Verified JN0-106 Dumps Q&As - JN0-106 Test Engine with Correct Answers
Pass Your JN0-106 Dumps as PDF Updated on 2026 With 245 Questions
Juniper JN0-106 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
NEW QUESTION # 108
What information would you find using the CLI help command?
- A. hyperlinks for remediation actions
- B. a URL for accessing the technical documentation
- C. an explanation for specific system log error messages
- D. message of the day
Answer: C
Explanation:
The Junos OS CLI is engineered with an extensive, self-contained help subsystem designed to provide immediate technical guidance without requiring constant reference to external manuals. The help command is a versatile tool that operates through several key sub-commands: topic, reference, and log. While help topic provides conceptual overviews and help reference displays specific configuration syntax and hierarchical requirements, the help log command is specifically tailored for system maintenance and troubleshooting.
The primary purpose of help log is to provide a detailed explanation for specific system log error messages generated by the device. When a Junos daemon or process writes an entry to the syslog, it includes a unique message identifier or " tag. " By executing help log < message-tag > , an architect can retrieve a clinical breakdown of why the message was generated, the severity of the event, and often the recommended action to resolve the underlying issue. This capability is vital for rapid interpretation of complex system events in real- time. It ensures that administrators have authoritative, context-aware information directly at the terminal, effectively bridging the gap between raw diagnostic output and actionable technical intelligence within the Junos environment. Reference: User Interfaces, CLI Help Facilities, help log.
NEW QUESTION # 109
Which routing table is used for IPv6 unicast routes by default?
- A. inet.0
- B. inet.1
- C. inet.6
- D. inet6.0
Answer: D
Explanation:
The inet6.0 routing table is the default table used by Junos OS to store IPv6 unicast routes.
NEW QUESTION # 110
Your team alerts you that users connected to ge-0/0/5 are experiencing intermittent slowness. You log in to the switch and want to see live, real-time traffic updates for that interface to determine whether the link is being over-utilized. Which monitoring command should you use in this scenario?
- A. show interfaces terse
- B. monitor interface ge-0/0/5
- C. show chassis hardware
- D. show interfaces ge-0/0/5 extensive
Answer: B
Explanation:
In the Junos OS environment, distinguishing between static diagnostic data and real-time telemetry is crucial for effective troubleshooting. While commands like show interfaces provide a cumulative snapshot of counters since the last reboot or counter clear, they do not easily reveal instantaneous spikes or fluctuating utilization patterns. To address the requirement for " live, real-time traffic updates, " the monitor interface command is the correct operational tool.
When an architect executes monitor interface ge-0/0/5, the CLI launches an interactive, ncurses-based screen that refreshes every second. This display provides immediate visibility into input and output bits-per-second (bps), packets-per-second (pps), and error increments. Unlike static commands, this real-time stream allows a technician to observe micro-bursts or sustained high-utilization periods as they occur, which is essential for diagnosing " intermittent slowness " caused by congestion. In contrast, show chassis hardware focuses on physical inventory, and show interfaces terse only provides administrative and operational status. Even the extensive version of the show command only offers a point-in-time calculation of averages. Therefore, monitor interface is the primary mechanism for interactive performance auditing of individual ports on the Packet Forwarding Engine.
Reference: Operational Monitoring and Maintenance, Real-time Interface Monitoring.
NEW QUESTION # 111
You power on a new MX Series router for the first time and connect to the console. You notice that no transit interfaces are passing traffic. In this scenario, which statement is correct?
- A. All interfaces are enabled with DHCP client enabled.
- B. All interfaces are enabled and have an IP address of 10.0.0.1.
- C. The interfaces are configured as Layer 2 trunk ports.
- D. The interfaces are not configured.
Answer: D
Explanation:
A new Junos device starts with a minimal default configuration where interfaces are not configured with IP addressing or enabled for traffic forwarding, so transit traffic does not pass until interfaces are explicitly configured.
NEW QUESTION # 112 
The MX204 has 12 built-in ports. Referring to the exhibit, to which interface does the arrow point?
- A. ##-0/0/7
- B. ##-0/2/7
- C. ##-0/1/7
- D. ##-0/1/6
Answer: C
Explanation:
The Juniper MX204 is a fixed-configuration router that utilizes a specific hierarchical naming convention for its physical interfaces: type-fpc/pic/port. In the MX204 architecture, there is a single built-in Flexible PIC Concentrator (FPC), which is always designated as FPC 0 . This FPC is subdivided into two logical Physical Interface Cards (PICs): PIC 0 and PIC 1 .
