statement describes FortiPresence location map functionality?
- A. Provides real-time insight into user usage stats
- B. Provides real-time insight into user movements
- C. Provides real-time insight into user online activity
- D. Provides real-time insight into user purchase activity
Answer: B
NEW QUESTION # 16
Refer to the exhibits.
Exhibit A
Exhibit B
The exhibits show the diagnose debug log of a station connection taken on the controller CLI.
Which security mode is used by the wireless connection?
- A. Open, with radius MAC filtering
- B. WPA2 Personal and radius MAC filtering
- C. WPA3 Enterprise
- D. WPA2 Enterprise
Answer: B
NEW QUESTION # 17
Which two statements about distributed automatic radio resource provisioning (DARRP) are correct? (Choose two.)
- A. DARRP measurements can be scheduled to occur at specific times.
- B. DARRP performs continuous spectrum analysis to detect sources of interference. It uses this information to allow the AP to select the optimum channel.
- C. DARRP performs measurements of the number of BSSIDs and their signal strength (RSSI). The controller then uses this information to select the optimum channel for the AP.
- D. DARRP requires that wireless intrusion detection (WIDS) be enabled to detect neighboring devices.
Answer: B,D
Explanation:
DARRP (Distributed Automatic Radio Resource Provisioning) technology ensures the wireless infrastructure is always optimized to deliver maximum performance. Fortinet APs enabled with this advanced feature continuously monitor the RF environment for interference, noise and signals from neighboring APs, enabling the FortiGate WLAN Controller to determine the optimal RF power levels for each AP on the network. When a new AP is provisioned, DARRP also ensures that it chooses the optimal channel, without administrator intervention.
NEW QUESTION # 18
Which statement describes FortiPresence location map functionality?
- A. Provides real-time insight into user movements
- B. Provides real-time insight into user usage stats
- C. Provides real-time insight into user online activity
- D. Provides real-time insight into user purchase activity
Answer: B
Explanation:
This geographical data analysis provides real-time insights into user behavior.
NEW QUESTION # 19
Refer to the exhibits.
Exhibit A
Exhibit B
The exhibits show the diagnose debug log of a station connection taken on the controller CLI.
Which security mode is used by the wireless connection?
- A. Open, with radius MAC filtering
- B. WPA2 Personal and radius MAC filtering
- C. WPA3 Enterprise
- D. WPA2 Enterprise
Answer: B
NEW QUESTION # 20
Which statement is correct about security profiles on FortiAP devices?
- A. Security profiles are only supported on Bridge-mode SSIDs.
- B. Security profiles on FortiAP devices can use FortiGate subscription to inspect the traffic.
- C. Security profiles can only be applied via firewall policies on the FortiGate.
- D. Security profiles can only be applied to unencrypted wireless traffic.
Answer: B
Explanation:
Explanation
Security profiles on FortiAP devices can use FortiGate subscription to inspect the traffic, such as antivirus, web filtering, application control, and IPS. This feature is called local bridging and it allows the FortiAP to forward traffic to the FortiGate for security inspection before sending it to the destination network. This reduces the bandwidth consumption and latency of tunnel mode SSIDs. References: Secure Wireless LAN Course Description, page 9; [FortiOS 6.4.0 Handbook - Wireless Controller], page 46.
NEW QUESTION # 21
Six APs are located in a remotely based branch office and are managed by a centrally hosted FortiGate. Multiple wireless users frequently connect and roam between the APs in the remote office.
The network they connect to, is secured with WPA2-PSK. As currently configured, the WAN connection between the branch office and the centrally hosted FortiGate is unreliable.
Which configuration would enable the most reliable wireless connectivity for the remote clients?
- A. Configure a bridge mode wireless network and enable the Local standalone configuration option
- B. Install supported FortiAP and configure a bridge mode wireless network
- C. Configure a tunnel mode wireless network and enable split tunneling to the local network
- D. Configure a bridge mode wireless network and enable the Local authentication configuration option
Answer: C
NEW QUESTION # 22
Refer to the exhibits.
