Pass Fortinet NSE7_PBC-6.4 With Actual4test Exam Dumps - Updated on Dec-2021
Fully Updated NSE7_PBC-6.4 Dumps - 100% Same Q&A In Your Real Exam
Fortinet NSE7_PBC-6.4 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
NEW QUESTION 16
You have been tasked with deploying FortiGate VMs in a highly available topology on the Amazon Web Services (AWS) cloud. The requirements for your deployment are as follows:
* You must deploy two FortiGate VMs in a single virtual private cloud (VPC), with an external elastic load balancer which will distribute ingress traffic from the internet to both FortiGate VMs in an active-active topology.
* Each FortiGate VM must have two elastic network interfaces: one will connect to a public subnet and other will connect to a private subnet.
* To maintain high availability, you must deploy the FortiGate VMs in two different availability zones.
How many public and private subnets will you need to configure within the VPC?
- A. Two public subnets and two private subnets
- B. One public subnet and two private subnets
- C. Two public subnets and one private subnet
- D. One public subnet and one private subnet
Answer: B
NEW QUESTION 17
Refer to the exhibit.
In your Amazon Web Services (AWS) virtual private cloud (VPC), you must allow outbound access to the internet and upgrade software on an EC2 instance, without using a NAT instance. This specific EC2 instance is running in a private subnet: 10.0.1.0/24.
Also, you must ensure that the EC2 instance source IP address is not exposed to the public internet. There are two subnets in this VPC in the same availability zone, named public (10.0.0.0/24) and private (10.0.1.0/24).
How do you achieve this outcome with minimum configuration?
- A. Deploy a NAT gateway with an EIP in the public subnet, edit route tables, select Private-route and add a new route destination 0.0.0.0/0 to target the NAT gateway.
- B. Deploy a NAT gateway with an EIP in the public subnet, edit route tables, select Public-route, and delete the route destination 10.0.0.0/16 to target local.
- C. Deploy a NAT gateway with an EIP in the private subnet, edit route tables, select Private-route, and add a new route destination 0.0.0.0/0 to the target internet gateway.
- D. Deploy a NAT gateway with an EIP in the private subnet, edit the public main routing table, and change the destination route 0.0.0.0/0 to the target NAT gateway.
Answer: C
NEW QUESTION 18 
Refer to the exhibit. The exhibit shows a topology where multiple connections from clients to the same FortiGate-VM instance, regardless of the protocol being used, are required.
Which two statements are correct? (Choose two.)
- A. The Cloud Load Balancer Session Affinity setting should be changed to CLIENT_IP.
- B. The design shows an active-active FortiGate-VM architecture.
- C. The design shows an active-passive FortiGate-VM architecture.
- D. The Cloud Load Balancer Session Affinity setting should use the default value.
Answer: A,B
NEW QUESTION 19
When an organization deploys a FortiGate-VM in a high availability (HA) (active/active) architecture in Microsoft Azure, they need to determine the default timeout values of the load balancer probes.
In the event of failure, how long will Azure take to mark a FortiGate-VM as unhealthy, considering the default timeout values?
- A. 30 seconds
- B. Less than 10 seconds
- C. 16 seconds
- D. 20 seconds
Answer: A
NEW QUESTION 20
An organization deployed a FortiGate-VM in the Google Cloud Platform and initially configured it with two vNICs. Now, the same organization wants to add additional vNICs to this existing FortiGate-VM to support different workloads in their environment.
How can they do this?
- A. They can create additional vNICs in the UI console.
- B. They cannot create and add additional vNICs to an existing FortiGate-VM.
- C. They can create additional vNICs using the Cloud Shell.
- D. They can use the Compute Engine API Explorer.
Answer: D
Explanation:
Explanation/Reference: https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/62d32ecf-687f-11ea-
9384-00505692583a/FortiOS-6.4-GCP_Cookbook.pdf
NEW QUESTION 21
Your company deploys FortiGate VM devices in high availability (HA) (active-active) mode with Microsoft Azure load balancers using the Microsoft Azure ARM template. Your senior administrator instructs you to connect to one of the FortiGate devices and configure the necessary firewall rules. However, you are not sure now to obtain the correct public IP address of the deployed FortiGate VM and identify the access ports.
How do you obtain the public IP address of the FortiGate VM and identify the correct ports to access the device?
- A. In the configured load balancer, access the inbound and outbound NAT rules section.
- B. In the configured load balancer, access the inbound NAT rules section.
- C. In the configured load balancer, access the health probes section.
- D. In the configured load balancer, access the backend pools section.
Answer: A
NEW QUESTION 22
Refer to the exhibit.
You attempted to deploy the FortiGate-VM in Microsoft Azure with the JSON template, and it failed to boot up. The exhibit shows an excerpt from the JSON template.
