2022 Latest HP HPE0-J58 Real Exam Dumps PDF
HPE0-J58 Exam Dumps, HPE0-J58 Practice Test Questions
HP HPE0-J58 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
NEW QUESTION 14
A customer has a requirement to provide disaster recovery for an application. The application has an RPO of
30 mins, with an RTO of 15 mins. How can HPE 3PAR Remote Copy help meet the customer's specified requirements in the most cost effective manner?
- A. by using Periodic Asynchronous Replication with an interval of 15 mins
- B. by using Synchronous Long Distance Mode
- C. by using Synchronous Replication
- D. by using Streaming Asynchronous replication with an interval of 15 mins
Answer: C
Explanation:
Explanation
NEW QUESTION 15
A customer needs a data recovery solution for their HPE 3PAR array. They have the following requirements:
* RPO needs to be within three hours
* RTO needs to be within three hours
* There is no need for offsite data archive
* They will have a limited maintenance window
Which solution meets all of the customer needs?
- A. HPE 3PAR StoreServ with RMC
- B. HPE StoreOnce
- C. HPE StoreAll
- D. HPE StoreEver
Answer: A
NEW QUESTION 16
A customer has an HPE Nimble Storage array. They plan to add a second HPE Nimble Storage array to their existing group.
What is the expected write behavior to a volume once the new array is added to the same pool as the existing array?
- A. Data will continue to write to the first array until there is 40% free space available, and then alternate writes between the two arrays
- B. Data will be written to the new array until it is the same percent full as the original array
- C. Data will immediately start to alternate writes between the two arrays
- D. Data will be stripped and automatically re-balanced across the two arrays
Answer: B
NEW QUESTION 17
A customer requires an all-flash solution that will scale out, with multiple arrays for replication. The customer also needs the solution to provide more data per terabyte of flash storage than competing solutions.
Which HPE program should you leverage in your solution to help meet the customer's requirements?
- A. HPE Store More Guarantee
- B. HPE Nimble Timeless Storage
- C. HPE Get Thin Guarantee
- D. HPE Get 6-Nines Guarantee
Answer: B
NEW QUESTION 18
A customer has a pair of HPE 3PAR arrays with Synchronous Replication enabled. They need recommendations for deploying the Quorum Witness when implementing Peer Persistence.
What should you recommend to the customer?
- A. The Quorum Witness should be in the primary data center, with FC connectivity to the HPE 3PAR there
- B. The Quorum Witness should be in a third data center, with FC connectivity to both HPE 3PARs
- C. The Quorum Witness should be in the secondary data center, with IP connectivity to the HPE 3PAR there
- D. The Quorum Witness should be in a third data center, with IP connectivity to both HPE 3PARs
Answer: B
Explanation:
Explanation/Reference: https://h20195.www2.hpe.com/v2/GetPDF.aspx/4AA5-8914ENW.pdf
NEW QUESTION 19
Click and drag the steps on the left into the appropriate order on the right to set up an HPE 3PAR array in InfoSight.
Answer:
Explanation:
NEW QUESTION 20
You are discussing a HPE 3PAR Remote Copy solution with your customer. The customer has had a bad experience in their current non-HPE replication solution. Currently the source and target volume properties on the array must be identical on both sides and cannot be changed without re-creating the volumes.
What should you explain to the customer?
- A. All data from the source array will automatically be replicated to the target array using AI to determine the best location where to store the data
- B. Flash data can only be replicated to flash media on the target array, while spinning media can be replicated to flash media
- C. Source and target disk type and RAID level can be different and adapted to changing requirements
- D. On the target array volumes can be pinned into cache for maximum flexibility
Answer: B
NEW QUESTION 21
How does the HPE Nimble Storage product strategy support a customer's investment protection requirements for today and the future?
- A. by supporting the repurposing of obsolete array controllers as high-density servers
- B. by supporting replication between current and previous-generation array models
- C. by supporting replication with arrays from other vendors
- D. by supporting the implementation of third party cache, spinning media, and flash media
Answer: D
NEW QUESTION 22
A customer needs a data recovery solution for their HPE 3PAR array. They have the following requirements:
RPO needs to be within three hours
RTO needs to be within three hours
There is no need for offsite data archive
They will have a limited maintenance window
Which solution meets all of the customer needs?
- A. HPE 3PAR StoreServ with RMC
- B. HPE StoreOnce
- C. HPE StoreAll
- D. HPE StoreEver
Answer: A
NEW QUESTION 23
A customer is interested in using HPE InfoSight Cross-stack Analytics for VMware.
Where does the customer need to make the appropriate configuration changes to makes this active?
- A. HPE 3PAR SSMC
- B. HPE InfoSight Portal
- C. HPE 3PAR Service Processor
- D. VMware vCenter
Answer: B
NEW QUESTION 24
What is one of the advantages of protecting HPE 3PAR File Persona with RMC?
- A. Transparent failover is offered If clients are using SMB 3.0, even if you recover to another 3PAR
- B. Single file recovery is possible
- C. Backup throughput will be considerably faster than other backup methods
- D. MS SQL data consistency is provided
Answer: C
NEW QUESTION 25
A customer has a requirement to provide disaster recovery for an application. The application has an RPO of 30 mins, with an RTO of 15 mins. How can HPE 3PAR Remote Copy help meet the customer's specified requirements in the most cost effective manner?
