Verified NSE7_OTS-7.2 Dumps Q&As - NSE7_OTS-7.2 Test Engine with Correct Answers
Pass Your NSE7_OTS-7.2 Dumps as PDF Updated on 2024 With 74 Questions
Fortinet NSE7_OTS-7.2 (Fortinet NSE 7 - OT Security 7.2) certification exam is designed to validate the knowledge and skills of cybersecurity professionals in securing operational technology (OT) networks. Fortinet NSE 7 - OT Security 7.2 certification exam is part of the Fortinet Network Security Expert (NSE) program, which is a comprehensive training and certification program that provides cybersecurity professionals with the knowledge and skills they need to protect their organizations from cyber threats.
Fortinet NSE7_OTS-7.2 certification exam is a valuable credential for IT professionals who want to enhance their career prospects in the field of OT security. Fortinet NSE 7 - OT Security 7.2 certification demonstrates that the holder has a deep understanding of OT security best practices, and is capable of designing and implementing secure OT networks. Fortinet NSE 7 - OT Security 7.2 certification is also a testament to the holder's commitment to ongoing professional development, and can help them stand out in a competitive job market.
NEW QUESTION # 38
In a wireless network integration, how does FortiNAC obtain connecting MAC address information?
- A. RADIUS
- B. End station traffic monitoring
- C. MAC notification traps
- D. Link traps
Answer: A
Explanation:
Explanation
FortiNAC can integrate with RADIUS servers to obtain MAC address information for wireless clients that authenticate through the RADIUS server.
NEW QUESTION # 39
Which three Fortinet products can be used for device identification in an OT industrial control system (ICS)?
(Choose three.)
- A. FortiManager
- B. FortiNAC
- C. FortiAnalyzer
- D. FortiSIEM
- E. FortiGate
Answer: B,D,E
Explanation:
Explanation
A: FortiNAC - FortiNAC is a network access control solution that provides visibility and control over network devices. It can identify devices, enforce access policies, and automate threat response.
D: FortiSIEM - FortiSIEM is a security information and event management solution that can collect and analyze data from multiple sources, including network devices and servers. It can help identify potential security threats, as well as monitor compliance with security policies and regulations.
E: FortiAnalyzer - FortiAnalyzer is a central logging and reporting solution that collects and analyzes data from multiple sources, including FortiNAC and FortiSIEM. It can provide insights into network activity and help identify anomalies or security threats.
NEW QUESTION # 40
How can you achieve remote access and internel availability in an OT network?
- A. Implement SD-WAN to manage traffic on each ISP link.
- B. Add additional internal firewalls to access OT devices.
- C. Create more access policies to prevent unauthorized access.
- D. Create a back-end backup network as a redundancy measure.
Answer: A
NEW QUESTION # 41
Refer to the exhibit and analyze the output.
Which statement about the output is true?
- A. This is a sample of a PAM event type.
- B. This is a sample of an SNMP temperature control event log.
- C. This is a sample of FortiGate interface statistics.
- D. This is a sample of a FortiAnalyzer system interface event log.
Answer: A
NEW QUESTION # 42
An OT administrator has configured FSSO and local firewall authentication. A user who is part of a user group is not prompted from credentials during authentication.
What is a possible reason?
- A. Two-factor authentication is not configured with RADIUS authentication method
- B. The user was determined by Security Fabric
- C. FortiNAC determined the user by DHCP fingerprint method
- D. FortiGate determined the user by passive authentication
Answer: D
NEW QUESTION # 43
Refer to the exhibit, which shows a non-protected OT environment.
An administrator needs to implement proper protection on the OT network. Which three steps should an administrator take to protect the OT network? (Choose three.)
- A. Deploy an edge FortiGate between the internet and an OT network as a one-arm sniffer.
- B. Configure firewall policies with industrial protocol sensors
- C. Deploy a FortiGate device within each ICS network.