What is incorrect with the template?
- A. The caching parameter should be None.
- B. The CreateOptions parameter should be FromImage.
- C. FortiGate-VM does not support managedDisk from Azure.
- D. The LUN ID is not defined.
Answer: B
NEW QUESTION 23
Which two statements about Microsoft Azure network security groups are true? (Choose two.)
- A. Network security groups can be applied to subnets only.
- B. Network security groups are a stateful inbound and outbound rules used for traffic filtering.
- C. Network security groups are stateless inbound and outbound rules used for traffic filtering.
- D. Network security groups can be applied to subnets and virtual network interfaces.
Answer: A,B
Explanation:
Explanation/Reference: https://docs.microsoft.com/en-us/azure/virtual-network/network-security-groups-overview
NEW QUESTION 24
You have previously deployed an Amazon Web Services (AWS) transit virtual private cloud (VPC) with a pair of FortiGate firewalls (VM04 / c4.xlarge) as your security perimeter. You are beginning to see high CPU usage on the FortiGate instances.
Which action will fix this issue?
- A. Convert the transit VPC firewalls into an auto-scaling group and launch additional EC2 instances in that group.
- B. Migrate the transit VPNs to new and larger instances (VM08 / c4.2xlarge).
- C. Convert from IPsec tunnels to generic routing encapsulation (GRE) tunnels, for the VPC peering connections.
- D. Convert the c4.xlarge instances to m4.xlarge instances.
Answer: A
NEW QUESTION 25
What is the bandwidth limitation of an Amazon Web Services (AWS) transit gateway VPC attachment?
- A. Up to 1.25 Gbps per attachment
- B. Up to 1 Gbps per attachment
- C. Up to 10 Gbps per attachment
- D. Up to 50 Gbps per attachment
Answer: A
Explanation:
Explanation/Reference: https://d1.awsstatic.com/whitepapers/building-a-scalable-and-secure-multi-vpc-aws-network- infrastructure.pdf (5)
NEW QUESTION 26
What is the bandwidth limitation of an Amazon Web Services (AWS) transit gateway VPC attachment?
- A. Up to 1.25 Gbps per attachment
- B. Up to 1 Gbps per attachment
- C. Up to 10 Gbps per attachment
- D. Up to 50 Gbps per attachment
Answer: A
NEW QUESTION 27
Which three properties are configurable Microsoft Azure network security group rule settings? (Choose three.)
- A. Action
- B. Destination port ranges
- C. Source port ranges
- D. Source and destination IP ranges
- E. Sequence number
Answer: A,B,C
Explanation:
Explanation/Reference: https://docs.microsoft.com/en-us/azure/virtual-network/network-security-groups-overview
NEW QUESTION 28
Refer to the exhibit.
You are deploying a FortiGate-VM in Microsoft Azure using the PAYG/On-demand licensing model. After you configure the FortiGate-VM, the validation process fails, displaying the error shown in the exhibit.
What caused the validation process to fail?
- A. You selected the PAYG/On-demand licensing model, but did not select correct virtual machine size.
- B. You selected the PAYG/On-demand licensing model, but did not associate a valid Azure subscription.
- C. You selected the incorrect resource group.
- D. You selected the Bring Your Own License (BYOL) licensing mode.
Answer: C
NEW QUESTION 29
Which two statements about the Amazon Cloud Services (AWS) network access control lists (ACLs) are true? (Choose two.)
- A. Network ACLs are stateful, and inbound and outbound rules are used for traffic filtering.
- B. Network ACLs are stateless, and inbound and outbound rules are used for traffic filtering.
- C. Network ACLs support allow rules and deny rules.
- D. Network ACLs must be manually applied to virtual network interfaces.
Answer: B,C
NEW QUESTION 30
Refer to the exhibit.
A customer has deployed an environment in Amazon Web Services (AWS) and is now trying to send outbound traffic from the Web servers to the Internet. The FortiGate policies are configured to allow all outbound traffic; however, the traffic is not reaching the FortiGate internal interface.
What are two possible reasons for this behavior? (Choose two.)
- A. The web servers are not configured with the default gateway.
- B. The Internet gateway (IGW) is not added to VPC (virtual private cloud).
- C. AWS security groups may be blocking the traffic.
- D. AWS source and destination checks are enabled on the FortiGate interfaces.
Answer: A,C
NEW QUESTION 31
......
Latest NSE7_PBC-6.4 Exam Dumps - Valid and Updated Dumps: https://www.actual4test.com/NSE7_PBC-6.4_examcollection.html
Verified NSE7_PBC-6.4 Exam Questions Certain Success: https://drive.google.com/open?id=1LAdtr3A1pEY_Hpa0wYvJ1Dn9WSi7LEVz