Exhibit A
Exhibit B
Exhibit C
A wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and IoT devices.
Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs.
To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance?
- A. Enable frequency handoff on the AP to band steer clients
- B. Increase the transmission power of the AP radios
- C. Reduce the number of wireless networks being broadcast by the AP
- D. Install another AP in the reception area to improve available bandwidth
Answer: B
NEW QUESTION # 23
Refer to the exhibits.
Exhibit A
Exhibit B
A wireless network has been created to support a group of users in a specific area of a building. The wireless network is configured but users are unable to connect to it. The exhibits show the relevant controller configuration for the APs and the wireless network.
Which two configuration changes will resolve the issue? (Choose two.)
- A. Disable intra-vap-privacy for the Authors vap-wireless network
- B. For both interfaces in the wtp-profile, configure vap-all to be manual
- C. For both interfaces in the wtp-profile, configure set vaps to be "Authors"
- D. Increase the transmission power of the AP radio interfaces
Answer: A,B
NEW QUESTION # 24
Which two statements about distributed automatic radio resource provisioning (DARRP) are correct? (Choose two.)
- A. DARRP performs measurements of the number of BSSIDs and their signal strength (RSSI). The controller then uses this information to select the optimum channel for the AP.
- B. DARRP performs continuous spectrum analysis to detect sources of interference. It uses this information to allow the AP to select the optimum channel.
- C. DARRP measurements can be scheduled to occur at specific times.
- D. DARRP requires that wireless intrusion detection (WIDS) be enabled to detect neighboring devices.
Answer: A,C
Explanation:
According to Fortinet training: "When using DARRP, the AP selects the best channel available to use based on the scan results of BSSID/receive signal strength (RSSI) to AC" and "To set the running time for DARRP optimization, use the following CLI command within the wireless controller setting: set darrp-optimize {integer}. Note that DARRP doesn't do continuous spectrum analysis..."
NEW QUESTION # 25
When configuring a wireless network for dynamic VLAN allocation, which three IETF attributes must be supplied by the radius server? (Choose three.)
- A. 81 Tunnel-Private-Group-ID
- B. 58 Egress-VLAN-Name
- C. 65 Tunnel-Medium-Type
- D. 83 Tunnel-Preference
- E. 64 Tunnel-Type
Answer: A,C,E
Explanation:
Explanation
The RADIUS user attributes used for the VLAN ID assignment are:
IETF 64 (Tunnel Type)-Set this to VLAN.
IETF 65 (Tunnel Medium Type)-Set this to 802
IETF 81 (Tunnel Private Group ID)-Set this to VLAN ID.
NEW QUESTION # 26
Where in the controller interface can you find a wireless client's upstream and downstream link rates?
- A. On the AP CLI, using the cw_diag ksta command
- B. On the controller CLI, using the diag wireless-controller wlac -d sta command
- C. On the controller CLI, using the WiFi Client monitor
- D. On the AP CLI, using the cw_diag -d sta command
Answer: A
NEW QUESTION # 27
Refer to the exhibits.
Exhibit A
Exhibit B
The exhibits show the diagnose debug log of a station connection taken on the controller CLI.
Which security mode is used by the wireless connection?
- A. Open, with radius MAC filtering
- B. WPA2 Personal and radius MAC filtering
- C. WPA3 Enterprise
- D. WPA2 Enterprise
Answer: B
NEW QUESTION # 28
Which administrative access method must be enabled on a FortiGate interface to allow APs to connect and function?
- A. Security Fabric
- B. SSH
- C. FortiTelemetry
- D. HTTPS
Answer: A
NEW QUESTION # 29
Which two phases are part of the process to plan a wireless design project? (Choose two.)
- A. Site survey phase
- B. Hardware selection phase
- C. Installation phase
- D. Project information phase
Answer: A,D
NEW QUESTION # 30
Refer to the exhibits.