- D. Configure firewall policies with web filter to protect the different ICS networks.
- E. Use segmentation
Answer: A,B,D
NEW QUESTION # 44
With the limit of using one firewall device, the administrator enables multi-VDOM on FortiGate to provide independent multiple security domains to each ICS network. Which statement ensures security protection is in place for all ICS networks?
- A. The management VDOM must have access to all global security services.
- B. Traffic between VDOMs must pass through the physical interfaces of FortiGate to check for security incidents.
- C. Each VDOM must have an independent security license.
- D. Each traffic VDOM must have a direct connection to FortiGuard services to receive the required security updates.
Answer: B
NEW QUESTION # 45
Refer to the exhibit.
An OT network security audit concluded that the application sensor requires changes to ensure the correct security action is committed against the overrides filters.
Which change must the OT network administrator make?
- A. Set all application categories to apply default actions.
- B. Set the priority of the C.BO.NA.1 signature override to 1.
- C. Change the security action of the industrial category to monitor.
- D. Remove IEC.60870.5.104 Information.Transfer from the first filter override.
Answer: D
Explanation:
According to the Fortinet NSE 7 - OT Security 6.4 exam guide1, the application sensor settings allow you to configure the security action for each application category andnetwork protocol override. The security action determines how the FortiGate unit handles traffic that matches the application category or network protocol override. The security action can be one of the following:
* Allow: The FortiGate unit allows the traffic without any further inspection.
* Monitor: The FortiGate unit allows the traffic and logs it for monitoring purposes.
* Block: The FortiGate unit blocks the traffic and logs it as an attack.
The priority of the network protocol override determines the order in which the FortiGate unit applies the security action to the traffic. The lower the priority number, the higher the priority. For example, a priority of 1 is higher than a priority of 10.
In the exhibit, the application sensor has the following settings:
* The industrial category has a security action of allow, which means that the FortiGate unit will not inspect or log any traffic that belongs to this category.
* The IEC.60870.5.104 Information.Transfer network protocol override has a security action of block, which means that the FortiGate unit will block and log any traffic that matches this protocol.
* The IEC.60870.5.104 Control.Functions network protocol override has a security action of monitor, which means that the FortiGate unit will allow and log any traffic that matches this protocol.
* The IEC.60870.5.104 Start/Stop network protocol override has a security action of allow, which means that the FortiGate unit will not inspect or log any traffic that matches this protocol.
* The IEC.60870.5.104 Transfer.C.BO.NA.1 network protocol override has a security action of block, which means that the FortiGate unit will block and log any traffic that matches this protocol.
The problem with these settings is that the IEC.60870.5.104 Transfer.C.BO.NA.1 network protocol override has a lower priority than the IEC.60870.5.104 Information.Transfer network protocol override. This means that if the traffic matches both protocols, the FortiGate unit will apply the security action of the higher priority override, which is block. However, the IEC.60870.5.104 Transfer.C.BO.NA.1 protocol is used to transfer binary outputs, which are essential for controlling OT devices. Therefore, blocking this protocol could have negative consequences for the OT network.
To fix this issue, the OT network administrator must set the priority of the IEC.60870.5.104 Transfer.C.BO.NA.1 network protocol override to 1, which is higher than the priority of the IEC.60870.5.104 Information.Transfer network protocol override. This way, the FortiGate unit will apply the security action of the lower priority override, which is allow, to the traffic that matches both protocols. This will ensure that the FortiGate unit does not block the traffic that is used to transfer binary outputs, while still blocking the traffic that is used to transfer information.
1: NSE 7 Network Security Architect - Fortinet
NEW QUESTION # 46
Refer to the exhibit and analyze the output. Which statement about the output is true?
- A. This is a sample of a PAM event type.
- B. This is a sample of an SNMP temperature control event log.
- C. This is a sample of FortiGate interface statistics.
- D. This is a sample of a FortiAnalyzer system interface event log.
