Real HPE0-J58 are Uploaded by Actual4test provide 2021 Latest HPE0-J58 Practice Tests Dumps.
All HPE0-J58 Dumps and Designing Multi-Site HPE Storage Solutions Training Courses Help candidates to study and pass the Designing Multi-Site HPE Storage Solutions Exams hassle-free!
NEW QUESTION 21
Refer to the exhibit, which reflects the Bill of Materials (BOM) configuration for one datacenter.
A customer needs a new storage solution of two HPE 3PAR 8440 arrays. The customer's environment consists of eight physical servers in each data center attached to the SAN and one StoreOnce 3540 system with two FC I/O cards. The distance between data centers is less than 75 meters.
What should you add the BOM to meet the customer needs?
- A. one HPE 3PAR StoreServ 8000 Direct Connect Cabling Option for Drive Enclosure for each HPE
3PAR 8440 - B. one HPE SN3000B SAN Switch 12-port Upgrade E-LTU per switch, appropriate number of SFPs and cables
- C. one HPR 3PAR StoreServ AC RPS Service Processor
- D. one HPE 25m Mini SAS High Density Active Optical Cable for each HPE 3PAR 8440
Answer: C
NEW QUESTION 22
You are proposing a replication solution to a customer. A competitor offers a solution based on storage virtualization appliances.
What should you stress about an HPE 3PAR replication solution in regard to the competitor's proposal?
- A. It means less overhead for management and monitoring
- B. It offers best-in-class backup and restore capabilities
- C. It offers superior virtualization of 3rd party storage arrays
- D. It will add on-the-fly encryption and compression to data being replicated outside the customer's DC
Answer: A
NEW QUESTION 23
A customer has a requirement to provide disaster recovery for an application. The application has an RPO of
30 mins, with an RTO of 15 mins. How can HPE 3PAR Remote Copy help meet the customer's specified requirements in the most cost effective manner?
- A. by using Synchronous Replication
- B. by using Synchronous Long Distance Mode
- C. by using Streaming Asynchronous replication with an interval of 15 mins
- D. by using Periodic Asynchronous Replication with an interval of 15 mins
Answer: A
Explanation:
Explanation
NEW QUESTION 24
A customer wants to implement a disaster recovery plan for their current HPE 3PAR array datA. They have obtained a remote site 10km away their primary site. They have performed bandwidth testing, and have confirmed their RTT is approximately 100ms. The customer needs to provide data replication to assure the best data availability they can achieve. Which synchronization method meets their needs?
- A. Synchronous Remote Copy
- B. Peer Persistence
- C. Asynchronous Periodic Remote Copy
- D. Asynchronous Streaming
Answer: C
NEW QUESTION 25
A customer has standardized on Windows Server. They need to ensure that application and storage will move between sites as one during automated or manual failover. Which HPE 3PAR integrated solution should you recommend to the customer as a preventative measure?
- A. Cluster Extension (CLX)
- B. Serviceguard Metrocluster
- C. Site Recovery Manager
- D. Peer Persistence
Answer: A
Explanation:
Explanation/Reference:
Reference: https://tdhpe.techdata.eu/Documents/TDAS-Integrated%20Systems/Technical%20White%
20Paper_HPE%20ConvergedSystem%20700.pdf?epslanguage=en
NEW QUESTION 26
A customer has two data centers in a metropolitan areA. The link between the data centers is IP-based and satisfies the bandwidth and latency requirements. They have the following requirements:
* Transparently and automatically failover and fall back between sites
* Provide block and file access
* Block access must provide connectivity for fibre channel and iSCSi hosts
* All-Flash storage solution
You plan to propose a design based on HPE 3PAR storage arrays.
What would be the most cost-effective model that meets the customer needs?
- A. HPE 3PAR 9450
- B. HPE 3PAR 8450
- C. HPE 3PAR 20450
- D. HPE 3PAR 20850
Answer: B
NEW QUESTION 27
A customer wants an HPE 3PAR array with about 400,000 IOPS and over 6000 MBs per second through - put at 16K block size. What should you consider in your design?
- A. Configure the HA-enclosure to protect against enclosure failure
- B. Ensure that the write IO service time on the array is under 2ms
- C. Focus the configuration on the effective capacity ratio rather than data reduction ratio
- D. Adhere to the initiators per port, initiators per system, and fan-in/fan-out limits in SPOCK
Answer: C
NEW QUESTION 28
A customer has two HPE Nimble arrays that are replication partners. The customer suffers a complete outage on the source array. What does the administrator need to do to make the most recent snapshot available?
- A. Perform a handover between the arrays
- B. Promote the target snapshot
- C. Demote the source snapshot
- D. Verify the automatic failover occurred
Answer: A
NEW QUESTION 29
A customer has an aging Fibre Channel SAN from one vendor and a separate iSCSI SAN from another vendor. The customer wants to upgrade to a single vendor that will allow them to manage the SAN through a single vendor management console.
Which solution should you recommend?
