[2024] Use Valid New Free 350-601 Exam Dumps & Answers
350-601 Braindumps PDF, Cisco 350-601 Exam Cram
Cisco 350-601 certification exam is designed to keep up with the advancements in technology and the changing requirements of the IT industry. 350-601 exam is regularly updated to ensure that it covers the latest technologies and trends in the data center industry. Implementing Cisco Data Center Core Technologies (350-601 DCCOR) certification exam is a great way for IT professionals to stay up-to-date with the latest advancements in data center technologies and to enhance their skills in the implementation of data center technologies.
NEW QUESTION # 93
An engineer must configure the order in which the server attempts to boot from available boot device types using Cisco Integrated Management Controller (Cisco IMC). The engineer must change the boot order configuration during the setup and apply the new requirements multiple times. The requirement is to change the Cisco IMC actual boot order so it is different from the configured boot order. Which setting accomplishes this goal?
- A. Set the boot configuration directly through BIOS.
- B. Apply UEFI Secure Boot for a nonsupported operating system.
- C. Configure the legacy and precision boot order to be mutually exclusive.
- D. Enable the system to boot with the configured boot order.
Answer: D
Explanation:
https://www.cisco.com/en/US/docs/unified_computing/ucs/c/sw/gui/config/guide/1.5/b_Cisco_UCS_C-series_G
NEW QUESTION # 94
An engineer must configure Cisco IMC server management NIC for autonegotiation. Which setting should be selected?
- A. shared LOM
- B. dedicated
- C. shared LOM EXT
- D. Cisco card
Answer: A
Explanation:
To configure the Cisco IMC server management NIC for autonegotiation, you should select the shared LOM setting. This setting allows the Cisco IMC to share the LAN on motherboard (LOM) ports with the host operating system and negotiate the speed and duplex settings automatically. The shared LOM setting also provides redundancy and failover capabilities for the Cisco IMC management access. The other settings (Cisco card, dedicated, and shared LOM EXT) do not enable autonegotiation for the Cisco IMC server management NIC.
References: For more details on how to configure the Cisco IMC server management NIC, please refer to the following resources:
* Cisco Integrated Management Controller Configuration Guide
* Cisco Integrated Management Controller (IMC) Data Sheet
NEW QUESTION # 95
An engineer must configure the HSRP protocol to implement redundancy using two Cisco Nexus Series Switches In addition, the HSRP must meet these requirements Switch1 must retain the primary role if switch2 goes offline Switch1 must retain the primary role until normal conditions are restored.
Switch1 and switch2 must ensure that the routing tables are converged before taking the active role switch2 must retain the primary role if the default gateway is not reachable Drag and drop the configuration commands from the right to the left to meet the requirements. The commands are used more than once Not all commands are used
Answer:
Explanation:
NEW QUESTION # 96
What is an advantage of NAS compared to SAN?
- A. It offers enhanced NFS features.
- B. It offers enhanced security features
- C. It provides lossless throughput.
- D. It functions in an existing IP environment.
Answer: D
Explanation:
NAS functions in an existing IP environment which is one of its advantages over SAN. SAN typically requires a separate network infrastructure, while NAS can be deployed on the existing IP network, leading to cost savings and simplified management.
References:
* Cisco Data Center Core Technologies source documents or study guide
* Cisco Learning Network Store
* Cisco Data Center Solutions
NEW QUESTION # 97 
Refer to the exhibit. An engineer must monitor the Ethernet port and the corresponding VLAN traffic for the hyper4 device The SW3 device is a Cisco Nexus 7000 Series Switch Drag and drop the code snippets from the right into the boxes in the configuration to meet these requirements.
Answer:
Explanation:
Explanation:
Graphical user interface Description automatically generated
NEW QUESTION # 98
Refer to the exhibit. Which backup operation type not include the preserve identities feature?
- A. All configuration
- B. Full state
- C. System configuration
- D. Logical configuration
Answer: B
NEW QUESTION # 99
Refer to the exhibit.