As shown in the exhibit, PIC 0 contains four high-speed ports (labeled 0/0 through 0/3) that typically support
40GbE or 100GbE speeds. PIC 1 contains eight ports (labeled 1/0 through 1/7) designed for 1GbE or 10GbE connectivity. These ports are arranged in a stacked, $2 \times 4$ grid. The labeling system on the chassis indicates the port numbers for each column. In the fourth column of the PIC 1 block, the top port is identified as 1/6 and the bottom port as 1/7 .
The blue arrow in the exhibit points directly to the bottom-right interface in the PIC 1 section. Correlating this physical location with the chassis labels confirms that the port number is 7. When combined with the FPC and PIC identifiers, the full interface name is xe-0/1/7 (assuming a 10GbE transceiver is installed). Understanding this physical-to-logical mapping is essential for accurate cabling and configuration within the Junos OS, ensuring that administrators apply the correct logical unit and protocol settings to the intended physical hardware.
Reference: Junos OS Fundamentals, Interface Naming, MX204 Hardware Overview.
NEW QUESTION # 113
According to HPE Juniper Networking, when should you use the replace pattern command instead of the rename command?
- A. You want to globally replace all occurrences of a specific string.
- B. You need to edit a single component name in the configuration.
- C. You want to create a private candidate configuration.
- D. You want to disable a physical interface.
Answer: A
Explanation:
In Junos OS configuration management, the rename and replace pattern commands serve distinct roles for modifying the candidate configuration. The rename command is used when an administrator needs to change the identifier of a specific, single configuration object-such as changing an interface name or a policy-term name-while keeping the underlying properties of that object intact. In contrast, the replace pattern command is a powerful utility designed for bulk modifications across the configuration hierarchy. It utilizes string matching or regular expressions to find every occurrence of a specific text string and substitute it with another.
This is particularly useful in scenarios involving mass updates, such as migrating an entire subnet across multiple interface descriptions, firewall filters, and routing policy terms simultaneously. While rename acts locally on a specific path, replace pattern can be applied globally from the root of the configuration or constrained to a specific sub-hierarchy. As a Senior Architect, it is critical to understand that replace pattern does not just change names; it can modify any part of the statement text, making it an essential tool for efficient large-scale configuration refactoring without the need for manual, line-by-line edits. Reference:
Configuration Basics, Modifying Configuration, Command Line Editing.
NEW QUESTION # 114
What are two physical interface properties? (Choose two.)
- A. MTU
- B. routing protocols
- C. IP address
- D. MAC address
Answer: A,D
Explanation:
Two physical interface properties in Junos OS include the MAC address (A) and the Maximum Transmission Unit (MTU) size (D). The MAC address is a hardware identifier for the network interface, while the MTU size determines the largest packet size that the interface can transmit without needing to fragment the packet.
NEW QUESTION # 115
Click the Exhibit button.
Which command displays the output in the format shown in the exhibit?
- A. show configuration | display detail
- B. show configuration | display inheritance
- C. show configuration
- D. show configuration | display set
Answer: D
Explanation:
The display set option shows the configuration in set command format, matching the style shown in the exhibit.
NEW QUESTION # 116
When troubleshooting a problem, you issue the following commands in sequence:
* show chassis alarms
* show chassis fpc
* show chassis fpc detail
* show chassis errors fpc-slot 0
In this scenario, what happens when you press the up arrow key twice at the prompt?
- A. The show chassis fpc command is displayed at the prompt.
- B. The show chassis fpc detail command is displayed at the prompt.
- C. The show chassis alarms command is displayed at the prompt.
- D. The show chassis errors fpc-slot 0 command is displayed at the prompt.
Answer: B
Explanation:
The Junos OS Command Line Interface (CLI) utilizes an advanced command-line editing environment influenced by standard Emacs and Unix terminal behaviors. One of the most critical features for operational efficiency is the command history buffer. This buffer automatically records a sequence of previously executed commands, allowing administrators to recall, modify, and re-execute them without manual re-entry.
