Exam Questions Answers Braindumps 350-601 Exam Dumps PDF Questions [Q234-Q253]

Exam Questions Answers Braindumps 350-601 Exam Dumps PDF Questions

Download Free Cisco 350-601 Real Exam Questions

NEW QUESTION # 234
A customer data center experiences bandwidth contention that affects the servers connected to the NPV enabled switch The NPV switch is connected to the NPIV switch using two 10 Gb uplinks but the traffic originating front the connected hosts to the core switch exceeds the available bandwidth The engineers decided to add a third uplink to the NPV server to increase the available bandwidth Which set of commands must be used to provision the new uplink?

A. Option C
B. Option B
C. Option A
D. Option D

Answer: B

NEW QUESTION # 235
Drag and drop the characteristics from the left onto the NAS protocols on the right.

Answer:

Explanation:

Explanation
NFS: B, D
SMB: A,C

NEW QUESTION # 236
Refer to the exhibit.

Refer to the exhibit. An engineer logs all occurrences of a configuration being saved. The engineer must generate an additional log message when someone attempts to change the configuration for interface Ethernet 1/1. Which set of commands must be used to meet these requirements?

A. Option C
B. Option D
C. Option A
D. Option B

Answer: B

NEW QUESTION # 237
A network engineer needs to configure system logging on the MDS switch. The messages must be displayed with the severity level of "warning" and above. For security reasons the users must be logged out of the console after 5 minutes of inactivity Which configuration must be applied to meet these requirements?

A. Option C
B. Option B
C. Option A
D. Option D

Answer: B

Explanation:

NEW QUESTION # 238
Drag and drop the storage technologies from the left onto the correct descriptions on the right.

Answer:

Explanation:

NEW QUESTION # 239
Which communication method does NFS use for requests between servers and clients?

A. SMB
B. PRC
C. XDR
D. SSC

Answer: B

Explanation:
Explanation
https://www-uxsup.csx.cam.ac.uk/pub/doc/redhat/WS2.1/rhl-rg-en-7.2/ch-nfs.html

NEW QUESTION # 240
An engineer installed a new Nexus switch with the mgm0interface in vrf management. Connectivity to the rest of the network needs to be tested from the guest shell of the NX-OS. Which command tests connectivity from the shell of the NX-OS?

A. Option C
B. Option B
C. Option A
D. Option D

Answer: B

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/programmability/guide/b_Cisco_Nexus_9000_Series_NX-OS_Programmability_Guide_7x/Guest_Shell.html

NEW QUESTION # 241
Refer to the exhibit.

A network engineer must configure port E1/31- 32 to forward only storage server traffic of VLAN 200 on Cisco fabric interconnects A and B.
Port E1/31- 32 is not reserved for any other traffic. Which port type must be configured to accomplish this goal?

A. unified uplink
B. FCoE uplink
C. uplink
D. FCoE storage

Answer: C

NEW QUESTION # 242
Multiple roles are applied to a user on the Cisco MDS 9000 Series Switch.
Which statement is true?

A. Access to a command takes priority over being denied access to a command.
B. The last role assigned takes precedence over previous roles.
C. Any commands that have conflicting settings between roles are denied.
D. The first role assigned takes precedence over subsequent roles.

Answer: A

Explanation:
Section: Compute

NEW QUESTION # 243
Refer to the exhibit. A host with source address 10.10.10.10. sends traffic to multicast group 239.1.1.1. how do the vPC switches forward the multicast traffic?

A. If multicast traffic is received on Po11 Switch2, the traffic is forwarded out only one Po20.
B. If multicast traffic is received on Po10 Switch1, the traffic is forwarded out on Po1 and Po20.
C. If multicast traffic is received on Po11 and Switch2, the traffic is dropped.
D. If multicast traffic is received on Switch over the vPC peer-link, the traffic is dropped.

Answer: C

NEW QUESTION # 244
An engineer must recover configuration on a Cisco MDS 9000 Series switch from a previous version that was backed up to bootflash and then verify the restoration.
Drag and drop the commands on the left to the correct order on the right.

Answer:

Explanation:

Explanation

NEW QUESTION # 245
An engineer has a primary fabric that is named UCS-A and a secondary fabric that is named UCS-B. A certificate request that has a subject name of sjc2016 for a keyring that is named kr2016 needs to be created.
The cluster IP address is 10.68.68.68.
Which command set creates this certificate request?

A. UCS-B# scope security
UCS-B /security # scope keyring kr2016
UCS-B /security/keyring # set certreq 10.68.68.68 sjc2016
UCS-B /security/keyring* # commit-both
B. UCS-B # scope keyring kr2016
UCS-B /keyring # create certreq ip 10.68.68.68 subject-name sjc2016
UCS-B /keyring* # commit-both
C. UCS-A # scope keyring kr2016
UCS-A /keyring # create certreq 10.68.68.68 sjc2016
UCS-A /keyring* # commit-buffer
D. UCS-A# scope security
UCS-A /security # scope keyring kr2016
UCS-A /security/keyring # create certreq ip 10.68.68.68 subject-name sjc2016 UCS-A /security/keyring* # commit-buffer

Answer: D

Explanation:
Section: Security

NEW QUESTION # 246
Which two actions should be taken before an upgrade is started on a Cisco MDS switch? (Choose two.)

A. back up the configuration
B. free up space on the USB3 device by deleting old Cisco NX-OS image files
C. disable Cisco Fabric Services
D. make the primary supervisor the active supervisor
E. check the impact of the upgrade using the show install all impact command

Answer: A,E

Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/5_2/upgrade/guides/nx-os/ upgrade.html

NEW QUESTION # 247
Refer to the exhibit.

Which statement about the default gateway configuration of the vPC is true?

A. N7K-2 acts as the default gateway for all traffic.
B. N7K-1 acts as the default gateway for all traffic.
C. Either switch can act as the active default gateway.
D. N7K-2 forwards traffic that is destined for the default gateway by using the peer link.

Answer: C

NEW QUESTION # 248
An engineer needs to monitor ingress traffic that arrives at interface Ethernet 1/3 that belongs to a Cisco Nexus 5600 Series Switch. The traffic analyzer machine located at interface Ethernet 1/5 is already monitoring other production, and the traffic analyzer must not be impacted by the traffic captured from the interface Eth1/3. The operations team allocated a traffic budget for the new monitoring session of 1 Gbps to meet this requirement Which set of commands configures the SPAN session?

A. Option C
B. Option B
C. Option D
D. Option A

Answer: D

Explanation:

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5600/sw/system_management/7x/ b_5600_System_Mgmt_Config_7x/configuring_span.html

NEW QUESTION # 249
Which two methods are available to manage an ACI REST API session authentication when a user is unauthenticated? (Choose two.)

A. GET to aaaListDomains
B. POST to aaaLogin
C. GET aaaRefresh
D. POST to aaaUserLogin
E. DELETE to aaaLogout

Answer: B,C

Explanation:
Section: Automation
Explanation/Reference:

NEW QUESTION # 250
Drag and drop the storage technologies from the left onto the correct descriptions on the right.

Answer:

Explanation:

NEW QUESTION # 251
A network engineer must restore the running configuration on a Cisco Nexus 5000 Series Switch to an existing snapshot called "stable1". The restore procedure should proceed only if no errors occur. Which configuration should be used to accomplish this goal?