[Sep-2021] Updated ASQ Certification CQE Exam Questions BUNDLE PACK
Master The ASQ Content CQE EXAM DUMPS WITH GUARANTEED SUCCESS!
NEW QUESTION 47
Two advantages of process mapping are the ability to
. Visualize the process being described.
. Discover manufacturing problems only.
. Discover quality problems only.
IV.
Check current processes for duplication or redundancy.
- A. IIandIVonly
- B. I andIIIonly
- C. IIandIIIonly
- D. I andIVonly
Answer: D
NEW QUESTION 48
Information that is received by upper management, is often distorted. Which of the following actions is effective in countering this problem?
I. Stop killing the messenger.
II. Establishing an open door policy.
III. Practice management by walking around.
- A. I and III only
- B. I and II only
- C. I only
- D. I, II and III
Answer: D
NEW QUESTION 49
You have been asked to sample a lot of 500 units from vendor whose past quality has been about 2% defective. A sample of 40 pieces is drawn from the lot and you have been told to reject the lot if you find two or more parts defective. What is the probability of finding two or more parts defective?
- A. 0.953
- B. 0.047
- C. 0.191
- D. 0.809
Answer: C
NEW QUESTION 50
What is the key ranking difference between the Deming philosophy and the Malcolm Baldrige award criteria?
- A. Deming prescribes "all or nothing" propositions but MBNQA ranks categories with different weights.
- B. The MBNQA ranks "business results" and "customer focus", but Deming does not consider these items.
- C. The MBNQA has seven categories compared to Deming's 14 points.
- D. There is no recognized rating system for the MBNQA.
Answer: A
NEW QUESTION 51
Which table should be used to determine a confidence interval on the mean when standard deviation is NOT known and the sample size is 10?
- A. Chi-Square
- B. F
- C. z
- D. t
Answer: D
NEW QUESTION 52
Which table should be used to determine a confidence interval on the mean when standard deviation is NOT known and the sample size is 10?
- A. Chi-Square
- B. F
- C. z
- D. t
Answer: D
NEW QUESTION 53
If the probability of a success on a single trial is 0.2 and 3 trials are performed, what is the probability of at least one success?
- A. 0.384
- B. 0.600
- C. 0.488
- D. 0.008
Answer: C
NEW QUESTION 54
Inspection operations typically
- A. Occur between all manufacturing operators.
- B. Help in assuring satisfactory quality.
- C. Reduce the usability of the product or service involved.
- D. Require precise equipment in most instances.
Answer: B
NEW QUESTION 55
The failure rate model above is used to show a typical relationship of many parts between their failure rate and the time in service. The reliability function for period "B" is BEST represented by
- A. Option A
- B. Option D
- C. Option B
- D. Option C
Answer: B
NEW QUESTION 56
Which of the following actions or techniques is MOST useful in determining the original fundamental cause of a product or process nonconformance?
- A. Pareto analysis.
- B. Continuous improvement.
- C. Preventive action.
- D. Root cause analysis.
Answer: D
NEW QUESTION 57
A graph of a data set, composed of a series of rectangles, each proportional in width to the range of values in a class and proportional in height to the number of items or fraction of items falling in these classes, is called which of the following?
- A. Venn diagram.
- B. Histogram.
- C. Ogive.
- D. Raw data.
Answer: B
NEW QUESTION 58
Which of the following statements is CORRECT?
- A. The better the regression estimate, the greater the likelihood that homoscedasticity exists with the respect to the predicted variable.
- B. The higher the correlation, the better the regression estimate.
- C. Regression estimates are better made with positive correlation than with negative correlation.
- D. The lower the correlation, the greater the likelihood that homoscedasticity exists with respect to the predicted variable.
Answer: B
NEW QUESTION 59
The first and most important step, in establishing a good corporate quality plan is
- A. Determining customer requirements.
- B. Ensuring quality participation in design review.
- C. Determining manufacturing process capabilities.
- D. Evaluation vendor quality systems.
Answer: A
NEW QUESTION 60
Maintainability is
- A. Performing adequate maintenance on a system.
- B. The probability of a system being restored to functional operation within a given period of time.
- C. Probability of survival of a system for a given period of time.
- D. Maintaining a machine in satisfactory working condition.
Answer: B
NEW QUESTION 61
What is the standard deviation of the values below?
4.5, 5.1, 6.2, 2.1, 3.9
- A. 1.362
- B. 1.522
- C. 1.136
- D. 2.087
Answer: A
NEW QUESTION 62
Measurement gaging is preferable to go, no-go gaging of a quality characteristic because
- A. It requires a larger sample than go, no-go gaging does.
- B. It provides the most information per piece inspected.
- C. It requires greater skills.
- D. It is more scientific.
Answer: B
NEW QUESTION 63
A pre-award evaluation of a supplier's quality system capability should NOT include consideration of
- A. The supplier's product-quality history.
- B. The supplier's geographical location.
- C. The supplier's skills in quality control techniques.
- D. The supplier's implementation of quality manual procedures.
Answer: B
NEW QUESTION 64
An electronics firm was experiencing high rejections in their multiple connector manufacturing departments. "p" charts were introduced as part of a program to reduce defectives. Control limits were based on prior history, using the formula:
P' is the historical value of percent defective and n is the number of pieces inspected each week. After six weeks, the following record was accumulated
1,000 pieces were inspected each week in each department. Which department(s) exhibited a point or points out of control during this period (round off calculations to nearest tenth of a percentage point)?
- A. Department 105.
- B. All of the department.
- C. Department 106.
- D. Department 104.
Answer: B
NEW QUESTION 65
Reliability prediction is
I. The process of performance estimation.
II. The process of estimating the probability that a product will perform its intended function for a stated time.
III. The process of telling "how you can get there from here".
- A. I only
- B. I, II and III
- C. II only
- D. II and III only
Answer: C
NEW QUESTION 66
......
Pass ASQ CQE Exam – Experts Are Here To Help You: https://www.actual4test.com/CQE_examcollection.html
Get Latest ASQ Certification CQE Practice Test For Quick Preparation: https://drive.google.com/open?id=1F4T7M_2RjnYjYPMWcq-UjdgBBykeXCox