The Realest Study Materials C1000-132 Dumps Updated May 08, 2024
LATEST C1000-132 Exam Practice Material
IBM C1000-132 (IBM Maximo Manage v8.0 Implementation) Certification Exam is designed for professionals who are responsible for implementing and configuring IBM Maximo Asset Management v8.0 solutions. IBM Maximo Manage v8.0 Implementation certification validates the skills and knowledge required to successfully deploy and maintain IBM Maximo solutions in a variety of environments. C1000-132 exam measures the candidate’s ability to install, configure, administer, and troubleshoot IBM Maximo solutions.
IBM C1000-132 (IBM Maximo Manage v8.0 Implementation) Certification Exam is a valuable certification for professionals who want to showcase their skills and expertise in IBM Maximo. IBM Maximo Manage v8.0 Implementation certification is recognized globally and can help professionals to advance their careers and gain better job opportunities. C1000-132 exam is comprehensive and covers a wide range of topics related to IBM Maximo v8.0 implementation. IBM Maximo Manage v8.0 Implementation certification is ideal for professionals who have experience in implementing IBM Maximo solutions and want to validate their skills.
NEW QUESTION # 15
In the Work Order Tracking application, a Work Order is generated from a Preventive Maintenance (PM) record. How is the target finish date calculated?
- A. the PM target finish date
- B. the Work Order target start date + the Job Plan duration
- C. the Job Plan finish date
- D. the Job Plan start date + the Job Plan duration
Answer: B
Explanation:
In the Work Order Tracking application, when a Work Order is generated from a Preventive Maintenance (PM) record, the target finish date is calculated as the Work Order target start date + the Job Plan duration.
NEW QUESTION # 16
Select all that apply
What is the priority order for selecting a Safety Plan when a Job Plan is applied to a Work Order?
Answer:
Explanation:
1 - Use the Safety Plan associated with the Asset referenced on the Work Order.
2 - Use the Safety Plan associated with the Location referenced on the Work Order.
3 - Use the Safety Plan associated with the Asset's Rotating Item, for the Asset referenced on the Work Order.
4 - Use the Safety Plan associated with the Location's Rotating Item, for the Location referenced on the Work Order.
NEW QUESTION # 17
Where in Maximo can the Server IP Addresses and Logged in users be observed?
- A. Server Management Consol
- B. Administration Work Center
- C. Database Configuration application
- D. Maximo Management Interface Work Center
Answer: D
Explanation:
In Maximo Manage, the Server IP Addresses and Logged in users can be observed in the Maximo Management Interface Work Center.
NEW QUESTION # 18
What are two of the filters in the Select Value of a Location or Asset in the Service Requests application?
- A. User/Custodians
- B. Work Zones
- C. Service Group/Services
- D. Public
- E. Service Address
Answer: C,E
Explanation:
Two of the filters in the Select Value of a Location or Asset in the Service Requests application in IBM Maximo Manage are Service Address and Service Group/Services.
NEW QUESTION # 19
What happens if the Specification of a rotating item is updated in the Item Master application?
- A. New locations and assets that reference the rotating item will inherit the changes, there are no changes to existing locations and assets.
- B. By default, all locations and assets referencing the rotating item will be updated with the changes.
- C. By default, existing assets referencing the rotating item will be updated with the changes, there are no changes to existing locations.
- D. Only locations inherit the specification from a rotating item and only when new locations are created. Assets only inherit the specification from an asset template.
Answer: A
Explanation:
If the Specification of a rotating item is updated in the Item Master application, new locations and assets that reference the rotating item will inherit the changes. There are no changes to existing locations and assets.
NEW QUESTION # 20
What are three integration End Points Handlers available in Maximo Manage?
- A. XLS
- B. EMAIL
- C. WSDL
- D. XMLFILE
- E. FLATFILE
- F. KAFKA
Answer: B,D,E
Explanation:
Three integration End Points Handlers available in Maximo Manage are XMLFILE, EMAIL and FLATFILE.
NEW QUESTION # 21
A user wishes to perform the same work tasks on several assets simultaneously. How can this be configured?
- A. A Route should be created with each stop being one Asset and the Job Plan associated with the Route record.
- B. A Work Order Hierarchy should be created against the same Job Plan used for all stops.
- C. A Master Job Plan should be created with Tasks for each Asset.
- D. The Assets should be specified on the Multiple Assets, Locations and CIs table on the Work Order.