Exhibit A
Exhibit B
Exhibit C
A wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and Io devices.
Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs.
To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance?
- A. Enable frequency handoff on the AP to band steer clients
- B. Reduce the number of wireless networks being broadcast by the AP
- C. Increase the transmission power of the AP radios
- D. Install another AP in the reception area to improve available bandwidth
Answer: A
NEW QUESTION # 31
As standard best practice, which configuration should be performed before configuring FortiAPs using a FortiGate wireless controller?
- A. Preauthorize APs
- B. Create wireless LAN specific policies
- C. Create a custom AP profile
- D. Set the wireless controller country setting
Answer: D
Explanation:
Explanation
Setting the wireless controller country setting is a standard best practice that should be performed before configuring FortiAPs using a FortiGate wireless controller. The country setting determines the regulatory domain and the allowed channels and power levels for the wireless network. The country setting must match the physical location of the FortiAPs to comply with local regulations and avoid interference issues.
References: Secure Wireless LAN Course Description, page 5; FortiOS 6.4.0 Handbook - Wireless Controller, page 24.
NEW QUESTION # 32
Refer to the exhibits.
Exhibit A
Exhibit B
The exhibits show the diagnose debug log of a station connection taken on the controller CLI.
Which security mode is used by the wireless connection?
- A. WPA2 Enterprise
- B. Open, with radius MAC filtering
- C. WPA2 Personal and radius MAC filtering
- D. WPA3 Enterprise
Answer: A
Explanation:
Best security option is WPA2-AES.
NEW QUESTION # 33
When using FortiPresence as a captive portal, which two types of public authentication services can be used to access guest Wi-Fi? (Choose two.)
- A. Hardware security token authentication
- B. Software security token authentication
- C. Social networks authentication
- D. Short message service authentication
Answer: C,D
NEW QUESTION # 34
What is the first discovery method used by FortiAP to locate the FortiGate wireless controller in the default configuration?
- A. DHCP
- B. Static
- C. Broadcast
- D. Multicast
Answer: A
NEW QUESTION # 35
Which two statements about background rogue scanning are correct? (Choose two.)
- A. Background rogue scanning requires DARRP to be enabled on the AP instance
- B. A dedicated radio configured for background scanning can support the connection of wireless clients
- C. When detecting rogue APs, a dedicated radio configured for background scanning can suppress the rogue AP
- D. A dedicated radio configured for background scanning can detect rogue devices on all other channels in its configured frequency band
Answer: A,D
NEW QUESTION # 36
When using FortiPresence as a captive portal, which two types of public authentication services can be used to access guest Wi-Fi? (Choose two.)
- A. Hardware security token authentication
- B. Software security token authentication
- C. Social networks authentication
- D. Short message service authentication
Answer: C,D
Explanation:
Explanation
According to the web search results, FortiPresence supports social networks authentication and short message service authentication as public authentication services for guest Wi-Fi access. Social networks authentication allows visitors to log in using their existing social media accounts, such as Facebook, Twitter, LinkedIn, Google, and Instagram. Short message service authentication allows visitors to receive a one-time password via SMS to their mobile phone number. These authentication methods are convenient and secure for visitors and provide valuable data for businesses. Software security token authentication and hardware security token authentication are not supported by FortiPresence as public authentication services for guest Wi-Fi access.
References: Configuring Captive Portal | FortiPresence 1.2.0, Configuring Captive Portal | FortiPresence
22.4.0
NEW QUESTION # 37
......
Updated Test Engine to Practice NSE6_FWF-6.4 Dumps & Practice Exam: https://www.actual4test.com/NSE6_FWF-6.4_examcollection.html
Pass Fortinet NSE6_FWF-6.4 PDF Dumps Recently Updated 37 Questions: https://drive.google.com/open?id=1-klNhEfXZXVL57jCO2N7-qsuFliYLzo-