Which two Cisco UCS components are upgraded as a result of the configuration? (Choose two.)
- A. IOMs
- B. Cisco UCS Manager
- C. adapters
- D. board controller
- E. BIOS
Answer: A,B
NEW QUESTION # 100
A Cisco MDS 9000 Series Switch is configured for SAN Analytics and SAN Telemetry Streaming. An engineer must enable analytics for NVMe on interfaces in the range of fc1/1-12. Due to a large amount of traffic generated in the SAN environment, the data must be collected at regular intervals of 60 seconds from ports fc 1-12 and then for ports fc13-24 for the next 60 seconds. Ports in the range fc4/13-14 were already enabled for analytics. Which set of commands must be used to meet these requirements?
- A. Option A
- B. Option D
- C. Option B
- D. Option C
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/8_x/config/san_analytics/cisco-mds9000-san-analytics-telemetry-streaming-config-guide-8x/configuring_san_telemetry-streaming.html
NEW QUESTION # 101
A new employee must be granted access to add VLANs into an existing Cisco UCS Manager and configure NTP synchronization with date and time zone settings. Which two privileges must be granted to the employee to complete the task? (Choose two.)
- A. Ext LAN Policy (ext-lan-policy)
- B. Ext LAN Config (ext-lan-security)
- C. Service Profile Compute (Is-compute)
- D. Service Profile Network Policy (Is-network-policy)
- E. Service Profile Config (Is-config)
Answer: B,E
Explanation:
The new employee needs to add VLANs into an existing Cisco UCS Manager and configure NTP synchronization with date and time zone settings. Option B, Ext LAN Config (ext-lan-security), grants privileges to configure external LAN connectivity settings including VLANs. Option D, Service Profile Config (Is-config), allows for configuring service profiles including NTP synchronization settings. References
:
* Cisco UCS Manager GUI Configuration Guide, Release 4.0 - Configuring User Accounts and Organizations [Cisco UCS Manager], Configuring User Accounts and Organizations, Configuring Roles
* Cisco UCS Manager CLI Configuration Guide, Release 4.0 - Configuring User Accounts and Organizations [Cisco UCS Manager], Configuring User Accounts and Organizations, Configuring Roles
NEW QUESTION # 102
An engineer must implement a disaster recovery policy for the Cisco UCS infrastructure. The solution must meet these criteria:
The Recovery Point Objective must be 48 hours.
The backup must use encrypted transmission.
The Recovery Time Objective must be 4 hours.
Which configuration set must be used in the scheduled backup to meet these requirements?
- A. Option A
- B. Option D
- C. Option B
- D. Option C
Answer: B
NEW QUESTION # 103
Where is the witness deployed in a two-node Cisco HyperFlex Edge deployment?
- A. to a third-party cloud provider
- B. to the HyperFlex Edge two-node cluster
- C. to Cisco Intersight
- D. to an additional server with network access to HyperFlex Edge
Answer: C
NEW QUESTION # 104
An engineer must remove the running configuration of a Cisco Nexus 9000 Series Switch and replace it with a backup file without restarting the switch. The backup file is stored on an SFTP server that is reachable via the An engineer must remove the running configuration mgmt0 interface Which set of commands accomplishes this task'
- A. Option D
- B. Option A
- C. Option C
- D. Option B
Answer: C
NEW QUESTION # 105
Refer to Exhibit:
An engineer must use the python module in the guest shell of the Cisco Nexus 9000 Series switch to shutdown port Ethernet 1/4 Which command set will accomplish this?
- A. Option D
- B. Option A
- C. Option B
- D. Option C
Answer: C
NEW QUESTION # 106 
Refer to the exhibit. The MDS-EDGE-Switch and MDS-Core-Switch are configured with NPV and NPIV features The FLOGI from Cisco UCS is received by the MDS-Core-Switch on interface fc1/2. An engineer tried to move all traffic between the MDS-EDGE-Switch and MOS-Core-Switch from interface fc 1/2 to fc1/3, but the attempt failed. Which set of actions completes the configuration?