Answer: A
Explanation:
To perform the same work tasks on several assets simultaneously, a route can be created in the Routes application. A route is a series of work orders that are generated in a specific sequence to maintain a group of assets. Each stop in the route can be associated with a specific asset, and the job plan can be assigned to the route record, which means the same job plan tasks can be performed on each asset.
NEW QUESTION # 22
At which data storage level are locations, assets and storerooms defined?
- A. Site
- B. Set
- C. Organization
- D. System
Answer: A
Explanation:
Locations, assets and storerooms are defined at the Site level in IBM Maximo Manage.
NEW QUESTION # 23
How many failure reports can be created for the same Work Order?
- A. just one failure report
- B. unlimited failure reports for either a work order or any of its tasks
- C. one failure report for the work order and only one for each task of the work order
- D. unlimited failure reports for each work order, but none for a task
Answer: C
Explanation:
In IBM Maximo Manage, you can create one failure report for a Work Order and only one for each task of the Work Order.
NEW QUESTION # 24
How can a Master Preventive Maintenance record be associated with multiple non-rotating assets?
- A. Use the Apply Down Hierarchy action on the Master Preventive Maintenance record.
- B. Use the Move/Modify Assets action.
- C. Use an Asset Template.
- D. Add the Assets to the Multiple Assets table on the Master Preventive Maintenance record.
Answer: D
Explanation:
To associate a Master Preventive Maintenance record with multiple non-rotating assets, we can add the assets to the Multiple Assets table on the Master Preventive Maintenance record. This allows us to associate the preventive maintenance schedule with multiple assets, ensuring that the maintenance activities are performed on each of the associated assets as scheduled.
NEW QUESTION # 25
In the Receiving application, what are the three statuses that show the overall receipt status of the purchase order?
- A. NONE
- B. PARTIAL
- C. RETURNED
- D. COMPLETE
- E. WINSP
- F. VOID
Answer: A,B,D
Explanation:
In the Receiving application in IBM Maximo Manage, the three statuses that show the overall receipt status of the purchase order are COMPLETE, PARTIAL and NONE.
NEW QUESTION # 26
The loT Connector provides Maximo Manage, Maximo Health and Maximo Predict the ability to connect to which two data sources?
- A. Maximo Monitor
- B. IBM Watson loT Platform
- C. Maximo Assist
- D. Maximo Safety
- E. Maximo Spatial
Answer: A,B
Explanation:
IoT Connector provides Maximo Manage, Maximo Health and Maximo Predict the ability to connect to C. IBM Watson IoT Platform and E. Maximo Monitor data sources. The IoT Connector in the Administration Work Center can be used to configure a connection to an IoT platform such as IBM Watson IoT Platform and IBM Maximo Asset Monitor1.
NEW QUESTION # 27
Which Maximo Application Suite add-on enables managing certificates for assets and training requirements for personnel?
- A. Asset Configuration Manager
- B. Maximo HR Manager
- C. Service Provider
- D. Health, Safety and Environment (HSE)
Answer: D
Explanation:
The Health, Safety and Environment (HSE) add-on in the IBM Maximo Application Suite enables managing certificates for assets and training requirements for personnel. This add-on provides functionality for managing health and safety risks, including compliance with regulations, management of environmental incidents, and tracking of personnel certifications and training.
NEW QUESTION # 28
In the Item Master application, with what can a Kit Item be associated?
- A. Service item
- B. Non Rotating item
- C. Condition enabled item
- D. Lot item
Answer: B
Explanation:
a Kit Item can be associated with A. Non Rotating item. When you create a kit record for an item in the Item Master application, you can define the structure of the kit using the Item Assembly Structure tab1. When adding a kit to a storeroom, if the component items do not exist in the storeroom, inventory records are created for these items1. However, you cannot create item kits that contain condition-enabled, rotating or lotted items1.
NEW QUESTION # 29
On a Work Order with no GL Account specified, which GL Account will take precedence?
- A. Job Plan
- B. Work Order Control Account
- C. Asset
- D. Location
Answer: B
NEW QUESTION # 30
What is a core application in Maximo Manage?
- A. Customer Billing
- B. Permit to Work
- C. Graphical Scheduling
- D. Maintenance Version Control
Answer: B
Explanation:
The Permit to Work application is a core application in IBM Maximo Manage v8.0. This application allows users to manage work permits, ensure compliance with safety regulations, and ensure that work is authorized before it is started. Other core applications in Maximo Manage include Work Order Tracking, Asset Management, and Inventory Management.