The navigation of this history buffer is strictly chronological and operates as a stack. When the up arrow key is pressed once, the CLI retrieves the most recent command that was successfully entered-in this scenario, show chassis errors fpc-slot 0. Pressing the up arrow key a second time moves the cursor one step further back into the history stack to the command that preceded the most recent one. Following the provided sequence, the command executed prior to the " errors " check was show chassis fpc detail. Consequently, the second press of the up arrow key will display show chassis fpc detail at the prompt. This mechanism is essential for architects during intensive troubleshooting sessions, enabling them to cycle through relevant diagnostic commands rapidly while maintaining focus on the hardware output rather than syntax repetition. Reference:
User Interfaces, CLI Editing Features, Command History.
NEW QUESTION # 117
Which two characteristics describe Junos OS software? (Choose two.)
- A. Junos OS uses a modular architecture with independent processes.
- B. Junos OS runs only on routers.
- C. Junos OS supports automation features.
- D. Junos OS is a monolithic code base.
Answer: A,C
Explanation:
Junos OS includes built-in automation capabilities such as scripting and APIs to enable network automation. It is also designed with a modular architecture where independent processes run separately, improving stability and fault isolation.
NEW QUESTION # 118
Click the Exhibit button.
Referring to the exhibit, what is the source IP address of the ping that was executed?
- A. 10.24.0.4
- B. 10.12.0.2
- C. 10.23.0.2
- D. 10.23.0.3
Answer: C
Explanation:
The exhibit shows a ping test being executed from router R2 to the IP address 10.23.0.3. Since the ping command is issued on R2 and we see successful replies from 10.23.0.3, it means the source of the ping must be an interface on R2. Given the network diagram and the IP address scheme, the source IP address of the ping is on the interface ge-0/0/2 of R2, which is in the subnet 10.23.0.0/24. The only logical IP address for R2's interface in this subnet, based on standard networking practices and the given options, would be 10.23.0.2. The other addresses provided in the options belong to different subnets or are the destination of the ping itself.
NEW QUESTION # 119
You want to configure the management port on a Juniper device. In this scenario, what is the management interface name?
- A. mtun0
- B. st0
- C. mt0
- D. fxp0
Answer: D
Explanation:
On Juniper devices, the management interface is named fxp0 and is used for out-of-band management access.
NEW QUESTION # 120
Which statement accurately describes the purpose of route preference in Junos OS?
- A. It determines which route is selected as active when multiple routes to the same destination exist.
- B. It controls the redistribution of routes between routing instances.
- C. It sets the metric for forwarding traffic through the Packet Forwarding Engine.
- D. It determines the maximum number of routes that can be installed in the routing table.
Answer: A
Explanation:
In the Junos OS architecture, the routing table often receives prefix information from various sources, including direct connections, static configurations, and multiple dynamic interior and exterior gateway protocols. Route preference, frequently referred to as administrative distance in other vendor environments, serves as the primary tie-breaking mechanism used by the Routing Engine to select a single "active" route when multiple entries for the exact same destination prefix exist from different protocol sources. Each routing source is assigned a default numerical value, where a lower numerical value indicates a more preferred or "trustworthy" source. For instance, a direct route typically carries a preference of 0, while OSPF internal routes default to 10 and BGP routes default to 170.
The selection process evaluates these values; the route with the lowest preference is installed in the forwarding table and used for transit traffic. If preferences are equal, Junos secondary tie- breakers like local preference or metric are considered. Understanding this hierarchy is critical for traffic engineering and ensuring predictable routing behavior across the fabric. Modification of these default values via routing policy allows administrators to influence path selection without altering the underlying protocol metrics themselves.
NEW QUESTION # 121
What information does the forwarding table require so that the device forwards traffic? (Choose three.)
- A. outgoing interface name
- B. BGP local preference value
- C. next hop IP address
- D. OSPF metric value
- E. next hop MAC address
Answer: A,C,E
Explanation:
The forwarding table in a network device requires specific information to efficiently forward traffic toward its destination. This includes the next hop IP address, which indicates the next router or device in the path to the destination. The outgoing interface name identifies the physical or logical interface through which the packet should be sent to reach the next hop. Lastly, the next hop MAC address is crucial for Layer 2 forwarding decisions, allowing the device to encapsulate the IP packet in a frame that can be understood by Ethernet or other Layer 2 protocols. OSPF metric values and BGP local preference values are used in the routing decision process to select the best path and populate the forwarding table but are not directly used by the forwarding table to forward traffic.
NEW QUESTION # 122
Which two functions are performed by the PFE? (Choose two.)