- A. Option D
- B. Option A
- C. Option C
- D. Option B
Answer: C
NEW QUESTION # 107
An engineer must implement a solution that prevents untrusted DHCP servers from compromising the network. The feature must be configured on a Cisco Nexus 7000 Series Switch and applied to VLAN 10. The legitimate DHCP servers are connected to interface Ethernet 2/4. Which configuration set must be used to meet these requirements?
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: C
Explanation:
The DHCP snooping feature acts as a firewall between untrusted hosts and trusted DHCP servers. It validates DHCP messages received from untrusted sources and filters out invalid messages. To implement this on a Cisco Nexus 7000 Series Switch for VLAN 10, you would enable DHCP snooping for that VLAN and then configure the specific interface connected to the legitimate DHCP servers to be trusted. This ensures that DHCP responses from the legitimate servers are allowed, while responses from any other servers are blocked.
References:
* Cisco Nexus 7000 Series NX-OS Security Configuration Guide1
* Configuring DHCP Snooping2
NEW QUESTION # 108
Refer to the exhibit.
An engineer is implementing zoning on two Cisco MDS switches. After the implementation is finished, E Ports that connect the two Cisco MDS switches becomes isolated. What is wrong with the implementation?
- A. Different zone set names must be configured on both MDS switches.
- B. Zones must have the same name on both MDS switches for the E ports to function.
- C. Zones are local to the MDS switch and name service must be used to activate the connection between E ports.
- D. E Ports on both MDS switches must be configured as F ports for the zoning to function.
Answer: C
Explanation:
The issue with the implementation is that zones are local to the MDS switch, and name service must be used to activate the connection between E ports. In Cisco MDS switches, zoning is enforced at the switch level. Each switch in a fabric can have a different active zone set or none at all. The name server for each switch only contains information about devices that are logged into that specific switch.
NEW QUESTION # 109
Refer to the exhibit.
What is the result of this series of commands?
- A. It updates the firmware on adapter 1/1/1 immediately.
- B. It verifies the firmware update on the server.
- C. It activates the firmware on the next adapter boot.
- D. It reboots the server immediately.
Answer: C
NEW QUESTION # 110
Which adjacency server configuration makes two OTV edge devices located in the same site bring up the dual- site adjacency?
- A.
- B.
- C.
- D.
Answer: D
Explanation:
Section: Network
NEW QUESTION # 111 
Refer to the exhibit. An engineer must deploy 70 Cisco Nexus 9000 Series Switches in a new environment The requirement is to use Cisco DCNM as a management tool to deploy, manage and monitor the new switches. In addition. DCNM is configured with a zero-touch POAP feature to facilitate fabric creation Which action meets these requirements?
- A. Create common credentials on all of the new Nexus switches
- B. Configure an IP helper address on interface VLAN 10 of the management switch
- C. Create a SPAN session on the management switch to send the traffic from VLAN 10 to Ethernet 1/1.
- D. Configure SNMP on the new Nexus switches to send SNMP messages to the DCNM server
Answer: B
Explanation:
Configuring an IP helper address on interface VLAN 10 of the management switch is the correct action to meet the requirements. This configuration allows the management switch to forward DHCP requests from the new switches in different VLANs to the DCNM server, which can then use the zero-touch POAP feature to facilitate fabric creation.
NEW QUESTION # 112
......
The Implementing Cisco Data Center Core Technologies (350-601 DCCOR) certification exam is a professional-level exam that is ideal for network engineers, administrators, and architects who want to advance their careers in the field of data center technologies. 350-601 exam tests the candidates' knowledge of data center infrastructure, including compute, storage, network, and automation, and their ability to implement and manage these technologies in a complex data center environment.
Feel Cisco 350-601 Dumps PDF Will likely be The best Option: https://www.actual4test.com/350-601_examcollection.html
New 2024 350-601 Sample Questions Reliable 350-601 Test Engine: https://drive.google.com/open?id=1FrO7nQX37-RtD9UjqhluugOM0-VPTdR5