Updated Nov-2021 Test Engine or PDF for the Cisco 500-920 test to help you quickly prepare for the Cisco exam!
Full 500-920 Practice Test and 42 unique questions with explanations waiting just for you, get it now!
NEW QUESTION 16
When booting up a Cisco UCS Server you want to see boot time diagnostic messages of the POST, what action is required for you to do so?
- A. Enable Quiet Boot on the Server's BIOS
- B. Disable Fast Boot on the Server's Service Profile
- C. Disable Fast Boot on the Server's BIOS
- D. Restart the Server
- E. Enable Quiet Boot on the Server's Service Profile
Answer: E
NEW QUESTION 17
Which two statements describes connecting the IO Modules in the UCS chassis to the Fabric interconnects? (Choose two )
- A. Connect Fl-A to IOM A and IOM B in each chassis
- B. Connect Fl-B to the IOM B of each chassis
- C. Connect Fl-A to the IOM A of each chassis
- D. Connect Fl-B to IOM A and IOM B in each chassis
- E. Connect Fl-A to the IOM B of each chassis
- F. Connect Fl-B to the IOM A of each chassis
Answer: B,C,E
NEW QUESTION 18
What is the likely cause of an intermittent SAN Boot fails?
- A. LUN ID Mismatch
- B. FCoE used instead of FC
- C. Misconfigured SAN boot target in the boot policy of the service profile
- D. Wrong boot order in the service profile
Answer: C
NEW QUESTION 19
What is the next step after performing a UCS firmware upgrade, and downloading the latest drivers both for your RAID Controller and your Fibre Channel HBA?
Check the HCL
- A. Test device driver compatibility
- B. No need to do anything Drivers are automatically installed for you
- C. No Drivers are needed in a UCS environment
- D. Apply the device driver update to the devices
Answer: A
NEW QUESTION 20
In order to create an Inband Profile for Cisco Integrated Management Controller (IMC) connectivity, what do you need to perform first?
- A. Create an IPMI Policy
- B. Create a Management IP Pool, a MAC Address Pool, and a VLAN Pool
- C. Create a Management IP Pool, a VLAN. and a VLAN Group
- D. Create a Service Profile
- E. Create different VLANs, with different VLAN IDs
Answer: D
NEW QUESTION 21
What are three possible causes of service profile association failure due to iSCSI configuration issue? (Choose three )
- A. Inappropriate network configuration
- B. Misconfigured iSCSI parameters
- C. iSCSI Target out of configured range of services
- D. Misconfigured LUN. LUN masking
- E. Wrong WWNN
- F. Improperly assigned iSCSI Class of Service
Answer: A,B,C
NEW QUESTION 22
When troubleshooting UCS initialization issues that require Fabric Interconnect reboots, which Fabric Interconnect should be rebooted first?
- A. The subordinate Fabric Interconnect
- B. The Cisco UCS Manager will determine with Fabric Interconnect to reboot
- C. The primary Fabric Interconnect
- D. Both Fabric Interconnects must be rebooted simultaneously
Answer: C
NEW QUESTION 23
What is the result of enabling the Core File Exporter in UCS Manager?
- A. A core dump file will be immediately created and transmitted using HTTP protocol
- B. A core dump must be remotely activated by Cisco TAC.
- C. A core dump will immediately be generated and will be exported
- D. If a subsequent triggering event occurs, a core dump will be generated and sent by TFTP
Answer: C
NEW QUESTION 24
After performing a UCS firmware upgrade, which two UCS components will require updated drivers? (Choose two )
- A. Cisco Fabric Interconnects
- B. VIC Cards and Fiber Channel HBAs
- C. RAID Controllers
- D. Cisco UCS Manager
Answer: A,B
NEW QUESTION 25
Which two interfaces allow access to Cisco UCS Manager? (Choose two )
- A. Cisco IMC
- B. Cisco UCS Manager GUI
- C. Cisco UCS Manager XML API
- D. Cisco KVM
Answer: B,C
NEW QUESTION 26
The command show interface veth 705 is telling you that the bound interface is Ethernet 3/1/2 What is the location of the blade that has veth 705 associated to it?
- A. There is not enough information
- B. Chassis 1. Slot 2
- C. Chassis 3. Slot 2
- D. Chassis 3, Slot 1
Answer: D
NEW QUESTION 27
You are experiencing intermittent connectivity issues on one specific Cisco UCS server Some applications work, while other do not transfer data You suspect jumbo frames limitations Which two places do you check the jumbo frame settings? (Choose two )
- A. Check the fibre channel port configuration for jumbo frame configuration
- B. Check server's individual vNICs and/or vHBAs properties
- C. Check server's QoS System Class
- D. Check server's service profile and/or service profile template
- E. Check upstream switch ports frame size configuration
Answer: C,E
NEW QUESTION 28
Which are two Application Gateways primary roles? (Choose two )
- A. Automate updates to the XML Database
- B. Communicate with end points and report their health and state
- C. Manage configuration changes during FSM transitions
- D. Manage configuration changes made with UCS Manager
- E. Communicate with virtual machines and report health and state
Answer: A,C
NEW QUESTION 29
Which statement best describes managing Cisco UCS servers using NX-OS CLI on the Fabric Interconnects?
- A. The NX-OS CLI on the Fabric Interconnects allows you to change the connectivity configuration between the servers and Fabric Interconnects
- B. The NX-OS CLI on the Fabric Interconnects allows you to manage QoS parameters on the Fabric Interconnects and an upstream LAN switch
- C. The NX-OS CLI on the Fabric Interconnects allows you to change the connectivity configuration between the Fabric Interconnects and an upstream LAN switch.
- D. The NX-OS CLI on the Fabric Interconnects allows you to view, but not change the connectivity configuration between the Fabric Interconnects and an upstream LAN switch.
Answer: C
NEW QUESTION 30
The UCS Chassis Discovery Policy has been set to four and a new chassis is connected with two links What is the resulting chassis recognition action?
- A. The chassis will be recognized and both links will be active
- B. The chassis will be recognized but only one of the links will be active.
- C. The Chassis Discovery Policy will automatically reset to two links, since it always tracks the physical connections
- D. The chassis will not be recognized
Answer: D
NEW QUESTION 31
Which ethernet port type is used when configuring UCS Fabric Interconnect connections to Cisco UCS C-series servers?
- A. Direct Connect Port
- B. Service Profile Port
- C. Server Port
- D. Uplink Port
Answer: D
NEW QUESTION 32
......
Full 500-920 Practice Test and 42 unique questions with explanations waiting just for you, get it now: https://www.actual4test.com/500-920_examcollection.html