- A. It maintains the routing table.
- B. It forwards transit traffic.
- C. It implements firewall filters.
- D. It selects active routes.
Answer: B,C
Explanation:
The Packet Forwarding Engine (PFE) represents the data plane of a Junos device, responsible for the high- speed processing and movement of packets through the system. Its primary role is to forward transit traffic- data that enters one interface and exits another-at wire speed using specialized hardware such as Application- Specific Integrated Circuits (ASICs). To accomplish this, the PFE utilizes a local copy of the Forwarding Information Base (FIB) provided by the Routing Engine, ensuring that forwarding decisions are made locally without requiring the main CPU ' s intervention for every packet.
In addition to pure forwarding, the PFE is the functional component that implements and executes firewall filters and policing. Because firewall filters must be applied to transit traffic at line rate to prevent bottlenecks, the PFE evaluates incoming and outgoing packets against configured filter terms in hardware. This ensures that security policies and traffic shaping are applied with minimal latency. It is critical to note that the PFE does not maintain the master routing table (RIB) or perform route selection; those " intelligent " control plane functions are strictly the domain of the Routing Engine. By offloading the repetitive tasks of packet inspection and hardware forwarding to the PFE, Junos OS maintains consistent performance even under heavy traffic loads or complex security configurations. Reference: Junos OS Fundamentals, Packet Forwarding Engine Architecture.
NEW QUESTION # 123
Which two statements accurately describe the relationship between the routing table and the forwarding table on a Junos device? (Choose two.)
- A. The routing table selects the best route based on routing information.
- B. The routing table is built from the forwarding table.
- C. The forwarding table is built from the routing table.
- D. The routing table resides in the data plane for fast lookups.
Answer: A,C
Explanation:
The relationship between the routing table (Routing Information Base or RIB) and the forwarding table (Forwarding Information Base or FIB) is the cornerstone of the Junos OS architectural separation between the control and data planes. The routing table resides in the control plane on the Routing Engine (RE). Its primary role is to aggregate all reachability information from every configured protocol and select the best route for each destination prefix based on criteria like preference and metrics.
Once the Routing Engine has identified the single " active " best path for a destination, it distills this complex routing data into a simplified, streamlined version called the forwarding table . The forwarding table contains only the essential information needed to move a packet: the destination prefix, the egress interface, and the Layer 2 next-hop MAC address. The RE then " pushes " this forwarding table to the Packet Forwarding Engine (PFE) in the data plane. By having the PFE use a table built from the routing table , Junos ensures that transit traffic can be processed at wire speed without the overhead of complex routing logic. This one-way flow-from the comprehensive RIB on the RE to the optimized FIB on the PFE-allows the device to maintain high performance even while routing protocols are recalculating or the management plane is under heavy load.
NEW QUESTION # 124
You must view the forwarding table on your Junos device to troubleshoot a packet forwarding issue. In this scenario, which command would display the forwarding table?
- A. show forwarding-options
- B. show route forwarding-table
- C. show route table
- D. show ip forwarding
Answer: B
Explanation:
The show route forwarding-table command displays the forwarding table used by the Packet Forwarding Engine to make packet forwarding decisions.
NEW QUESTION # 125
Which rollback command reverts the device to the configuration that was active before the most recent commit?
- A. rollback 1
- B. rollback previous
- C. rollback last
- D. rollback 0
Answer: A
Explanation:
Rollback 0 refers to the currently active configuration, while rollback 1 refers to the configuration that was active immediately before the last commit.
NEW QUESTION # 126
Which two statements about route preference in Junos OS are correct? (Choose two.)
- A. Route preference is considered after evaluating the longest prefix match.
- B. Lower route preference values indicate higher priority.
- C. Route preference determines the forwarding table size.
- D. Higher route preference values indicate higher priority.
Answer: A,B
Explanation:
In Junos OS, route preference (often referred to as administrative distance in other operating systems) is the mechanism used to select the " best " path when the routing table receives multiple advertisements for the exact same destination prefix from different routing sources. The core rule for preference is that lower values indicate a more preferred or " higher priority " route . For example, a direct route has a default preference of 0, a static route is 5, and OSPF internal routes are 10. If a router learns about the same network from both OSPF and a static entry, it will select the static route because 5 is lower than 10.
Crucially, route preference is only evaluated after the longest prefix match (LPM) has been determined.