- A. by using Periodic Asynchronous Replication with an interval of 15 mins
- B. by using Synchronous Long Distance Mode
- C. by using Synchronous Replication
- D. by using Streaming Asynchronous replication with an interval of 15 mins
Answer: C
NEW QUESTION 26
You completed the HPE Nimble storage replication partnership in a customer environment.
When you test the network connection from the primary partner to the secondary partner, the test fails; when you test the connection from the secondary to the primary partner, the test is successful.
What is the most likely cause of the failure?
- A. The secondary array network ports are misconfigured
- B. The secondary partner name is not configured properly
- C. The primary partner name is not configured properly
- D. The test can only be performed from the secondary array
Answer: B
Explanation:
Explanation/Reference:
NEW QUESTION 27
A customer requests a proposal for two HPE 3PAR arrays using asynchronous periodic replication. The customer has two data centers, and the current bandwidth available for replication between the data centers is
200 Mb/s.
The customer is replicating 30TB, and the change rate is 3% in 24 hours. The customer wants to achieve an RPO of 10 minutes.
Which statement about bandwidth and replication is true for the customer requirements?
- A. The bandwidth is sufficient, and replication must happen every 5 minutes
- B. The bandwidth is sufficient, and replication must happen every 10 minutes
- C. The bandwidth will have to be increased, and replication must happen every 10 minutes
- D. The bandwidth will have to be increased, and replication must happen every 5 minutes
Answer: D
NEW QUESTION 28
A customer has two HPE Nimble arrays that are replication partners. The replication schedule is set to every hour.
After replication completed at 1:00pm, the array at the primary site suffers a power failure.
Applications were failed over successfully by the administrators, and production continued on the secondary site array as designed.
At 3:00pm, the power was restored to the primary site array.
What does the administrator need to do first to restore services in the primary site?
- A. Perform handover from the secondary array to the primary array
- B. Create a new replication partnership from the secondary array to the primary array
- C. Create a new replication partnership from the primary array to the secondary array
- D. Perform a failback of the existing replication partnership to the primary array
Answer: A
NEW QUESTION 29
A customer wants to enable an automated failover for their two existing HPE 3PAR solutions, which are located in two different sites. Each solution has an All-inclusive Single-System Software license.
Which component is required to enable this function?
- A. All-inclusive Multi-System Software License
- B. Dark fibre connection between the sites
- C. Fibre channel Bridges to connect the disk shelfs
- D. Additional HPE 3PAR system as quorum witness
Answer: A
NEW QUESTION 30
Refer to the exhibit.
A customer is considering a new HPE 3PAR for the purpose of implementing deduplication and compression.
Based on the output returned from the NinjaCrawler tool, what do you know about the customer data?
- A. This data has a block size which is not optimal for HPE 3PAR
- B. This data has a video data workload profile
- C. This data is from an HP-UX system
- D. This data is a good candidate for HPE 3PAR deduplication
Answer: C
NEW QUESTION 31
Refer to the Exhibit.
A customer with an existing HPE Nimble installation sends you the output shown. The administrator who initially set up the replication has left the company.
They ask you what the current RPO level for their replication is. How should you respond?
- A. They have an RPO of two minutes
- B. They need to send a screenshot of the volumes tab
- C. They have an RPO of four minutes
- D. They need to verify the RPO level from the host vc-ms-fileserver
Answer: C
NEW QUESTION 32
A customer requests a proposal for two HPE 3PAR arrays using asynchronous periodic replication. The customer has two data centers, and the current bandwidth available for replication between the data centers is
200 Mb/s.
The customer is replicating 30TB, and the change rate is 3% in 24 hours. The customer wants to achieve an RPO of 10 minutes.
Which statement about bandwidth and replication is true for the customer requirements?
- A. The bandwidth is sufficient, and replication must happen every 5 minutes
- B. The bandwidth is sufficient, and replication must happen every 10 minutes
- C. The bandwidth will have to be increased, and replication must happen every 10 minutes
- D. The bandwidth will have to be increased, and replication must happen every 5 minutes
Answer: D
Explanation:
Explanation
NEW QUESTION 33
Which advantage is provided by HPE 3PAR Remote Copy across all replication modes?
- A. Remote Copy support up to 100ms latency over all transport layers
- B. automatic recovery of array failure independent of Remote copy topology
- C. all Remote Copy topologies yield identical RPO and RTO
- D. support of all Remote Copy topologies
Answer: D
NEW QUESTION 34
Refer to the exhibit, which reflects the Bill of Materials (BOM) configuration for one datacenter.
A customer needs a new storage solution of two HPE 3PAR 8440 arrays. The customer's environment consists of eight physical servers in each data center attached to the SAN and one StoreOnce 3540 system with two FC I/O cards. The distance between data centers is less than 75 meters.
What should you add the BOM to meet the customer needs?
- A. one HPE 3PAR StoreServ 8000 Direct Connect Cabling Option for Drive Enclosure for each HPE 3PAR
8440 - B. one HPR 3PAR StoreServ AC RPS Service Processor
- C. one HPE SN3000B SAN Switch 12-port Upgrade E-LTU per switch, appropriate number of SFPs and cables
- D. one HPE 25m Mini SAS High Density Active Optical Cable for each HPE 3PAR 8440
Answer: B
NEW QUESTION 35
......
PDF (New 2022) Actual HP HPE0-J58 Exam Questions: https://www.actual4test.com/HPE0-J58_examcollection.html
Dumps Moneyack Guarantee - HPE0-J58 Dumps UpTo 90% Off: https://drive.google.com/open?id=1iHpKLi-G076UD9irE9Q7NmI9UZoRWul0