Answer: A
NEW QUESTION # 47
An administrator wants to use FortiSoC and SOAR features on a FortiAnalyzer device to detect and block any unauthorized access to FortiGate devices in an OT network.
Which two statements about FortiSoC and SOAR features on FortiAnalyzer are true? (Choose two.)
- A. You cannot use Windows and Linux hosts security events with FortiSoC.
- B. You must set correct operator in event handler to trigger an event.
- C. You can automate SOC tasks through playbooks.
- D. Each playbook can include multiple triggers.
Answer: B,C
Explanation:
Ref: https://docs.fortinet.com/document/fortianalyzer/7.0.0/administration-guide/268882/fortisoc
NEW QUESTION # 48
In a wireless network integration, how does FortiNAC obtain connecting MAC address information?
- A. RADIUS
- B. End station traffic monitoring
- C. MAC notification traps
- D. Link traps
Answer: A
Explanation:
FortiNAC can integrate with RADIUS servers to obtain MAC address information for wireless clients that authenticate through the RADIUS server.
NEW QUESTION # 49
Refer to the exhibit.
An operational technology rule is created and successfully activated to monitor the Modbus protocol on FortiSIEM. However, the rule does not trigger incidents despite Modbus traffic and application logs being received correctly by FortiSIEM.
Which statement correctly describes the issue on the rule configuration?
- A. The attributes in the Group By section must match the ones in Fitters section.
- B. The first condition on the SubPattern filter must use the OR logical operator.
- C. The Aggregate attribute COUNT expression is incompatible with the filters.
- D. The SubPattern is missing the filter to match the Modbus protocol.
Answer: A
NEW QUESTION # 50
When you create a user or host profile, which three criteria can you use? (Choose three.)
- A. An existing access control policy
- B. Location
- C. Host or user group memberships
- D. Host or user attributes
- E. Administrative group membership
Answer: B,C,D
Explanation:
Explanation
https://docs.fortinet.com/document/fortinac/9.2.0/administration-guide/15797/user-host-profiles
NEW QUESTION # 51
Refer to the exhibit.
An operational technology rule is created and successfully activated to monitor the Modbus protocol on FortiSIEM. However, the rule does not trigger incidents despite Modbus traffic and application logs being received correctly by FortiSIEM.
Which statement correctly describes the issue on the rule configuration?
- A. The attributes in the Group By section must match the ones in Fitters section.
- B. The first condition on the SubPattern filter must use the OR logical operator.
- C. The Aggregate attribute COUNT expression is incompatible with the filters.
- D. The SubPattern is missing the filter to match the Modbus protocol.
Answer: A
NEW QUESTION # 52
Refer to the exhibit. Based on the topology designed by the OT architect, which two statements about implementing OT security are true? (Choose two.)
- A. Firewall policies should be configured on FortiGate-3 and FortiGate-4 with industrial protocol sensors.
- B. FortiGate-3 and FortiGate-4 devices must be in a transparent mode.
- C. Micro-segmentation can be achieved only by replacing FortiGate-3 and FortiGate-4 with a pair of FortiSwitch devices.
- D. IT and OT networks are separated by segmentation.
Answer: A,D
NEW QUESTION # 53
Refer to the exhibit.
Which statement is true about application control inspection?
- A. The parent signature takes precedence over the child application signature.
- B. The industrial application control inspection process is unique among application categories.
- C. Security actions cannot be applied on the lowest level of the hierarchy.
- D. You can control security actions only on the parent-level application signature
Answer: D
NEW QUESTION # 54
......
Pass Fortinet NSE7_OTS-7.2 Exam Info and Free Practice Test: https://www.actual4test.com/NSE7_OTS-7.2_examcollection.html
Fortinet NSE7_OTS-7.2 Real Exam Questions and Answers FREE: https://drive.google.com/open?id=11N26_J7Y1w65Xl5EpZ7aUT-OmvLY3NXM