LPM is the absolute first step in packet forwarding; the router will always choose the most specific route available (e.g., a /28 over a /24). Only if there are multiple entries for that same /28 does the router look at preference to break the tie. It is a common misconception that a lower preference value can override a more specific prefix; in reality, a /32 route with a preference of 170 (BGP) will always win over a /24 route with a preference of 5 (Static). Understanding this hierarchy is vital for network architects when designing redundant paths and predictable failover behaviors.
NEW QUESTION # 127
Which OSPF neighbor state indicates that two routers have fully synchronized their link-state databases?
- A. 2-Way
- B. ExStart
- C. Full
- D. Init
Answer: C
Explanation:
The Full state indicates that OSPF routers have completed database synchronization and are fully adjacent.
NEW QUESTION # 128
You power on a new MX Series router for the first time and connect to the console. You notice that no transit interfaces are passing traffic. In this scenario, which statement is correct?
- A. All interfaces are enabled with DHCP client enabled.
- B. All interfaces are enabled and have an IP address of 10.0.0.1.
- C. The interfaces are configured as Layer 2 trunk ports.
- D. The interfaces are not configured.
Answer: D
Explanation:
When you initially unbox and power on a Juniper MX Series router, it loads a factory-default configuration
. Unlike some consumer-grade or lower-end enterprise switches that might have all ports active in a default VLAN, high-performance routers like the MX Series prioritize security and intentionality. In the factory- default state, the transit interfaces are not configured .
While the physical hardware interfaces (such as ge-0/0/0 or xe-0/1/0) are detected by the Junos kernel, they lack any logical unit or protocol family definitions (like family inet or family inet6). Without a logical unit- even a simple unit 0-the Packet Forwarding Engine (PFE) will not accept or forward any traffic arriving on those ports. Furthermore, as discussed in previous questions, the device is essentially in a " locked " state; you cannot even commit new changes to enable these interfaces until you have defined a root-authentication password. This " blank slate " approach ensures that no traffic accidentally flows through a newly installed provider-edge device until an architect has explicitly defined the routing policies, firewall filters, and interface parameters required for the specific network environment. To begin passing traffic, you must manually define the logical units and assign the appropriate IP addresses or switching parameters to each interface.
Reference: Configuration Basics, Initial Configuration, Factory Default Settings.
NEW QUESTION # 129
Which two elements are required when defining a security policy on an SRX device? (Choose two.)
- A. Match criteria such as source/destination address and application
- B. An IPsec VPN tunnel
- C. A configured routing protocol
- D. Source and destination zones
Answer: A,D
Explanation:
A security policy requires defining the source and destination zones the policy applies to, along with match criteria (addresses, applications) and an action (permit, deny, or reject).
NEW QUESTION # 130
Which two functions are performed by the PFE? (Choose two.)
- A. It maintains the routing table.
- B. It forwards transit traffic.
- C. It implements firewall filters.
- D. It selects active routes.
Answer: B,C
Explanation:
The Packet Forwarding Engine (PFE) in Junos OS performs several key functions, including implementing firewall filters (A) and forwarding transit traffic (C). The PFE applies firewall filter rules to incoming and outgoing traffic and is responsible for the high-speed forwarding of packets based on the information in the forwarding table.
NEW QUESTION # 131
What are two advantages of using the Junos OS? (Choose two.)
- A. It enables you to roll back to a previous configuration.
- B. It is modular.
- C. It supports up to a maximum of two previous configurations.
- D. It pushes your configuration changes "live" immediately.
Answer: A,B
Explanation:
One of the key advantages of Junos OS is its ability to roll back to previous configurations. This feature allows administrators to revert to an earlier configuration state, which is invaluable for quickly recovering from configuration errors or undesired changes. Junos OS maintains an archive of previous configurations, enabling easy rollback to any saved state. Another significant advantage of Junos OS is its modular design. The operating system is structured so that different processes and services run in separate protected memory spaces, enhancing the stability and reliability of the system. If one process fails, it does not affect the others, thereby minimizing the risk of system-wide failures.
NEW QUESTION # 132
......
Pass Juniper JN0-106 Exam Info and Free Practice Test: https://www.actual4test.com/JN0-106_examcollection.html
Juniper JN0-106 Real Exam Questions and Answers FREE: https://drive.google.com/open?id=16m0xgLGf_k0X2XJgNvHoV9t_vz-YDXLt