NEW QUESTION # 31
What information can be updated in the Master PM application for an associated Preventive Maintenance record (PM)?
- A. PM Forecast
- B. Work Order Status
- C. PM Hierarchy
- D. Generate Work Orders
Answer: A
Explanation:
The PM Forecast field on the Master PM record is used to specify how many days ahead you want to forecast work orders for associated PMs2. This field can be updated in the Master PM application and affects how many work orders are generated from the associated PMs.
NEW QUESTION # 32
What are the three default values used with the position of a Crew Type or Crew?
- A. Leader
- B. Apprentice
- C. Technician
- D. Driver
- E. Helper
- F. Supervisor
Answer: A,B,E
Explanation:
In IBM Maximo Manage v8.0 implementation, the three default values used with the position of a Crew Type or Crew are Helper, Leader, and Apprentice. These values represent the different roles that members of a crew can assume.
NEW QUESTION # 33
Which two statuses of a Purchase Order will allow a receipt of new items to be processed in the Receiving application if the Purchase Order is not being revised?
- A. PNDREV
- B. HOLD
- C. APPR
- D. REVISD
- E. INPRG
Answer: C,E
Explanation:
In IBM Maximo Manage, if a Purchase Order is not being revised, two statuses that will allow a receipt of new items to be processed in the Receiving application are APPR and INPRG.
NEW QUESTION # 34
When working with Purchase Requests, which statement is correct?
- A. Purchase Request must have a vendor specified.
- B. One Purchase Request can contain both Item and Material type lines
- C. Purchase Request Description is mandatory in the header section.
- D. All Purchase Requests must be approved by an authorized person.
Answer: B
Explanation:
When working with Purchase Requests in IBM Maximo Manage, one Purchase Request can contain both Item and Material type lines.
NEW QUESTION # 35
Which Maximo application can be used to generate replacement plans for assets?
- A. Maximo Health, Safety and Environmental (HSE)
- B. Maximo Predict
- C. Maximo Manage
- D. Maximo Health
Answer: D
Explanation:
The Maximo Health application can be used to generate replacement plans for assets.
NEW QUESTION # 36
When using flow control on a Work Order, how ca from the Parent to Child Work Orders?
user ensure that Work Order status changes are inherited
- A. In the Organization application, check the Intarit Status Changes flag in Work Order Options -> Flow Control Options.
- B. Ensure the Asset or Location
on both the Parent and Child Work Order. - C. Check the Inherit Status Changes flag on the Work Order and ensure the mxe.app.wo.flowControlStatuslnheritance System Properties is set to 1.
- D. Check the Roll Down Status Changes flag on the Parent and Child Work Order.
Answer: A
Explanation:
When using flow control on a Work Order in IBM Maximo Manage, to ensure that Work Order status changes are inherited from the Parent to Child Work Orders, you should go to the Organization application and check the Inherit Status Changes flag in Work Order Options -> Flow Control Options.
NEW QUESTION # 37
In the Inventory Usage application when the type is TRANSFER, if a user changes the status to COMPLETE what type of transaction record is created?
- A. Transaction Type RETURN in MATUSETRANS table
- B. Transaction Type SHIPTRANSFER in MATRECTRANS table
- C. Transaction Type TRANSFER in MATRECTRANS table
- D. Transaction Type ISSUE in MATUSETRANS table
Answer: B
Explanation:
In the Inventory Usage application when the type is TRANSFER, if a user changes the status to COMPLETE a transaction record of type SHIPTRANSFER is created in the MATRECTRANS table.
NEW QUESTION # 38
Which statement is true regarding Master Preventative Maintenance (PM) records?
- A. Associated PM records can be created for a Master PM which does not have an item
- B. Associated PM records can only be created for a rotating item's location.
- C. Associated PM records are temporary and expire after 90 days.
- D. Associated PM records can only be created for a rotating item's asset.
Answer: A
Explanation:
Regarding Master Preventative Maintenance (PM) records in IBM Maximo Manage, associated PM records can be created for a Master PM which does not have an item.
NEW QUESTION # 39
......
Study HIGH Quality C1000-132 Free Study Guides and Exams Tutorials: https://www.actual4test.com/C1000-132_examcollection.html
New C1000-132 Actual Exam Dumps, IBM Practice Test: https://drive.google.com/open?id=14Xd1JejSH5ejeSeDjEpR-1mOqLAEXiH6