QUESTION NO: 1
A network administrator implements a SIP-based IP telephone solution. The objective is to ensure that APs use 100% of their airtime for network access whenever a voice call is taking place, to minimize communication delays. The network administrator also wants to ensure that a log entry is generated when voice calls occur.
Which setup accomplishes these tasks?
A network administrator implements a SIP-based IP telephone solution. The objective is to ensure that APs use 100% of their airtime for network access whenever a voice call is taking place, to minimize communication delays. The network administrator also wants to ensure that a log entry is generated when voice calls occur.
Which setup accomplishes these tasks?
Correct Answer: B
Vote an answer
QUESTION NO: 2
Refer to the exhibit.
Based on the output shown in the exhibitm with which Aruba devices has Access-1 established tunnels?
Refer to the exhibit.
Based on the output shown in the exhibitm with which Aruba devices has Access-1 established tunnels?
Correct Answer: A
Vote an answer
QUESTION NO: 3
Refer to the exhibit.
A network engineer configures some VAPs in customer groups and creates a pool of licenses with enough units for seven APs. The network engineer deploys the first two APs, looks at the ap database, and notices the APs are inactive and experience licensing-related issues.
Based on the show command outputs shown in the exhibit, what must the engineer do to solve the problem?
Refer to the exhibit.
A network engineer configures some VAPs in customer groups and creates a pool of licenses with enough units for seven APs. The network engineer deploys the first two APs, looks at the ap database, and notices the APs are inactive and experience licensing-related issues.
Based on the show command outputs shown in the exhibit, what must the engineer do to solve the problem?
Correct Answer: B
Vote an answer
QUESTION NO: 4
Refer to the exhibit.
An end user attempts to connect to the company's campus network and cannot find the enterprise SSID even though there is an AP operating engineer attempts to resolve the end user's connectivity problem and issues the show ap active command on the controller shown in the exhibit.
What are the possible reasons why the end user cannot find the enterprise SSID? (Choose two.)
Refer to the exhibit.
An end user attempts to connect to the company's campus network and cannot find the enterprise SSID even though there is an AP operating engineer attempts to resolve the end user's connectivity problem and issues the show ap active command on the controller shown in the exhibit.
What are the possible reasons why the end user cannot find the enterprise SSID? (Choose two.)
Correct Answer: A,B
Vote an answer
QUESTION NO: 5
Refer to the exhibit.
A 7008 Branch Office Controller (BOC) is deployed in a remote office behind a core router. This core router does not support 802.1q encapsulation. The Mobility Controller (MC) is the gateway for two tunneling mode SSIDs, as shown in the exhibit.
Which two different configuration options ensure that wireless users are able to reach the branch network through the router? (Select two.)
Refer to the exhibit.
A 7008 Branch Office Controller (BOC) is deployed in a remote office behind a core router. This core router does not support 802.1q encapsulation. The Mobility Controller (MC) is the gateway for two tunneling mode SSIDs, as shown in the exhibit.
Which two different configuration options ensure that wireless users are able to reach the branch network through the router? (Select two.)
Correct Answer: A,E
Vote an answer
QUESTION NO: 6
Refer to the exhibit.
A network administrator configures a Mobility Master (MM)-Mobility Controller (MC) solution and integrates it with AirWave. The network administrator configures the SNMP and terminal credentials in the MM and MC, and then monitors the mobility devices from AirWave, including Clarity for user association and basic network services verification. However, AirWave does not display any UCC data that is available in the MM dashboard.
Based on the information shown in the exhibit, which configuration step should the network administrator do next in the MM to complete the integration with AirWave?
Refer to the exhibit.
A network administrator configures a Mobility Master (MM)-Mobility Controller (MC) solution and integrates it with AirWave. The network administrator configures the SNMP and terminal credentials in the MM and MC, and then monitors the mobility devices from AirWave, including Clarity for user association and basic network services verification. However, AirWave does not display any UCC data that is available in the MM dashboard.
Based on the information shown in the exhibit, which configuration step should the network administrator do next in the MM to complete the integration with AirWave?
Correct Answer: B
Vote an answer
QUESTION NO: 7
Refer to the exhibit.
A network administrator deploys a Mobility Master (MM)-Mobility Controller (MC) network with APs in different locations. Users in one of the locations report that the WiFi network works fine for several hours, ang then they are suddenly disconnected. The symptom may happen at any time, up to three times every day, and lasts no more than two minutes.
After some research, the network administrator logs into the MM and reviews the output shown in the exhibit.
Based on this information, the network administrator logs into the MM and reviews the output shown in the exhibit.
Based on this information, what is the most likely reason users get disconnected?
Refer to the exhibit.
A network administrator deploys a Mobility Master (MM)-Mobility Controller (MC) network with APs in different locations. Users in one of the locations report that the WiFi network works fine for several hours, ang then they are suddenly disconnected. The symptom may happen at any time, up to three times every day, and lasts no more than two minutes.
After some research, the network administrator logs into the MM and reviews the output shown in the exhibit.
Based on this information, the network administrator logs into the MM and reviews the output shown in the exhibit.
Based on this information, what is the most likely reason users get disconnected?
Correct Answer: B
Vote an answer
QUESTION NO: 8
Company 1 and Company 2 are medium-sized companies that collaborate in a joint venture. Each company owns a building, and each has their own ArubaOS 8 Mobility Master (MM)-Mobility Controller (MC) deployment. The buildings are located in front of one another. For the initial stage of the project, the companies want to interconnect their networks with fiber, and broadcast each other's SSIDs.
These are the requirements:
- Do not unify the company's network management responsibilities.
- Allow each company to take care of their own SSID setups when broadcasted in the other building.
- Terminate Company 1 user traffic on Company 1 MCs when they connect to Company 2 APs.
- Terminate Company 2 user traffic on Company 2 MCs when they connect to Company 1 APs.
What is needed to meet the solution requirements?
Company 1 and Company 2 are medium-sized companies that collaborate in a joint venture. Each company owns a building, and each has their own ArubaOS 8 Mobility Master (MM)-Mobility Controller (MC) deployment. The buildings are located in front of one another. For the initial stage of the project, the companies want to interconnect their networks with fiber, and broadcast each other's SSIDs.
These are the requirements:
- Do not unify the company's network management responsibilities.
- Allow each company to take care of their own SSID setups when broadcasted in the other building.
- Terminate Company 1 user traffic on Company 1 MCs when they connect to Company 2 APs.
- Terminate Company 2 user traffic on Company 2 MCs when they connect to Company 1 APs.
What is needed to meet the solution requirements?
Correct Answer: C
Vote an answer