- A. one HPE Nimble Fibre Channel group federated to an HPE 3PAR for iSCSI
- B. one HPE Nimble iSCSI group federated to an HPE 3PAR for Fibre Channel
- C. one HPE Nimble Storage Fibre Channel Group and one HPE Nimble Storage iSCSI Group
- D. one HPE Nimble Storage Group that has a Fibre Channel port and a ISCSI pool
Answer: C
NEW QUESTION 30
What is one of the advantages of protecting HPE 3PAR File Persona with RMC?
- A. MS SQL data consistency is provided
- B. Transparent failover is offered If clients are using SMB 3.0, even if you recover to another 3PAR
- C. Backup throughput will be considerably faster than other backup methods
- D. Single file recovery is possible
Answer: C
NEW QUESTION 31
A customer has started to load their HPE 3PAR 8450 with data, but are not sure what data reduction they are achieving. They ask you to run analysis and estimate the deduplication ratio of data currently on a virtual volume (VV).
Which CLI command should you use to understand data reduction ratios?
- A. checkvv
- B. showvv
- C. convertvv
- D. tunevv
Answer: A
Explanation:
Explanation/Reference:
Reference: https://manualzz.com/doc/34471724/hpe-3par-adaptive-data-reduction
NEW QUESTION 32
You are designing an HPE 3PAR replication solution for a customer in a metropolitan area that includes two main sites and a third disaster recovery site. The main sites will be in synchronous replication. The disaster recovery site can be asynchronously replicated.
What are two points you should highlight to the customer? (Select two.)
- A. Secondary site volumes paths are active/optimized read/write
- B. Primary site volumes paths are standby read/write
- C. Tertiary site volume paths are active/read only
- D. Quorum Witness at the third site enables automatic failover to the secondary site
- E. Quorum Witness at the third site enables automatic failover to tertiary site
Answer: C,D
NEW QUESTION 33
A customer needs to new storage solution, including replication. The replication solution does not need to provide an RTO or RPO of zero.
The customer suffers from severe VM sprawl and has experienced unidentified storage service-level degradations.
What should you point out during your presentation of the solution?
- A. VMs are always individually visible to the array with automatic enablement of VVOL technology
- B. InfoSight and VM details would help in identifying misbehaving VMs putting a high load on the array
- C. When a storage system is being overloaded, the replication software will automatically move the workload
- D. Hardware-assisted parity generation and deduplication mitigate the changing performance requirements
Answer: A
NEW QUESTION 34
A customer experiences a performance issues and blames the HPE 3PAR array. However, you suspect it is caused by a noisy neighbor situation in the VMware environment. Which approach should you use to find and prove a root cause?
- A. Use Brocade Network Advisor to gather data for analysis
- B. Use the advanced performance reports in SSMC
- C. Use HPE SAF Collect to gather data for SAF Analyze
- D. Use HPE InfoSight Cross Stack Analytics
Answer: B
NEW QUESTION 35
You are starting an assessment to design a new multi-storage environment for a customer. You have collected data on all the current arrays using SAF collector.
What should be the next step in your design process?
- A. Open the .zip file with NinjaSTARS
- B. Send the .zip file to [email protected]
- C. Import the .zip file into OCA
- D. Upload the .zip file to the SAF Portal
Answer: A
NEW QUESTION 36
A customer needs to upgrade their existing HPE 3PAR environment. They ask you to present a solution to gather data from all 200 of their HPE 3PARs arrays, which are spread across the globe. The arrays consist of various generations and OS levels, and they are managed by regional instances of SSMC. What should you present to the customer as a solution?
- A. using the upgrade report tool in HPE InfoSight
- B. using a script based on the HPE 3PAR Web Services API
- C. using an HPE 3PAR CLI script with the checkupgrade command
- D. using the SSMC array configuration reports
Answer: D
NEW QUESTION 37
A customer has started to load their HPE 3PAR 8450 with data, but are not sure what data reduction they are achieving. They ask you to run analysis and estimate the deduplication ratio of data currently on a virtual volume (VV).
Which CLI command should you use to understand data reduction ratios?
- A. checkvv
- B. showvv
- C. convertvv
- D. tunevv
Answer: A
Explanation:
Explanation/Reference: https://manualzz.com/doc/34471724/hpe-3par-adaptive-data-reduction
NEW QUESTION 38
A customer needs to upgrade their existing HPE 3PAR environment. They ask you to present a solution to gather data from all 200 of their HPE 3PARs arrays, which are spread across the globe. The arrays consist of various generations and OS levels, and they are managed by regional instances of SSMC. What should you present to the customer as a solution?
- A. using the upgrade report tool in HPE InfoSight
- B. using a script based on the HPE 3PAR Web Services API
- C. using an HPE 3PAR CLI script with the checkupgrade command
- D. using the SSMC array configuration reports
Answer: D
Explanation:
Explanation/Reference:
Reference: https://support.hpe.com/hpsc/doc/public/display?docId=c05243943
NEW QUESTION 39
......
Valid Way To Pass HP's HPE0-J58 Exam with : https://www.actual4test.com/HPE0-J58_examcollection.html
Free Test Engine For Designing Multi-Site HPE Storage Solutions Certification Exams: https://drive.google.com/open?id=1iHpKLi-G076UD9irE9Q7NmI9UZoRWul0